DIN 98 Revolving handles


Description

Specification

Types

  • Type D: with plain shaft
  • Type E: with threaded shaft
Steel ST
zinc plated, blue passivated
Aluminium AL
glossy finish
Plastic KT
Technopolymer (Polyamide PA)
  • temperature resistant up to 110 °C
  • black, matt finish
Spindle Steel
zinc plated, blue passivated

Information

This handle is supplied unassembled so that the shaft can be press fitted or screwed into a tapped blind bore prior to assembly.
During mounting, easy blows with a soft hammer are sufficient to drive the handle into place.

Technical information

Revolving handles  DIN 98
DIN 98
Filter
Description d1 d2 h8 d3 d4 h13 l1 l2 l3 A/F Weight
DIN 98-AL-16-D 16 7 - 10 49 11 5.5 3 33
DIN 98-KT-16-D 16 7 - 10 49 11 5.5 3 33
DIN 98-ST-16-D 16 7 - 10 49 11 5.5 3 33
DIN 98-AL-20-D 20 8 - 13 61 13 6 4 63
DIN 98-KT-20-D 20 8 - 13 61 13 6 4 63
DIN 98-ST-20-D 20 8 - 13 61 13 6 4 63
DIN 98-AL-25-D 25 10 - 16 75 14 8 5 110
DIN 98-KT-25-D 25 10 - 16 75 14 8 5 110
DIN 98-ST-25-D 25 10 - 16 75 14 8 5 110
DIN 98-AL-32-D 32 13 - 20 95 21 10.5 6 217
DIN 98-KT-32-D 32 13 - 20 95 21 10.5 6 217
DIN 98-ST-32-D 32 13 - 20 95 21 10.5 6 217
DIN 98-AL-36-D 36 16 - 22 106 26 11 8 321
DIN 98-ST-36-D 36 16 - 22 106 26 11 8 321
DIN 98-AL-16-E 16 - M 6 10 49 11 5.5 3 33
DIN 98-KT-16-E 16 - M 6 10 49 11 5.5 3 33
DIN 98-ST-16-E 16 - M 6 10 49 11 5.5 3 33
DIN 98-AL-20-E 20 - M 8 13 61 13 6 4 50
DIN 98-KT-20-E 20 - M 8 13 61 13 6 4 50
DIN 98-ST-20-E 20 - M 8 13 61 13 6 4 50
DIN 98-AL-25-E 25 - M 10 16 75 14 8 5 110
DIN 98-KT-25-E 25 - M 10 16 75 14 8 5 110
DIN 98-ST-25-E 25 - M 10 16 75 14 8 5 110
DIN 98-AL-32-E 32 - M 12 20 95 21 10.5 6 240
DIN 98-KT-32-E 32 - M 12 20 95 21 10.5 6 240
DIN 98-ST-32-E 32 - M 12 20 95 21 10.5 6 240
DIN 98-AL-36-E 36 - M 16 22 106 26 11 8 299
DIN 98-ST-36-E 36 - M 16 22 106 26 11 8 299