SMN. SMW. Pressurised breather caps with double valve and threaded connector, steel up to 100°C


  • RoHS
  • g10030

Description

Main specifications

Material

  • Cover: steel sheet, with chrome plating superficial treatment.
  • Flange: zinc-plated steel sheet.
  • Threaded connector: zinc-plated steel.

Packing ring

NBR synthetic rubber.

Overpressure valve 

Technopolymer with NBR synthetic rubber O-ring and stainless steel spring.
Set at around 0.350 bar (0.700 bar on request).

Suction valve 

Technopolymer sealing disk with NBR synthetic rubber O-ring and stainless steel spring.
Set at around 0.030 bar.

Ring-shaped air filter

Tech-foam 40 µ.

Filter setting spring (only for SMN.)

Zinc-plated steel.

Standard executions

  • SMN.: breather cap.
  • SMW.: double-valve breather cap.

Maximum continuous working temperature

100°C.

General information

Features and applications

Double-valve breather cap SMW. creates a pressure plenum chamber right above the oil level within given limit conditions in order to avoid any reservoir deformation.
Advantages:
  • it reduces reservoir air volume intake keeping clean fluid and filter;
  • it improves suction pump action under working conditions reducing cavitation phenomenon;
  • it prevents fluid leakage when the system is part of a mobile unit;
  • it reduces foam in fluid.

Technical data

Air flow rate for the different executions of breather caps can be obtained from the diagram on the basis of the difference of air pressure inside and outside the reservoir.

Working in an hydraulic circuit

Special executions

Special executions on request

With dipstick for fluid level indication (only for SMW.).
Pressurised breather caps with double valve and threaded connector, steel up to 100°C SMN. SMW.
SMN. - SMW.
Filter
Code Description d D L d2 h h1 Weight
156833 SMN.46-1/4-F40 G 1/4 47 51 7 10 5 57
156883 SMN.80-3/4-F40 G 3/4 81 70 17 16 12 239
SMN. - SMW.
Filter
Code Description d D L d2 h h1 Weight
156983 SMW.80-3/4-F40-350mb G 3/4 81 70 17 16 12 308