GN 161.2 Hinges detachable / Zinc die casting


  • RoHS

Description

Specification

Types

  • Type R: fixed bearing (pin) right
  • Type L: fixed bearing (pin) left
Zinc die casting
plastic coated
black, RAL 9005, textured finish SW
silver, RAL 9006, textured finish SR

Information

Hinges GN 161.2 are a variant with highly attractive design. The fixing screws are invisible.
During the load tests, the hinges were gradually loaded and relieved at room temperature with incrementally increasing force. For the specified values, an insignificant permanent deformation remained after relieving the load which had no effect on the function and appearance. In most cases, the failure loads are multiples of the specified value.
The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use. Environmental influences and aging may influence these values.

Technical information

Hinges detachable / Zinc die casting GN 161.2
Black (RAL 9005) Black
Silver (RAL 9006) Silver
GN 161.2
Filter
Description b1 l1 b2 d l2 l3 l4 l5 m1 m2 m3 t Radial load
in N
Axial load
in N
Weight
GN 161.2-32-63-R-SR 32 63 15 M 5 17 31 6.1 10 19 50.8 17 10 700 2000 125
GN 161.2-32-63-R-SW 32 63 15 M 5 17 31 6.1 10 19 50.8 17 10 700 2000 125
GN 161.2-32-63-L-SR 32 63 15 M 5 17 31 6.1 10 19 50.8 17 10 700 2000 125
GN 161.2-32-63-L-SW 32 63 15 M 5 17 31 6.1 10 19 50.8 17 10 700 2000 124