Cabinet “U” handles for the standardised 19“- Rack Frame

Elesa+Ganter, makers of standard machine elements, have enlarged their product range by adding cabinet “U” handles for the
standardised 19” - Rack Frame .
The 19” system for drawer boxes has become today’s standard. The boxes hold withdrawable units with a height of 44.45 mm
(1 6/8”) and multiples thereof.

The following hole spacings for cabinet “U” handles have become generally accepted (U = height unit):
1U = 43 mm hole spacing
2U = 55 mm hole spacing
3U = 88 mm hole spacing
4U = 120 mm hole spacing
5U = 180 mm hole spacing
6U = 235 mm hole spacing
For these 19” drawers Ganter offers the GN 425, GN 425.6, GN 427 and GN 427.5 cabinet “U” handles for a wide variety of different uses.
The GN 425 cabinet “U” handles cover a wide range of different types and models. They are supplied in plastic-coated, chromed, burnished steel or in corrosion-resistant stainless steel.
A stainless steel design version is available for all areas with high exposure to corrosive and/or chemical factors (wet areas, food industry, medical engineering, chemical plants).
Washer disks (in stainless steel for stainless steel handles) are enclosed for a perfect seat of the handles, particularly in the event of large holes in the cabinet.
The GN 427 and GN 427.5 cabinet “U” handles are made of drawn profile sections, with the GN 427 cabinet “U” handles made of plastic-coated or anodised aluminium and the GN 427.5 cabinet “U” handles made of stainless steel. Both standard elements are suitable for higher loads.
The manufacturing process (bending) allows the production of special lengths in relatively small unit quantities.


Download