GN 875 Swing clamps pneumatic, in block version


  • RoHS

Description

Specification

Coding

  • Type L: swiveling left
  • Type R: swiveling right

Types

  • Type A: Clamping arm with slotted hole and 2 flanged washers
  • Type AC: Clamping arm with slotted hole, 2 flanged washers and GN 708.1 spindle assembly
  • Type B: Clamping arm with threaded hole
  • Type F: Adapter flange
  • Type N: without clamping arm
Aluminum
hard anodized
wear-resistant surface
Double-action air cylinder
max. pressure 6 bar
Socket cap screw DIN 912
Steel, zinc plated, blue passivated
Washer ISO 7092
Steel, zinc plated, blue passivated
  • Steel, zinc plated
  • Rubber tip 85 Shore A

Information

Swing clamps GN 875 are used when the clamping point for inserting and removing the workpiece must be freely accessible on top.
During the clamping action, the arm is first swiveled by 90° and lowered, followed by the linear tensioning motion. The workpiece clamping must take place within the clamping stroke.
The angle orientation of the tensioning arm can be set arbitrarily during mounting on the swing clamp. When tightening the screw, the piston rod must not experience any torque. The clamping arm must therefore be held to prevent twisting.
The swing clamps are equipped with a magnet ring piston and are therefore pre-fitted for end stop detection via sensor.

