Blizu
Download
Radna temperatura
Tabela daje opšte indikacije za izbor PEB i PES proizvoda.
Upotreba na temperaturama između 60 i 100 °C se toleriše, ali podrazumeva značajno smanjenje tehničkih specifikacija.
Produženo izlaganje maksimalnoj radnoj temperaturi takođe može dovesti do značajnog pogoršanja mehaničkih karakteristika u poređenju sa nominalnim vrednostima.
| Radna temperatura | PEB-80 / PES-80 (plava) | PEB-90 / PES-90 (narandžasta) | PEB-92 / PES-92 (crvena) |
| -40 °C / -20 °C | ▲ | ▲ | ▲ |
| -20 °C / +15 °C | ● | ● | ▲ |
| +15 °C / +60 °C | ● | ● | ● |
| +60 °C / +100 °C | ❒ | ❒ | ❒ |
| > 100 °C | ▲ | ▲ | ▲ |
● Preporučena upotreba; ❒ Tolerisana upotreba; ▲ Nepoželjna upotreba
-
Generals
-
1. Plastic materials
- 1.1 Mechanical strength
- 1.2 Thermal resistance
- 1.3 Strength and surface hardness
- 1.4 Resistance to chemical agents
- 1.5 Resistance to atmospheric agents and uv rays
- 1.6 Flame resistance
- 1.7 Electrical properties
- 1.8 Surface finish and cleanability
- 1.9 Compliance with international standards
- 1.10 Competence of Elesa+Ganter technical department
- 2. Metal materials
- 3. Other materials
- 4. Machining tolerances
- 5. Fixed handles
- 6. Assembly measures
- 7. Special executions
- 8. Colours
- 9. Test values
-
10. Technical tables
- 10.1 Conversion tables
- 10.2 DIN 79 Square holes and shafts
- 10.3 DIN 6885 Keyways
- 10.4 GN 110 and GN 110.1 Transversal holes
- 10.5 DIN 13 ISO Metric threads
- 10.6 DIN 228 Cylindrical GAS-BSP threads
- 10.7 DIN EN ISO 898-1 | DIN EN 20898-2 Strenght values
- 10.8 DIN ISO 286 ISO-Fundamental tolerances
- 10.9 IP Protection Classification
- 10.10.1 PFB | PRB Thread locking with jamming action Polyamide patch coating/ Polyamide complete coating
- 10.10.2 MVK Thread locking gluing Micro encapsulation precote 80 (red)
- 10.11 Stainless Steel characteristics
- 10.12 Surface treatments
- 10.13 Carbon steel, zinc alloys, aluminium, brass characteristics
- 10.14.1 Duroplast, elastomer, technopolymer and rubber characteristics
- 10.14.2 Duroplast, elastomer, technopolymer and rubber characteristics
- 10.14.3 Duroplast, elastomer, technopolymer and rubber characteristics
- 10.15 Load ratings U-Handles
- 10.16 Load ratings metal hinges
- 10.17 Strength of indexing plungers
- 10.18 Assembly sets GN 965 and GN 968
- 11. Vibration-damping elements
-
1. Plastic materials
- Hygienic design
- Operating Elements
- Ručice za upravljanje
- Elementi za podešavanje, obrtni tasteri
- Rotary controls
- Elementi za zaključavanje
- Joints
- Transmission elements
- Levelling elements
- Hinges
- Bravice
- Toggle, power and hook clamps
- Hidraulični elementi
- Tube clamp connectors
- Castors and wheels
- Magnets
- Transportna traka komponenata
- Linear slides
- Amortizer oscilacija
- Vacuum components
- Opruge od elastomera