DIN 6304 Tommy screws with fixed bar


  • RoHS

Description

Specification

Types

  • Type E: without thrust pad
Steel
Tensile strength class 5.8
  • blackened
  • Thrust point hardened

Information

The thrust point of these screws DIN 6304 is designed to be used with or without a thrust pad for clamping.
The snap ring is a simple and quick method to connect the thrust pad to the tommy screw.
Instead of DIN 6311 a thrust pad GN 6311.1can be used. In that case the tommy screw and the thrust pad have to be ordered separately

Technical information

Hint for installation (Type F)

The thrust pad has to be held at an angle allowing the circlip to drop to the bottom of its groove with the split end downwards. The thrust point is then offered up tp the spit end of the circlip at the lowest possible angle and pressed home.
Tommy screws with fixed bar DIN 6304
DIN 6304
Filter
Description d1 l1 d2 d3 d4 h11 l2 l3 l4 l5 z ≈ Weight
DIN 6304-M6-40-E M 6 40 12 5 4.5 10 50 10 - 5.4 22
DIN 6304-M6-50-E M 6 50 12 5 4.5 10 50 10 - 5.4 23
DIN 6304-M8-50-E M 8 50 14 6 6 12 60 15 - 6.8 40
DIN 6304-M8-60-E M 8 60 14 6 6 12 60 15 - 6.8 43
DIN 6304-M10-60-E M 10 60 18 8 8 14 80 20 - 8.2 81
DIN 6304-M10-70-E M 10 70 18 8 8 14 80 20 - 8.2 88
DIN 6304-M12-70-E M 12 70 20 10 8 18 100 20 - 8.6 138
DIN 6304-M12-80-E M 12 80 20 10 8 18 100 20 - 8.6 146
DIN 6304-M16-75-E M 16 75 24 12 12 20 120 20 - 10.6 249
DIN 6304-M16-90-E M 16 90 24 12 12 20 120 20 - 10.6 265
DIN 6304-M16-110-E M 16 110 24 12 12 20 120 20 - 10.6 292
DIN 6304-M20-75-E M 20 75 30 16 15.5 28 140 20 - 12.4 470
DIN 6304-M20-90-E M 20 90 30 16 15.5 28 140 20 - 12.4 497
DIN 6304-M20-110-E M 20 110 30 16 15.5 28 140 20 - 12.4 540
DIN 6304-M6-40-F M 6 40 12 5 4.5 10 50 10 2.2 5.4 26
DIN 6304-M6-50-F M 6 50 12 5 4.5 10 50 10 2.2 5.4 27
DIN 6304-M8-50-F M 8 50 14 6 6 12 60 15 3 6.8 49
DIN 6304-M8-60-F M 8 60 14 6 6 12 60 15 3 6.8 52
DIN 6304-M10-60-F M 10 60 18 8 8 14 80 20 3.6 8.2 100
DIN 6304-M10-70-F M 10 70 18 8 8 14 80 20 3,6 8.2 105
DIN 6304-M12-70-F M 12 70 20 10 8 18 100 20 4.5 8.6 171
DIN 6304-M12-80-F M 12 80 20 10 8 18 100 20 4.5 8.6 179
DIN 6304-M16-75-F M 16 75 24 12 12 20 120 20 5.3 10.6 260
DIN 6304-M16-90-F M 16 90 24 12 12 20 120 20 5.3 10.6 324
DIN 6304-M16-110-F M 16 110 24 12 12 20 120 20 5.3 10.6 354
DIN 6304-M20-75-F M 20 75 30 16 15.5 28 140 20 5.6 12.4 551
DIN 6304-M20-90-F M 20 90 30 16 15.5 28 140 20 5.6 12.4 602
DIN 6304-M20-110-F M 20 110 30 16 15.5 28 140 20 5.6 12.4 644