SFP+a Breather caps with splash guard and flat dipstick, technopolymer up to 100°C


  • RoHS
  • PA
  • g10030

Description

Main specifications

Material

Polyamide based (PA) technopolymer.
  • Cover: RAL 2004 orange, semi-matte finish, marked "OIL".
  • Threaded connector: black, semi-matte finish.

Packing ring

NBR synthetic rubber.

Flat dipstick

Flat section phosphatised steel. On request and for sufficient quantities dipstick can be supplied in different lengths and/or complete with MAX-MIN level lines.

Splash guard

Technopolymer.

Standard executions

  • SFP+a: without air filter (black splash guard).
  • SFP+F+a: D = 31, 42 and 57 with "tech-fil" air filter in zinc-plated steel wire (orange splash guard); D = 70 with "tech-foam" air filter in polyurethane foam mesh (polyester base), air filtration 40 µ (grey splash guard).
  • SFP.70-BA+F+a: with "tech-foam" air filter in polyurethane foam mesh (polyester base), air filtration 40 µ (grey splash guard).
Zinc-plated steel sheet bayonet.
Chrome-plated steel safety chain.

Maximum continuous working temperature

100°C.

General information

Features and applications

SFP+a breather caps come complete with splash guard device (ELESA originale design) that prevents oil loss and are particularly suitable for use where oil is violently agitated and could be splashed against the breather cap.

Technical data

Air flow rate for each model can be determined from the graph calculating the difference between the pressure inside and outside the reservoir.

Special executions

Special executions on request

  • Cover, RAL 2004 orange, without "OIL" mark.
  • Black cover with or without "OIL" mark.
Breather caps with splash guard and flat dipstick, technopolymer up to 100°C SFP+a
SFP+a
Filter
Code Description d D L d2 h a Weight
53946 SFP.30-16x1.5+a M16x1.5 31 29.5 10 9.5 188 30
53966 SFP.30-18x1.5+a M18x1.5 31 29.5 10 9.5 188 30
53983 SFP.30-20x1.5+a M20x1.5 31 29.5 12 9.5 188 31
53993 SFP.30-22x1.5+a M22x1.5 31 29.5 12 9.5 188 31
53936 SFP.30-1/4+a G 1/4 31 29.5 8 9.5 188 30
54011 SFP.30-3/8+a G 3/8 31 29.5 10 9.5 188 30
54111 SFP.30-1/2+a G 1/2 31 29.5 12 9.5 188 30
54211 SFP.40-3/4+a G 3/4 42 36.5 18 11.5 184 42
54311 SFP.40-1+a G 1 42 36.5 18 11.5 184 44
54411 SFP.57-1¼+a G1 1/4 57 44 28 16 184 63
54511 SFP.57-1½+a G1 1/2 57 44 28 16 184 65
54877 SFP.70-2+a G 2 70 59 23 17 179 106
SFP+a
Filter
Code Description d D L d2 d3 h h1 a Weight
53956 SFP.30-16x1.5+F+a M16x1.5 31 29.5 10 - 9.5 - 188 34
53976 SFP.30-18x1.5+F+a M18x1.5 31 29.5 10 - 9.5 - 188 34
53989 SFP.30-20x1.5+F+a M20x1.5 31 29.5 12 - 9.5 - 188 32
53999 SFP.30-22x1.5+F+a M22x1.5 31 29.5 12 - 9.5 - 188 33
53939 SFP.30-1/4+F+a G 1/4 31 29.5 8 - 9.5 - 188 31
54031 SFP.30-3/8+F+a G 3/8 31 29.5 10 - 9.5 - 188 33
54131 SFP.30-1/2+F+a G 1/2 31 29.5 12 - 9.5 - 188 34
54231 SFP.40-3/4+F+a G 3/4 42 36.5 18 - 11.5 - 184 50
54331 SFP.40-1+F+a G 1 42 36.5 18 - 11.5 - 184 50
54431 SFP.57-1¼+F+a G1 1/4 57 44 28 - 16 - 184 75
54531 SFP.57-1½+F+a G1 1/2 57 44 28 - 16 - 184 75
54853 SFP.70-3/4+F+a G 3/4 70 63 16 35 15 6 173 100
54863 SFP.70-1¼+F+a G1 1/4 70 59 23 - 17 - 179 105
54879 SFP.70-2+F+a G 2 70 59 23 - 17 - 179 110
SFP+a
Filter
Code Description D L d2 d4 h a Weight
54883 SFP.70-BA+F+a 70 56 30 39 14 179 100