GN 876 Swing clamps pneumatic, with screw-in thread


  • RoHS

Description

Specification

Coding

  • Type L: swiveling left
  • Type R: swiveling right

Types

  • Type A: Clamping arm with slotted hole and 2 flanged washers
  • Type AC: Clamping arm with slotted hole, 2 flanged washers and GN 708.1 spindle assembly
  • Type B: Clamping arm with threaded hole
  • Type F: Adapter flange
  • Type N: without clamping arm
Aluminum
hard anodized
wear-resistant surface
Double-action air cylinder
max. pressure 6 bar
Socket cap screw DIN 912
Steel, zinc plated, blue passivated
Washer ISO 7092
Steel, zinc plated, blue passivated
  • Steel, zinc plated
  • Rubber tip 85 Shore A

Information

Swing clamps GN 876 are used when the clamping point for inserting and removing the workpiece must be freely accessible on top.
The design allows especially space-saving mounting. The height of the swing clamp can be adjusted via the screw-in thread.
During the clamping action, the arm is first swiveled by 90° and lowered, followed by the linear tensioning motion. The workpiece clamping must take place within the clamping stroke.
The angle orientation of the clamping arm can be set arbitrarily during mounting on the swing clamp. When tightening the screw, the piston rod must not experience any torque. The clamping arm must therefore be held to prevent twisting.

