GN 900.3 Connecting sets X-Z for adjustable slide units GN 900


  • RoHS

Description

Specification

Types

  • Type P: Mounting the Z-axis via connecting plate and additional plate
  • Type S: Direct mounting of the Z-axis via connecting plate
Aluminium
anodized, natural colour
Grub screw DIN 913
Steel, zinc plated
Socket head cap screws DIN 912
Stainless Steel

Information

With connecting sets GN 900.3 two adjustable slide units  GN 900 can be combined to produce an X-Z axis configuration.
The combination is created by using two connection plates which eliminate any type of fixing holes in the slides. At the same time the adjustable slide unit with the Z-axis can, to a limited extent (vertically to the Z-axis), still be adjusted.
In the case of a slide configuration of the Z-axis parallel to the reference axis (type P) an adaptor plate (complete with a fastening set, small fixing plates and socket head cap screws) is required which is included in the set.
The small fixing plates serves for the 90° alignment of the Z-axis and fine adjustment of the adaptor plate (Type P).
All parts required to make up a set are included.

Installation example

Connecting sets X-Z for adjustable slide units GN 900 GN 900.3
GN 900.3
Filter
Description b Size of
the slide
l1 d1 d2 l2 l3 l4 s Weight
GN 900.3-30-30-P 30 30 M 4 M 2.5 41 17 6 6 47
GN 900.3-50-50-P 50 50 M 5 M 3 67 32 8 8 185
GN 900.3-80-80-P 80 80 M 6 M 4 105 52 13 12 680
GN 900.3-120-120-P 120 120 M 8 M 5 145 82 13 16 1770
GN 900.3-30-30-S 30 30 M 4 M 2.5 41 17 6 6 50
GN 900.3-50-50-S 50 50 M 5 M 3 67 32 8 8 76
GN 900.3-80-80-S 80 80 M 6 M 4 105 52 13 12 278
GN 900.3-120-120-S 120 120 M 8 M 5 145 82 13 16 779