CFM. Hinges SUPER-technopolymer


Description

Main specifications

Material

Glass-fibre reinforced polyamide based (PA) SUPER-technopolymer.

Colour

  • CFM.: black, matte finish.
  • CFM-CLEAN: white similar to RAL 9002, matte finish.

Rotating pin

AISI 303 stainless steel.

Standard executions

  • CFM-p: nickel-plated steel threaded studs.
  • CFM-SH: pass-through holes for countersunk head screws.
  • CFM-CH: pass-through holes for cylindrical head screws with washer type UNI 6592.
  • CFM-p-SH: nickel-plated steel threaded studs and pass-through holes for countersunk head screws.
  • CFM-p-CH: nickel-plated steel threaded studs and pass-through holes for cylindrical head screws with UNI 6592 washer.
  • CFM.60-SL-CH: pass-through slotted hole for shorted cylindrical head screws UNI 9327 which allow adjustment during clamping.

General information

Rotation angle (approximate value)

Max 270° (-90° and +180° being 0° the condition where the two interconnected surfaces are on the same plane).
Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance.
To choose the convenient type and the right number of hinges for your application, see the Guidelines.

Resistance testsAXIAL STRESSRADIAL STRESS90° ANGLED STRESS
DescriptionMax limit static load
Sa [N]
Max limit static load
Sr [N]
Max limit static load
S90 [N]
CFM.30 SH-4140017001000
CFM.30 CH-413001700850
CFM.40 p-M5x12200019001000
CFM.40 SH-5190019001280
CFM.40 CH-5190016001000
CFM.40 p-M5x12-SH-5190019001000
CFM.40 p-M5x12-CH-5190016001000
CFM.50 p-M6x12234025602100
CFM.50 SH-6263024001720
CFM.50-63 SH-680016001000
CFM.50-76 SH-660015001000
CFM.50 CH-6286024101360
CFM.50 p-M6x12-SH-6234024001720
CFM.50 p-M6x12-CH-6234024101360
CFM.60 p-M8x14.5300039402130
CFM.60 SH-8332029603070
CFM.60 CH-8344028102170
CFM.60 p-M8x14.5-SH-8300029602130
CFM.60 p-M8x14.5-CH-8300028102130
CFM.60-45-SH-6292030101310
CFM.60-SL-CH-696012001360
The max static load is the value above which the material may break thus prejudicing the hinge functionality use. Obviously, a suitable factor, according to the importance and the safety level of the specific application must be applied to this value.
Valid values also for CFM-CLEAN.
Hinges SUPER-technopolymer CFM.
CFM.
Filter
Code Description l B d2 l f±0.25 f1 ±0.25 H h1 h2 h3 b1 b2 d d3 d4 d5 C
[Nm] p#
C
[Nm] SH/CH#
Weight
425411 CFM.30-SH-4 30 30 - - 18 18 7 4 3.5 - 10.5 10.5 2.5 4.5 8.5 - - 3 11
425412 CFM.30-CH-4 30 30 - - 18 18 7 4 3.5 1.3 10.5 10.5 2.5 4.5 - 7.5 - 3 11
425521 CFM.40-p-M5x12 40 40 M5 12 25 25 9 5.5 5 - 14 14 4 - - - 5 - 26
425511 CFM.40-SH-5 40 40 - - 25 25 9 5.5 5 - 14 14 4 5.5 10.5 - - 3 14
425512 CFM.40-CH-5 40 40 - - 25 25 9 5.5 5 1.7 14 14 4 5.5 - 10.5 - 5 14
425531 CFM.40-p-M5x12-SH-5 40 40 M5 12 25 25 9 5.5 5 - 14 14 4 5.5 10.5 - 5 3 20
425532 CFM.40-p-M5x12-CH-5 40 40 M5 12 25 25 9 5.5 5 1.7 14 14 4 5.5 - 10.5 5 5 20
425621 CFM.50-p-M6x12 50 50 M6 12 30 30 11.5 6.5 6 - 18 18 6 - - - 5 - 50
425611 CFM.50-SH-6 50 50 - - 30 30 11.5 6.5 6 - 18 18 6 6.5 12.5 - - 5 30
425851 CFM.50-63-SH-6 50 63 - - 30 43 11.5 6.5 6 - 18 31 6 6.5 12.5 - - 5 37
425856 CFM.50-76-SH-6 50 76 - - 30 56 11.5 6.5 6 - 31 31 6 6.5 12.5 - - 5 42
425612 CFM.50-CH-6 50 50 - - 30 30 11.5 6.5 6 3 18 18 6 6.5 - 12.5 - 5 30
425631 CFM.50-p-M6x12-SH-6 50 50 M6 12 30 30 11.5 6.5 6 - 18 18 6 6.5 12.5 - 5 5 40
425632 CFM.50-p-M6x12-CH-6 50 50 M6 12 30 30 11.5 6.5 6 3 18 18 6 6.5 - 12.5 5 5 40
425721 CFM.60-p-M8x14.5 60 60 M8 14.5 36 36 15 8.5 8 - 21 21 8 - - - 5 - 101
425711 CFM.60-SH-8 60 60 - - 36 36 15 8.5 8 - 21 21 8 8.5 16.5 - - 5 57
425712 CFM.60-CH-8 60 60 - - 36 36 15 8.5 8 4 21 21 8 8.5 - 16.5 - 5 57
425731 CFM.60-p-M8x14.5-SH-8 60 60 M8 14.5 36 36 15 8.5 8 - 21 21 8 8.5 16.5 - 5 5 79
425732 CFM.60-p-M8x14.5-CH-8 60 60 M8 14.5 36 36 15 8.5 8 4 21 21 8 8.5 - 16.5 5 5 79
425812 CFM.60-45-SH-6 60 70 - - 34 45 14.5 8 7.5 - 26 26 8 6.5 12.5 - - 5 62
425822 CFM.60-SL-CH-6 60 70 - - 34 40 14.5 8 7.5 4 26 26 8 6.5 10.5 - - 4 61
CFM.
Filter
Code Description l B f±0.25 f1 ±0.25 H h1 h2 b1 b2 d d3 d4 C#
[Nm]
Weight
425441 CFM.30-SH-4-CLEAN 30 30 18 18 7 4 3.5 10.5 10.5 2.5 4.5 8.5 3 11
425541 CFM.40-SH-5-CLEAN 40 40 25 25 9 5.5 5 14 14 4 5.5 10.5 3 14
425641 CFM.50-SH-6-CLEAN 50 50 30 30 11.5 6.5 6 18 18 6 6.5 12.5 5 30
425741 CFM.60-SH-8-CLEAN 60 60 36 36 15 8.5 8 21 21 8 8.5 16.5 5 57