Accessory

Swing clamps pneumatic, with screw-in thread GN 876
GN 876
Filter
Description Size d1 ||FS ||in_N|| a b1 b2 b3 d2 d3 d4 d5 d6 h1 h2 h3 k l1 l2 l3 l4 m1 m2 m3 t w1 Clamping stroke w1 w2 Max. tightening torque
in Nm
Weight
GN 876-25-14-L-A 25 14 170 20 11.3 - - M 40 x 1.5 M 5 - - - 70 74 128 8.9 43 3 16 - 50 - - - 14 28 - 9 287
GN 876-25-14-R-A 25 14 170 20 11.3 - - M 40 x 1.5 M 5 - - - 70 74 128 8.9 43 3 16 - 50 - - - 14 28 - 9 287
GN 876-32-16-L-A 32 16 270 25 14.5 - - M 50 x 1.5 G 1/8 - - - 79 83 141 12.7 54 3 12 - 65 - - - 14 30 - 18 495
GN 876-32-16-R-A 32 16 270 25 14.5 - - M 50 x 1.5 G 1/8 - - - 79 83 141 12.7 54 3 12 - 65 - - - 14 30 - 18 495
GN 876-40-16-L-A 40 16 450 25 14.5 - - M 55 x 1.5 G 1/8 - - - 83 87 144 14.3 58 3 12 - 65 - - - 14 29 - 18 589
GN 876-40-16-R-A 40 16 450 25 14.5 - - M 55 x 1.5 G 1/8 - - - 83 87 144 14.3 58 3 12 - 65 - - - 14 29 - 18 589
GN 876-50-20-L-A 50 20 700 30 17.5 - - M 65 x 1.5 G 1/8 - - - 87 92 156 17.8 61 3 12 - 85 - - - 14 29 - 35 949
GN 876-50-20-R-A 50 20 700 30 17.5 - - M 65 x 1.5 G 1/8 - - - 87 92 156 17.8 61 3 12 - 85 - - - 14 29 - 35 949
GN 876-63-20-L-A 63 20 1100 30 17.5 - - M 80 x 1.5 G 1/8 - - - 92 97 162 20.3 64 3 13 - 85 - - - 15 30 - 35 1429
GN 876-63-20-R-A 63 20 1100 30 17.5 - - M 80 x 1.5 G 1/8 - - - 92 97 162 20.3 64 3 13 - 85 - - - 15 30 - 35 1429
GN 876-25-14-L-AC 25 14 170 20 11.3 - - M 40 x 1.5 M 5 M 6 - - 70 74 128 8.9 43 3 16 55 50 - - - 14 28 18 9 303
GN 876-25-14-R-AC 25 14 170 20 11.3 - - M 40 x 1.5 M 5 M 6 - - 70 74 128 8.9 43 3 16 55 50 - - - 14 28 18 9 303
GN 876-32-16-L-AC 32 16 270 25 14.5 - - M 50 x 1.5 G 1/8 M 8 - - 79 83 141 12.7 54 3 12 68 65 - - - 14 30 21 18 535
GN 876-32-16-R-AC 32 16 270 25 14.5 - - M 50 x 1.5 G 1/8 M 8 - - 79 83 141 12.7 54 3 12 68 65 - - - 14 30 21 18 535
GN 876-40-16-L-AC 40 16 450 25 14.5 - - M 55 x 1.5 G 1/8 M 8 - - 83 87 144 14.3 58 3 12 68 65 - - - 14 29 21 18 623
GN 876-40-16-R-AC 40 16 450 25 14.5 - - M 55 x 1.5 G 1/8 M 8 - - 83 87 144 14.3 58 3 12 68 65 - - - 14 29 21 18 623
GN 876-50-20-L-AC 50 20 700 30 17.5 - - M 65 x 1.5 G 1/8 M 10 - - 87 92 156 17.8 61 3 12 77 85 - - - 14 29 19 35 999
GN 876-50-20-R-AC 50 20 700 30 17.5 - - M 65 x 1.5 G 1/8 M 10 - - 87 92 156 17.8 61 3 12 77 85 - - - 14 29 19 35 999
GN 876-63-20-L-AC 63 20 1100 30 17.5 - - M 80 x 1.5 G 1/8 M 10 - - 92 97 162 20.3 64 3 13 77 85 - - - 15 30 19 35 1479
GN 876-63-20-R-AC 63 20 1100 30 17.5 - - M 80 x 1.5 G 1/8 M 10 - - 92 97 162 20.3 64 3 13 77 85 - - - 15 30 19 35 1479
GN 876-25-14-L-B 25 14 170 - - 18 - M 40 x 1.5 M 5 M 6 - - 70 74 122 8.9 43 3 16 - - 50 - - 14 28 - 9 283
GN 876-25-14-R-B 25 14 170 - - 18 - M 40 x 1.5 M 5 M 6 - - 70 74 122 8.9 43 3 16 - - 50 - - 14 28 - 9 283
GN 876-32-16-L-B 32 16 270 - - 20 - M 50 x 1.5 G 1/8 M 8 - - 79 83 141 12.7 54 3 12 - - 60 - - 14 30 - 18 486
GN 876-32-16-R-B 32 16 270 - - 20 - M 50 x 1.5 G 1/8 M 8 - - 79 83 141 12.7 54 3 12 - - 60 - - 14 30 - 18 486
