ELESA+GANTER

GN 860 Pneumatic toggle clamps

You need to log in to save favorites

Log in
  • RoHS
Pneumatic toggle clamps GN 860 ×
Pneumatic toggle clamps GN 860
    SPEEDYBLOCK

Description

Specification

Types

  • Type AP3: U-bar version, with two flanged washers
  • Type CP3: U-bar version, with two flanged washers and GN 708.1 spindle assembly
  • Type EP3: Solid bar version, with clasp

Coding

  • Coding M: Magnetic piston (for size 200 and up)
Parts in sheet metal
case-hardened steel C10
zinc plated, blue passivated
Bearing pins
hardened
Bearing rivets (for size 200 and up)
case-hardened
Air cylinder bearing pins
case-hardened
Double-action air cylinder
max. pressure 6 bar
All moving parts
lubricated with special grease
Spindle assembly  GN 708.1 ,Type A
  • Steel, zinc plated
  • Rubber tip 85 Shore A

Information

The clamping principle of GN 860 pneumatic toggle clamps is identical in construction and dimensions to the manually operated GN 810 vertical toggle clamps.
To ensure an extended life of the mechanical parts as well as the air cylinders the operating pressure should not exceed 6 bar.
GN 860 pneumatic toggle clamps are also available in sizes 200 and up as a version M (magnetic piston). In conjunction with GN 896.1 / GN 896.2 proximity switches, the piston position can be sensed and the generated impulse can be used to transmit an electrical signal.

Accessory

  • Spindle assemblies
  • GN 801 clamp mounts for toggle clamps (for Type AP3)
  • GN 809 clamp mounts for toggle clamps (for Type EP3)
Pneumatic toggle clamps GN 860
GN 860
Adjust table
Filter
Description Size FH in N FS in N a ≈ b1 b2 d1 d2 d3 Inside Ø
connection tube		 h1 ≈ h2 h3 h4 h5 l1 ≈ l2 ≈ l3 ≈ l4 ≈ max. l5 m1 m2 m3 m4 m5 m6 r ≈ s w Weight
GN 860-70-AP3 70 700 480 20 42 5.5 M 5 4.5 G 1/8 4 51 21 11 - - 163 92 33 - - 24 7 15 24 6.5 16 62.5 - - 499
GN 860-125-AP3 125 1600 600 28 47.5 6.5 M 6 5.5 G 1/8 4 70.5 30 14 - - 200.5 150 40 - - 27 11.25 12.5 29 8 19 79 - - 727
GN 860-200-AP3 200 2200 800 40 53 8.5 M 8 6.5 G 1/8 4 79 36 18 - - 247 160 59 - - 32 12 19 32 11.5 20 104 - - 1220
GN 860-300-AP3 300 2700 1300 42 74 10.5 M 10 8.5 G 1/4 6 98 48 20 - - 305 195.5 66 - - 45 10.5 29 46 8.5 32 122 - - 1600
GN 860-400-AP3 400 3000 1350 66 74 12.5 M 12 8.5 G 1/4 8 107.5 51 22 - - 361 216 94 - - 45 10 32 45 10 32 156 - - 3265
GN 860-70-CP3 70 700 480 20 42 5.5 M 5 4.5 G 1/8 4 51 21 11 19 6.3 163 92 33 - 45 24 7 15 24 6.5 16 62.5 - 15 500
GN 860-125-CP3 125 1600 600 28 47.5 6.5 M 6 5.5 G 1/8 4 70.5 30 14 23.5 13.5 200.5 150 40 - 55 27 11.25 12.5 29 8 19 79 - 19.5 700
GN 860-200-CP3 200 2200 800 40 53 8.5 M 8 6.5 G 1/8 4 79 36 18 30 12.5 247 160 59 - 68 32 12 19 32 11.5 20 104 - 20 1220
GN 860-300-CP3 300 2700 1300 42 74 10.5 M 10 8.5 G 1/4 6 98 48 20 35 20 305 195.5 66 - 77 45 10.5 29 46 8.5 32 122 - 21 2200
GN 860-400-CP3 400 3000 1350 66 74 12.5 M 12 8.5 G 1/4 8 107.5 51 22 39 18.5 361 216 94 - 100 45 10 32 45 10 32 156 - 37 3376
GN 860-70-EP3 70 700 480 - 42 - M 5 4.5 G 1/8 4 51 21 11 - - 163 92 - 41 - 24 7 15 24 6.5 16 62.5 4 - 400
GN 860-125-EP3 125 1600 600 - 47.5 - M 6 5.5 G 1/8 4 70.5 30 14 - - 200.5 150 - 54 - 27 11.25 12.5 29 8 19 79 5 - 723
GN 860-200-EP3 200 2200 800 - 53 - M 8 6.5 G 1/8 4 79 36 18 - - 247 160 - 75 - 32 12 19 32 11.5 20 104 6 - 1225
GN 860-300-EP3 300 2700 1300 - 74 - M 10 8.5 G 1/4 6 98 48 20 - - 305 195.5 - 85 - 45 10.5 29 46 8.5 32 122 8 - 2350
GN 860-400-EP3 400 3000 1350 - 74 - M 12 8.5 G 1/4 8 107.5 51 22 - - 361 216 - 120 - 45 10 32 45 10 32 156 10 - 3250
GN 860-200-AP3-M 200 2200 800 40 53 8.5 M8 6.5 G 1/8 4 79 36 18 - - 247 160 59 - - 32 12 19 32 11.5 20 104 - - 1225
GN 860-300-AP3-M 300 2700 1300 42 74 10.5 M10 8.5 G 1/4 6 98 48 20 - - 305 195.5 66 - - 45 10.5 29 46 8.5 32 122 - - 2148
GN 860-400-AP3-M 400 3000 1350 66 74 12.5 M12 8.5 G 1/4 8 107.5 51 22 - - 361 216 94 - - 45 10 32 45 10 32 156 - - 3235
GN 860-200-CP3-M 200 2200 800 40 53 8.5 M8 6.5 G 1/8 4 79 36 18 30 12.5 247 160 59 - 68 32 12 19 32 11.5 20 104 - 20 1250
GN 860-300-CP3-M 300 2700 1300 42 74 10.5 M10 8.5 G 1/4 6 98 48 20 35 20 305 195.5 66 - 77 45 10.5 29 46 8.5 32 122 - 21 2218
GN 860-400-CP3-M 400 3000 1350 66 74 12.5 M12 8.5 G 1/4 8 107.5 51 22 39 18.5 361 216 94 - 100 45 10 32 45 10 32 156 - 37 3346
GN 860-200-EP3-M 200 2200 800 - 53 - M8 6.5 G 1/8 4 79 36 18 - - 247 160 - 75 - 32 12 19 32 11.5 20 104 6 - 1245
GN 860-300-EP3-M 300 2700 1300 - 74 - M10 8.5 G 1/4 6 98 48 20 - - 305 195.5 - 85 - 45 10.5 29 46 8.5 32 122 8 - 2160
GN 860-400-EP3-M 400 3000 1350 - 74 - M12 8.5 G 1/4 8 107.5 51 22 - - 361 216 - 120 - 45 10 32 45 10 32 156 10 - 3226

These products could be interesting for you as well