Transparent polyamide based (PA-T) technopolymer. High resistance to shocks, solvents, oils with additives, aliphatic and aromatic hydrocarbons, petrol, naphtha, phosphoric esters.
Avoid contact with alcohol or detergents containing alcohol.
Zinc-alloy, sandblasted and treated finish.
Screws, nuts and washers
Step-shaped for the seal on the reservoir walls and NBR synthetic rubber O-ring screw underhead.
White lacquered aluminium. The housing, in the appropriate external rear slot, guarantees the best protection from direct contact with fluid.
It can be taken out from the inclined side, before assembly to allow the insertion of level lines or words.
- HCX-P: without thermometer.
- HCX/T-P: with incorporated thermometer.
When fitting is not possible from the inside of the reservoir and the walls are not thick enough, the screws can be used together with Fast Mounting Kit
Maximum continuous working temperature
90°C (with oil).