GN 876-40-16-L-B 40 16 450 - - 20 - M 55 x 1.5 G 1/8 M 8 - - 83 87 144 14.3 58 3 12 - - 70 - - 14 29 - 18 599
GN 876-40-16-R-B 40 16 450 - - 20 - M 55 x 1.5 G 1/8 M 8 - - 83 87 144 14.3 58 3 12 - - 70 - - 14 29 - 18 599
GN 876-50-20-L-B 50 20 700 - - 25 - M 65 x 1.5 G 1/8 M 10 - - 87 92 156 17.8 61 3 12 - - 80 - - 14 29 - 35 933
GN 876-50-20-R-B 50 20 700 - - 25 - M 65 x 1.5 G 1/8 M 10 - - 87 92 156 17.8 61 3 12 - - 80 - - 14 29 - 35 933
GN 876-63-20-L-B 63 20 1100 - - 25 - M 80 x 1.5 G 1/8 M 10 - - 92 97 162 20.3 64 3 13 - - 90 - - 15 30 - 35 1440
GN 876-63-20-R-B 63 20 1100 - - 25 - M 80 x 1.5 G 1/8 M 10 - - 92 97 162 20.3 64 3 13 - - 90 - - 15 30 - 35 1440
GN 876-25-14-L-F 25 14 170 - - - 25 M 40 x 1.5 M 5 - M 6 - 70 74 127 8.9 43 3 16 - - - 38 - 14 28 - 9 250
GN 876-25-14-R-F 25 14 170 - - - 25 M 40 x 1.5 M 5 - M 6 - 70 74 127 8.9 43 3 16 - - - 38 - 14 28 - 9 250
GN 876-32-16-L-F 32 16 270 - - - 30 M 50 x 1.5 G 1/8 - M 8 - 79 83 141 12.7 54 3 12 - - - 45 - 14 30 - 18 432
GN 876-32-16-R-F 32 16 270 - - - 30 M 50 x 1.5 G 1/8 - M 8 - 79 83 141 12.7 54 3 12 - - - 45 - 14 30 - 18 432
GN 876-40-16-L-F 40 16 450 - - - 30 M 55 x 1.5 G 1/8 - M 8 - 83 87 144 14.3 58 3 12 - - - 45 - 14 29 - 18 530
GN 876-40-16-R-F 40 16 450 - - - 30 M 55 x 1.5 G 1/8 - M 8 - 83 87 144 14.3 58 3 12 - - - 45 - 14 29 - 18 530
GN 876-50-20-L-F 50 20 700 - - - 32 M 65 x 1.5 G 1/8 - M 8 - 87 92 156 17.8 61 3 12 - - - 48 - 14 29 - 35 814
GN 876-50-20-R-F 50 20 700 - - - 32 M 65 x 1.5 G 1/8 - M 8 - 87 92 156 17.8 61 3 12 - - - 48 - 14 29 - 35 814
GN 876-63-20-L-F 63 20 1100 - - - 32 M 80 x 1.5 G 1/8 - M 8 - 92 97 162 20.3 64 3 13 - - - 48 - 15 30 - 35 1294
GN 876-63-20-R-F 63 20 1100 - - - 32 M 80 x 1.5 G 1/8 - M 8 - 92 97 162 20.3 64 3 13 - - - 48 - 15 30 - 35 1294
GN 876-25-14-L-N 25 14 170 - - - - M 40 x 1.5 M 5 - - M 8 70 74 - 8.9 43 3 16 - - - - 14 14 28 - - 246
GN 876-25-14-R-N 25 14 170 - - - - M 40 x 1.5 M 5 - - M 8 70 74 - 8.9 43 3 16 - - - - 14 14 28 - - 246
GN 876-32-16-L-N 32 16 270 - - - - M 50 x 1.5 G 1/8 - - M 8 79 83 - 12.7 54 3 12 - - - - 16 14 30 - - 434
GN 876-32-16-R-N 32 16 270 - - - - M 50 x 1.5 G 1/8 - - M 8 79 83 - 12.7 54 3 12 - - - - 16 14 30 - - 434
GN 876-40-16-L-N 40 16 450 - - - - M 55 x 1.5 G 1/8 - - M 8 83 87 - 14.3 58 3 12 - - - - 16 14 29 - - 522
GN 876-40-16-R-N 40 16 450 - - - - M 55 x 1.5 G 1/8 - - M 8 83 87 - 14.3 58 3 12 - - - - 16 14 29 - - 522
GN 876-50-20-L-N 50 20 700 - - - - M 65 x 1.5 G 1/8 - - M 10 87 92 - 17.8 61 3 12 - - - - 16 14 29 - - 810
GN 876-50-20-R-N 50 20 700 - - - - M 65 x 1.5 G 1/8 - - M 10 87 92 - 17.8 61 3 12 - - - - 16 14 29 - - 810
GN 876-63-20-L-N 63 20 1100 - - - - M 80 x 1.5 G 1/8 - - M 10 92 97 - 20.3 64 3 13 - - - - 16 15 30 - - 1290
GN 876-63-20-R-N 63 20 1100 - - - - M 80 x 1.5 G 1/8 - - M 10 92 97 - 20.3 64 3 13 - - - - 16 15 30 - - 1290