GN 422-T1-K
GN 422
Cabinet U-Handles
Zinc Die Casting, with Electrical Switching Function
With cable, with 1 button
Zinc Die Casting, with Electrical Switching Function
With cable, with 1 button

78711-R,20
78710-R,10
78712-R,50
orGN 300-30-B5-SW;60
GN 612-5-M12x1,5-A;40
DIN 172-B10,5-20-A;50
ISO 8675-M8x1-04-BT;10
Zinc die casting ZD
Powder coated
Stainless steel AISI 304
Polyurethan PUR
Black
Plastic
Crystal-clear Polycarbonate (PC)
Cabinet U-handles GN 422 come with one or two push buttons. Each button has a changeover switch and integrated LED ring lighting.
When the button is pressed, an electrical control impulse to switch off a machine, for example, can be triggered based on the wiring of the contacts (NC or NO).
Independent whether or not the button is actuated, the integrated LED ring lighting shines either red or green depending on the polarity of connections 1 and 2 of the LED.
The cabinet U-handle is functional and highly compact and can be used for any application due to its universal design.
Electrical and Mechanical Properties | ||
Button | - | ![]() |
Contacts | Changeover contact, snap contact | |
Contact material | Silver alloy | |
Switching voltages | max. 125 V (plug) | |
max. 240 V (cable) | ||
Switching current | max. 3 A | |
mechanical lifespan | 106 switching cycles | |
electrical lifespan | 50.000 switching cycles (under full load) | |
LED ring lighting | 24 V DC ± 10 % / 7 mA | ![]() |
Operating voltage / | ||
operating current | ||
bi-color (red / green) | ||
Category of use (button) | AC 15: 24 V AC / 1 A / DC 13: 24 V DC / 0.7 A | according to IEC 60947-5-1 |
AC 15: 110 V AC / 1 A / DC 13: 110 V DC / 0.2 A | ||
AC 15: 220 V AC / 0.5 A / DC 13: 220 V DC / 0.1 A | ||
- | - | |
AC: 120 V AC / 5 A / DC: 12 V DC / 1 A | according to UL 508 | |
AC: 240 V AC / 3 A | ||
Connection type | - | ![]() |
Cable (K) | PUR cable with open stranded wires (2 m or 5 m) | |
or | - | |
Plug connector (S) | 5-pin connector M12x1 with PUR cable 0.25 m | |
Approvals, conformities | ![]() | |
CE declaration |
The holes must be free of burrs to prevent damage to the cable.
Your request was sent and will be answered as fast as possible.