GN 910 Heavy duty vertical acting toggle clamps with horizontal mounting base „Longlife“


  • RoHS

Description

Specification

Types

  • Type A: Clamping arm with slotted hole (only sizes 220 and 440)
  • Type E: Clamping arm with bushing
Toggle clamp steel
  • Precision casting
  • blackened
Lever arm steel
  • forged
  • blackened
Parts in sheet metal
  • case-hardened steel
  • blackened
Bearing pins and rivets steel
hardened and ground
All moving parts
lubricated with special grease
Hand grip
High quality, oil resistant red plastic

Information

GN 910 heavy duty vertical acting toggle clamps "Longlife" are an advanced development of GN 810: The steel sheet design of the clamp and lever arms is replaced by precision or die-forged components. The remaining steel sheet parts have been reinforced, bearing pins and rivets are hardened and ground.
These vertical clamps are therefore suitable for applications in which substantial forces occur and in which a long service life is required.
Extensive tests have shown that trouble-free function (under load) is ensured also after one million clamping cycles.
Stepped side washers are included.

Accessory

  • Spindle assemblies
Heavy duty vertical acting toggle clamps with horizontal mounting base „Longlife“ GN 910
GN 910
Filter
Description Size FH in N a b1 b2 b3 d1 d2 d3 h1 h2 h3 h4 l1 l2 l3 m1 m2 m3 r1 r2 s1 s2 Weight
GN 910-220-A 220 2200 32 36 48 6 M 6 6.5 - 136.5 30 16 27 91 51 - 20 32 8 77 - 3.5 - 330
GN 910-440-A 440 4400 34 54 65 10 M 10 8.5 - 215 50 24 45 129.5 66 - 30 45 12 107 - 5 - 1000
GN 910-220-E 220 2200 - 36 48 - M 6 6.5 6.5 136.5 30 16 - 86 - 46 20 32 8 - 72 3.5 6 320
GN 910-440-E 440 4400 - 54 65 - M 10 8.5 10.5 215 50 24 - 129.5 - 66 30 45 12 - 107 5 10 1200
GN 910-850-E 850* 8500 - 75 75 - M 12 10.5 12.5 280 67 30 - 161 - 72 55 55 10 - 133 6 12 2200
GN 910-1540-E 1540* 15400 - 90 100 - M 16 12.5 16.5 330 76.5 35 - 203 - 92.5 65 65 12.5 - 167 8 16 4600