GN 810 Vertical acting toggle clamps Steel / Stainless Steel, with horizontal mounting base


Description

Specification

Types

  • Type A: U-bar version, with two flanged washers
  • Type C: U-bar version, with two flanged washers and GN 708.1 spindle assembly
  • Type E: Solid bar version, with clasp

Version in Steel

  • Case-hardened Steel C10, zinc plated, blue passivated
  • Bearing pins tempered
  • Bearing rivets (for size 230 and up), case-hardened
All moving parts
lubricated with special grease
Hand grip
High quality, oil resistant red plastic
Spindle assembly GN 708.1, Type A
  • Steel, zinc plated
  • Rubber tip 85 Shore A

Version in Stainless Steel NI

Stainless Steel AISI 304
All moving parts
lubricated with special grease
Hand grip
High quality, oil resistant red plastic
Spindle assembly GN 708.1, Type A
  • Stainless Steel AISI 304
  • Rubber tip 85 Shore A

Information

GN 810 vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position.
Vertical acting toggle clamps in the U-bar version with two flanged washers (Type A) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included for Type C.
Type E version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, or by utilizing the bar in conjunction with the GN 809 clamp mounts to hold the work piece in place.

Accessory

  • Spindle assemblies
  • GN 801 clamp mounts for toggle clamps (for Type A)
  • GN 809 clamp mounts for toggle clamps (for Type E)
GN 810 Steel
GN 810
Filter
Description Size FH in N a ≈ b1 b2 b3 d1 d2 h1 h2 h3 h4 h5 l1 l2 l3 max. l4 m1 m2 m3 m4 r ≈ s1 s2 w Weight
GN 810-75-A 75 750 20 29 34 5.2 M 5 4.5 98 20.5 11 - - 66.5 31.5 - - 15 16 24 24 62.5 2 - - 98
GN 810-130-A 130 1050 28 35 42 6.2 M 6 5.5 142 28 16 - - 85 42 - - 12.5 19 27 29 79.5 2.5 - - 220
GN 810-230-A 230 2000 40 43 45 8.5 M 8 6.5 168 33.5 18 - - 110.5 58 - - 19 20 32 32 104 3 - - 370
GN 810-330-A 330 2400 43 50 65 10.5 M 10 8.5 195 43 22 - - 129 66 - - 29 32 45 46 122 3.5 - - 601
GN 810-430-A 430 2800 64 58 65 12.5 M 12 8.5 247 55.5 26 - - 164 88 - - 32 32 45 45 156 4 - - 1060
GN 810-530-A 530 4500 90 80 95 12.5 M 12 12.5 303 84.5 32 - - 223 125 - - 50 51 70 70 212 7 - - 2000
GN 810-75-C 75 750 20 29 34 5.2 M 5 4.5 98 20.5 11 19 5.5 66.5 31.5 - 45 15 16 24 24 62.5 2 - 15 100
GN 810-130-C 130 1050 28 35 42 6.2 M 6 5.5 142 28 16 25.5 11.3 85 42 - 55 12.5 19 27 29 79.5 2.5 - 17.5 230
GN 810-230-C 230 2000 40 43 45 8.5 M 8 6.5 168 33.5 18 30 9.5 110.5 58 - 68 19 20 32 32 104 3 - 20 400
GN 810-330-C 330 2400 43 50 65 10.5 M 10 8.5 195 43 22 37 15 129 66 - 77 29 32 45 46 122 3.5 - 19 600
GN 810-430-C 430 2800 64 58 65 12.5 M 12 8.5 247 55.5 26 43 23 164 88 - 100 32 32 45 45 156 4 - 33 1100
GN 810-530-C 530 4500 90 80 95 12.5 M 12 12.5 303 84.5 32 49 52 223 125 - 100 50 51 70 70 212 7 - 27 2180
GN 810-75-E 75 750 - 29 34 - M 5 4.5 98 20.5 11 - - 67 - 41 - 15 16 24 24 62.5 2 4 - 106
GN 810-130-E 130 1050 - 35 42 - M 6 5.5 142 28 16 - - 86 - 54 - 12.5 19 27 29 79.5 2.5 5 - 220
GN 810-230-E 230 2000 - 43 45 - M 8 6.5 168 33.5 18 - - 112 - 73 - 19 20 32 32 104 3 6 - 401
GN 810-330-E 330 2400 - 50 65 - M 10 8.5 195 43 22 - - 130.5 - 86 - 29 32 45 46 122 3.5 7 - 580
GN 810-430-E 430 2800 - 58 65 - M 12 8.5 247 55.5 26 - - 166 - 114 - 32 32 45 45 156 4 10 - 1090
GN 810-530-E 530 4500 - 80 95 - M 12 12.5 303 84.5 32 - - 225 - 152 - 50 51 70 70 212 7 10 - 2066
GN 810-NI Stainless Steel
GN 810-NI
Filter
Description Size FH in N a ≈ b1 b2 b3 d1 d2 h1 h2 h3 h4 h5 l1 l2 l3 max. l4 m1 m2 m3 m4 r ≈ s1 s2 w Weight
GN 810-75-A-NI 75 750 20 29 34 5.2 M 5 4.5 98 20.5 11 - - 66.5 31.5 - - 15 16 24 24 62.5 2 - - 92
GN 810-130-A-NI 130 1050 28 35 42 6.2 M 6 5.5 142 28 16 - - 85 42 - - 12.5 19 27 29 79.5 2.5 - - 228
GN 810-230-A-NI 230 2000 40 43 45 8.5 M 8 6.5 168 33.5 18 - - 110.5 58 - - 19 20 32 32 104 3 - - 379
GN 810-75-C-NI 75 750 20 29 34 5.2 M 5 4.5 98 20.5 11 19 5.5 66.5 31.5 - 45 15 16 24 24 62.5 2 - 15 92
GN 810-130-C-NI 130 1050 28 35 42 6.2 M 6 5.5 142 28 16 25.5 11.3 85 42 - 55 12.5 19 27 29 79.5 2.5 - 17.5 228
GN 810-230-C-NI 230 2000 40 43 45 8.5 M 8 6.5 168 33.5 18 30 9.5 110.5 58 - 68 19 20 32 32 104 3 - 20 390
GN 810-75-E-NI 75 750 - 29 34 - M 5 4.5 98 20.5 11 - - 67 - 41 - 15 16 24 24 62.5 2 4 - 100
GN 810-130-E-NI 130 1050 - 35 42 - M 6 5.5 142 28 16 - - 86 - 54 - 12.5 19 27 29 79.5 2.5 5 - 230
GN 810-230-E-NI 230 2000 - 43 45 - M 8 6.5 168 33.5 18 - - 112 - 73 - 19 20 32 32 104 3 6 - 389