Accessory

  • Toggle clamp spindle assemblies GN 708.1 
Swing clamps pneumatic, in block version GN 875
GN 875
Filter
Description Size d1 Fs in N a b1 b2 b3 b4 b5 d2 d3 d4 H7 d5 d6 d7 h1 h2 h3 l1 l2 l3 l4 l5 l6 m1 m2 m3 m4 m5 m6 m7 t1 t2 t3 t4 t5 w1 Clamping stroke w1 Stroke w2 Max. tightening torque
in Nm
Weight
GN 875-25-14-L-A 25 14 170 20 55 35 11.3 - - M 5 M 8 6 - - - 78 82 135 15.5 17 17 33 48 - 40 44.5 30 20 50 - - 4.5 15 10 10 - 14 27 - 9 439
GN 875-25-14-R-A 25 14 170 20 55 35 11.3 - - M 5 M 8 6 - - - 78 82 135 15.5 17 17 33 48 - 40 44.5 30 20 50 - - 4.5 15 10 10 - 14 27 - 9 439
GN 875-32-16-L-A 32 16 270 25 60 45 14.5 - - G 1/8 M 8 6 - - - 90 95 153 20 18 20.5 40 55 - 45 51 30 30 65 - - 6 20 15 15 - 14 30 - 18 733
GN 875-32-16-R-A 32 16 270 25 60 45 14.5 - - G 1/8 M 8 6 - - - 90 95 153 20 18 20.5 40 55 - 45 51 30 30 65 - - 6 20 15 15 - 14 30 - 18 733
GN 875-40-16-L-A 40 16 450 25 70 55 14.5 - - G 1/8 M 8 6 - - - 90 95 153 24.5 21 21 40 55 - 52 52 30 37 65 - - 7.5 20 15 15 - 15 30 - 18 1007
GN 875-40-16-R-A 40 16 450 25 70 55 14.5 - - G 1/8 M 8 6 - - - 90 95 153 24.5 21 21 40 55 - 52 52 30 37 65 - - 7.5 20 15 15 - 15 30 - 18 1007
GN 875-50-20-L-A 50 20 700 30 85 65 17.5 - - G 1/8 M 10 8 - - - 100 105 172 31 26 26 40 60 - 66 53 40 46 85 - - 6 20 20 15 - 15 32 - 35 1693
GN 875-50-20-R-A 50 20 700 30 85 65 17.5 - - G 1/8 M 10 8 - - - 100 105 172 31 26 26 40 60 - 66 53 40 46 85 - - 6 20 20 15 - 15 32 - 35 1693
GN 875-63-20-L-A 63 20 1100 30 100 80 17.5 - - G 1/8 M 10 8 - - - 100 105 170 38 30 27.5 40 60 - 80 53 40 60 85 - - 7.5 20 20 15 - 15 30 - 35 2359
GN 875-63-20-R-A 63 20 1100 30 100 80 17.5 - - G 1/8 M 10 8 - - - 100 105 170 38 30 27.5 40 60 - 80 53 40 60 85 - - 7.5 20 20 15 - 15 30 - 35 2359
GN 875-25-14-L-AC 25 14 170 20 55 35 11.3 - - M 5 M 8 6 M 6 - - 78 82 135 15.5 17 17 33 48 55 40 44.5 30 20 50 - - 4.5 15 10 10 - 14 27 18 9 455
GN 875-25-14-R-AC 25 14 170 20 55 35 11.3 - - M 5 M 8 6 M 6 - - 78 82 135 15.5 17 17 33 48 55 40 44.5 30 20 50 - - 4.5 15 10 10 - 14 27 18 9 455
GN 875-32-16-L-AC 32 16 270 25 60 45 14.5 - - G 1/8 M 8 6 M 8 - - 90 95 153 20 18 20.5 40 55 68 45 51 30 30 65 - - 6 20 15 15 - 14 30 21 18 767
GN 875-32-16-R-AC 32 16 270 25 60 45 14.5 - - G 1/8 M 8 6 M 8 - - 90 95 153 20 18 20.5 40 55 68 45 51 30 30 65 - - 6 20 15 15 - 14 30 21 18 767
GN 875-40-16-L-AC 40 16 450 25 70 55 14.5 - - G 1/8 M 8 6 M 8 - - 90 95 153 24.5 21 21 40 55 68 52 52 30 37 65 - - 7.5 20 15 15 - 15 30 21 18 1041
GN 875-40-16-R-AC 40 16 450 25 70 55 14.5 - - G 1/8 M 8 6 M 8 - - 90 95 153 24.5 21 21 40 55 68 52 52 30 37 65 - - 7.5 20 15 15 - 15 30 21 18 1041
GN 875-50-20-L-AC 50 20 700 30 85 65 17.5 - - G 1/8 M 10 8 M 10 - - 100 105 172 31 26 26 40 60 77 66 53 40 46 85 - - 6 20 20 15 - 15 32 19 35 1743
GN 875-50-20-R-AC 50 20 700 30 85 65 17.5 - - G 1/8 M 10 8 M 10 - - 100 105 172 31 26 26 40 60 77 66 53 40 46 85 - - 6 20 20 15 - 15 32 19 35 1743
GN 875-63-20-L-AC 63 20 1100 30 100 80 17.5 - - G 1/8 M 10 8 M 10 - - 100 105 170 38 30 27.5 40 60 77 80 53 40 60 85 - - 7.5 20 20 15 - 15 30 19 35 2409
GN 875-63-20-R-AC 63 20 1100 30 100 80 17.5 - - G 1/8 M 10 8 M 10 - - 100 105 170 38 30 27.5 40 60 77 80 53 40 60 85 - - 7.5 20 20 15 - 15 30 19 35 2409
GN 875-25-14-L-B 25 14 170 - 55 35 - 18 - M 5 M 8 6 M 6 - - 78 82 129 15.5 17 17 33 48 - 40 44.5 30 20 - 50 - 4.5 15 10 10 - 14 27 - 9 435
GN 875-25-14-R-B 25 14 170 - 55 35 - 18 - M 5 M 8 6 M 6 - - 78 82 129 15.5 17 17 33 48 - 40 44.5 30 20 - 50 - 4.5 15 10 10 - 14 27 - 9 435
GN 875-32-16-L-B 32 16 270 - 60 45 - 20 - G 1/8 M 8 6 M 8 - - 90 95 147 20 18 20.5 40 55 - 45 51 30 30 - 60 - 6 20 15 15 - 14 30 - 18 724
GN 875-32-16-R-B 32 16 270 - 60 45 - 20 - G 1/8 M 8 6 M 8 - - 90 95 147 20 18 20.5 40 55 - 45 51 30 30 - 60 - 6 20 15 15 - 14 30 - 18 724
