GN 831 Toggle latches Steel / Stainless Steel


Description

Specification

Types

  • Type A: without safety catch
  • Type S: with safety catch
  • Type SV: for safety catch with padlock

Identification No.

  • No. 1: long Type
  • No. 2: short Type

Version in Steel ST

zinc plated, blue passivated

Version in Stainless Steel NI

  • Parts in sheet metal AISI 304
  • Clamping hook / pin AISI 303

Information

GN 831 toggle latches are used among others for the secure holding of flaps and container lids. The clamps will lock securely over the centre and are thus vibration proof.
The stroke w1 of the clamping hook can pull the parts to be clamped together by up to 6 mm. The range w2 can be adjusted on the M6 threaded spindle at the clamping hook.
The types S and SV prevent unwanted release of the toggle latch.
Screws with low head height such as DIN 6912 are used to fix the toggle latches.
The load specified in the table are simply guide line values for a nominal static pulling force which the lock can withstand. Depending on the conditions under which these toggle latches are used such as vibration or shock loads, the holding capacity can be adversely affected.
The catch bracket is included.

Technical Information

GN 831 Steel
GN 831
Filter
Description Size FH in N b1 b2 b3 b4 d h1 h2 h3 h4 l1 min. l2 min. l3 l4 min. l5 min. m1 m2 m3 m4 r w1 w2 Weight
GN 831-100-A-ST-1 100 1000 25.5 22 26 14 4.2 18.5 8.5 - - 67 56 19.5 - - 14.3 7 4 8 51 5.5 12 55
GN 831-100-A-ST-2 100 1000 25.5 22 26 14 4.2 18.5 8.5 - - - - 19.5 31 54 14.3 7 4 8 51 5.5 12 40
GN 831-100-S-ST-1 100 1000 25.5 22 26 14 4.2 18.5 8.5 21.5 - 74 63 19.5 - - 14.3 7 4 8 51 5.5 8 60
GN 831-100-S-ST-2 100 1000 25.5 22 26 14 4.2 18.5 8.5 21.5 - - - 19.5 38 61 14.3 7 4 8 51 5.5 8 58
GN 831-100-SV-ST-1 100 1000 25.5 22 26 14 4.2 18.5 8.5 - 25.5 67 56 19.5 - - 14.3 7 4 8 51 5.5 12 55
GN 831-100-SV-ST-2 100 1000 25.5 22 26 14 4.2 18.5 8.5 - 25.5 - - 19.5 31 54 14.3 7 4 8 51 5.5 12 55
GN 831-NI Stainless Steel
GN 831-NI
Filter
Description Size FH in N b1 b2 b3 b4 d h1 h2 h3 h4 l1 min. l2 min. l3 l4 min. l5 min. m1 m2 m3 m4 r w1 w2 Weight
GN 831-100-A-NI-1 100 1000 25.5 22 26 14 4.2 18.5 8.5 - - 67 56 19.5 - - 14.3 7 4 8 51 5.5 12 54
GN 831-100-A-NI-2 100 1000 25.5 22 26 14 4.2 18.5 8.5 - - - - 19.5 31 54 14.3 7 4 8 51 5.5 12 54
GN 831-100-S-NI-1 100 1000 25.5 22 26 14 4.2 18.5 8.5 21.5 - 74 63 19.5 - - 14.3 7 4 8 51 5.5 8 50
GN 831-100-S-NI-2 100 1000 25.5 22 26 14 4.2 18.5 8.5 21.5 - - - 19.5 38 61 14.3 7 4 8 51 5.5 8 49
GN 831-100-SV-NI-1 100 1000 25.5 22 26 14 4.2 18.5 8.5 - 25.5 67 56 19.5 - - 14.3 7 4 8 51 5.5 12 57
GN 831-100-SV-NI-2 100 1000 25.5 22 26 14 4.2 18.5 8.5 - 25.5 - - 19.5 31 54 14.3 7 4 8 51 5.5 12 55