GN 607.3 Indexing plungers for installation in thin walled equipment, with rest position


  • RoHS

Description

Specification

Guide Steel ST
zinc plated, blue passivated
Pin Stainless Steel AISI 303
chemically nickel plated
Knob Plastic (Polyamide PA)
  • black, matt
  • not removable

Information

Indexing plungers GN 607.3 have been developed for installation in thin walled equipment.
It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607 .
Indexing plungers with rest position are used for such applications where the plunger pin has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Accessory

  • Double ring spanner GN 607.9 -SW14-SW16 (assembling aid)

Technical information

Indexing plungers for installation in thin walled equipment, with rest position GN 607.3
GN 607.3
Filter
Description d1 Pin -0.02/-0.05 Bore G7 l1 d2 d3 e l2 l3 l4 s A/F 1 A/F 2 Spring load in N ≈
initial
Spring load in N ≈
end
Axial load in N Weight
GN 607.3-6-8,5-ST 6 8.5 25 10 19.5 34 10 6 1 … 5 17 14 9 25 400 39
GN 607.3-6-10,5-ST 6 10.5 25 10 19.5 34 10 6 1 … 5 17 14 9 25 400 39
GN 607.3-8-10-ST 8 10 31 12 22 40 12 7.5 1 … 5 19 16 13 26 500 62
GN 607.3-8-12-ST 8 12 31 12 22 40 12 7.5 1 … 5 19 16 13 26 500 61