GN 910.1 Heavy duty vertical acting toggle clamps with vertical mounting base „Longlife“


  • RoHS

Description

Specification

Types

  • Type B: Clamping arm with slotted hole (only sizes 220 and 440)
  • Type F: Clamping arm with bushing
Toggle clamp steel
  • Precision casting
  • blackened
Lever arm steel
  • forged
  • blackened
Parts in sheet metal
  • case-hardened steel
  • blackened
Bearing pins and rivets steel
hardened and ground
All moving parts
lubricated with special grease
Hand grip
High quality, oil resistant red plastic

Information

GN 910.1 heavy duty vertical acting toggle clamps "Longlife" are an advanced development of GN 810.1: The steel sheet design of the clamp and lever arms is replaced by precision or die-forged components. The remaining steel sheet parts have been reinforced, bearing pins and rivets are hardened and ground.
These vertical clamps are therefore suitable for applications in which substantial forces occur and in which a long service life is required.
Extensive tests have shown that trouble-free function (under load) is ensured also after one million clamping cycles.
Stepped side washers are included.

Accessory

  • Spindle assemblies
  • GN 801 clamp mounts for toggle clamps (for Type B)
Heavy duty vertical acting toggle clamps with vertical mounting base „Longlife“ GN 910.1
GN 910.1
Filter
Description Size FH in N a b1 b2 b3 b4 d1 d2 d3 h1 h2 h3 h4 l1 l2 l3 m1 m2 m3 r1 r2 s Weight
GN 910.1-220-B 220 2200 32 36 13 6 6 M 6 6.5 - 152 45.5 16 27 91 51 - 20 8 8 77 - - 330
GN 910.1-440-B 440 4400 34 54 20 10 10 M 10 8.5 - 235 69.5 24 45 129.5 66 - 30 10 12 107 - - 1200
GN 910.1-220-F 220 2200 - 36 13 - 6 M 6 6.5 6.5 152 45.5 16 - 86 - 46 20 8 8 - 72 6 325
GN 910.1-440-F 440 4400 - 54 20 - 10 M 10 8.5 10.5 235 69.5 24 - 129.5 - 66 30 10 12 - 107 10 1200
GN 910.1-850-F 850* 8500 - 75 24 - 12 M 12 10.5 12.5 301 88 30 - 161 - 72 55 10 10 - 133 12 2200
GN 910.1-1540-F 1540* 15400 - 90 32 - 16 M 16 12.5 16.5 344 106 35 - 203 - 92.5 65 17.5 12.5 - 167 16 4500