GN 875-40-16-L-B 40 16 450 - 70 55 - 20 - G 1/8 M 8 6 M 8 - - 90 95 150 24.5 21 21 40 55 - 52 52 30 37 - 70 - 7.5 20 15 15 - 15 30 - 18 1017
GN 875-40-16-R-B 40 16 450 - 70 55 - 20 - G 1/8 M 8 6 M 8 - - 90 95 150 24.5 21 21 40 55 - 52 52 30 37 - 70 - 7.5 20 15 15 - 15 30 - 18 1017
GN 875-50-20-L-B 50 20 700 - 85 65 - 25 - G 1/8 M 10 8 M 10 - - 100 105 165 31 26 26 40 60 - 66 53 40 46 - 80 - 6 20 20 15 - 15 32 - 35 1677
GN 875-50-20-R-B 50 20 700 - 85 65 - 25 - G 1/8 M 10 8 M 10 - - 100 105 165 31 26 26 40 60 - 66 53 40 46 - 80 - 6 20 20 15 - 15 32 - 35 1677
GN 875-63-20-L-B 63 20 1100 - 100 80 - 25 - G 1/8 M 10 8 M 10 - - 100 105 165 38 30 27.5 40 60 - 80 53 40 60 - 90 - 7.5 20 20 15 - 15 30 - 35 2370
GN 875-63-20-R-B 63 20 1100 - 100 80 - 25 - G 1/8 M 10 8 M 10 - - 100 105 165 38 30 27.5 40 60 - 80 53 40 60 - 90 - 7.5 20 20 15 - 15 30 - 35 2370
GN 875-25-14-L-F 25 14 170 - 55 35 - - 25 M 5 M 8 6 - M 6 - 78 82 134 15.5 17 17 33 48 - 40 44.5 30 20 - - 38 4.5 15 10 10 - 14 27 - 9 402
GN 875-25-14-R-F 25 14 170 - 55 35 - - 25 M 5 M 8 6 - M 6 - 78 82 134 15.5 17 17 33 48 - 40 44.5 30 20 - - 38 4.5 15 10 10 - 14 27 - 9 402
GN 875-32-16-L-F 32 16 270 - 60 45 - - 30 G 1/8 M 8 6 - M 8 - 90 95 154 20 18 20.5 40 55 - 45 51 30 30 - - 45 6 20 15 15 - 14 30 - 18 670
GN 875-32-16-R-F 32 16 270 - 60 45 - - 30 G 1/8 M 8 6 - M 8 - 90 95 154 20 18 20.5 40 55 - 45 51 30 30 - - 45 6 20 15 15 - 14 30 - 18 670
GN 875-40-16-L-F 40 16 450 - 70 55 - - 30 G 1/8 M 8 6 - M 8 - 90 95 154 24.5 21 21 40 55 - 52 52 30 37 - - 45 7.5 20 15 15 - 15 30 - 18 944
GN 875-40-16-R-F 40 16 450 - 70 55 - - 30 G 1/8 M 8 6 - M 8 - 90 95 154 24.5 21 21 40 55 - 52 52 30 37 - - 45 7.5 20 15 15 - 15 30 - 18 944
GN 875-50-20-L-F 50 20 700 - 85 65 - - 32 G 1/8 M 10 8 - M 8 - 100 105 167 31 26 26 40 60 - 66 53 40 46 - - 48 6 20 20 15 - 15 32 - 35 1558
GN 875-50-20-R-F 50 20 700 - 85 65 - - 32 G 1/8 M 10 8 - M 8 - 100 105 167 31 26 26 40 60 - 66 53 40 46 - - 48 6 20 20 15 - 15 32 - 35 1558
GN 875-63-20-L-F 63 20 1100 - 100 80 - - 32 G 1/8 M 10 8 - M 8 - 100 105 165 38 30 27.5 40 60 - 80 53 40 60 - - 48 7.5 20 20 15 - 15 30 - 35 2224
GN 875-63-20-R-F 63 20 1100 - 100 80 - - 32 G 1/8 M 10 8 - M 8 - 100 105 165 38 30 27.5 40 60 - 80 53 40 60 - - 48 7.5 20 20 15 - 15 30 - 35 2224
GN 875-25-14-L-N 25 14 170 - 55 35 - - - M 5 M 8 6 - - M 8 78 82 - 15.5 17 17 33 48 - 40 44.5 30 20 - - - 4.5 15 10 10 14 14 27 - - 398
GN 875-25-14-R-N 25 14 170 - 55 35 - - - M 5 M 8 6 - - M 8 78 82 - 15.5 17 17 33 48 - 40 44.5 30 20 - - - 4.5 15 10 10 14 14 27 - - 398
GN 875-32-16-L-N 32 16 270 - 60 45 - - - G 1/8 M 8 6 - - M 8 90 95 - 20 18 20.5 40 55 - 45 51 30 30 - - - 6 20 15 15 16 14 30 - - 666
GN 875-32-16-R-N 32 16 270 - 60 45 - - - G 1/8 M 8 6 - - M 8 90 95 - 20 18 20.5 40 55 - 45 51 30 30 - - - 6 20 15 15 16 14 30 - - 666
GN 875-40-16-L-N 40 16 450 - 70 55 - - - G 1/8 M 8 6 - - M 8 90 95 - 24.5 21 21 40 55 - 52 52 30 37 - - - 7.5 20 15 15 16 15 30 - - 940
GN 875-40-16-R-N 40 16 450 - 70 55 - - - G 1/8 M 8 6 - - M 8 90 95 - 24.5 21 21 40 55 - 52 52 30 37 - - - 7.5 20 15 15 16 15 30 - - 940
GN 875-50-20-L-N 50 20 700 - 85 65 - - - G 1/8 M 10 8 - - M 10 100 105 - 31 26 26 40 60 - 66 53 40 46 - - - 6 20 20 15 16 15 32 - - 1554
GN 875-50-20-R-N 50 20 700 - 85 65 - - - G 1/8 M 10 8 - - M 10 100 105 - 31 26 26 40 60 - 66 53 40 46 - - - 6 20 20 15 16 15 32 - - 1554
GN 875-63-20-L-N 63 20 1100 - 100 80 - - - G 1/8 M 10 8 - - M 10 100 105 - 38 30 27.5 40 60 - 80 53 40 60 - - - 7.5 20 20 15 16 15 30 - - 2220
GN 875-63-20-R-N 63 20 1100 - 100 80 - - - G 1/8 M 10 8 - - M 10 100 105 - 38 30 27.5 40 60 - 80 53 40 60 - - - 7.5 20 20 15 16 15 30 - - 2220