Close
M-BAND-10
M-BAND-10
Magnetic band
Length and angle modes
Length and angle modes

78711-R,20
78710-R,10
78712-R,50
orGN 300-30-B5-SW;60
GN 612-5-M12x1,5-A;40
DIN 172-B10,5-20-A;50
ISO 8675-M8x1-04-BT;10
The magnetic band M-BAND-10 is made of two separate parts: the magnetic band and the cover strip. The magnetic band is made of a magnetic tape, a carrier strip and an adhesive tape (Fig.2). The cover strip is made of a protection strip and an adhesive tape (Fig.1).
Magnetic band with length different from the standard executions shown in the table, up to 25 m maximum.
Technical data | |
---|---|
Precision | ± 40 μm |
Material | magnetic tape: nitrilic rubber |
carrier strip: stainless steel | |
cover strip: stainless steel | |
acrylic adhesive tape | |
Length | magnetic band: 10 mm ± 0.20 mm |
cover strip: 10 mm ± 0.20 mm | |
Thickness | magnetic band: 1.43 ± 0.15 mm |
cover strip: 0.23 mm | |
Magnetic pole pitch | 5 mm |
Operating and storage temperature | -40 ÷ +100 °C |
Linear thermic expansion factor | 17 x 10-6/K |
Your request was sent and will be answered as fast as possible.