GN 611 Spring plungers with bolt / long version


  • RoHS

Description

Specification

Types

  • Type L: standard spring load
  • Type LS: high spring load
Steel
blackened
Bolt
case hardened
Marking of Type LS:
Housing with 2 longitudinal markings

Information

Spring plungers GN 611 are used as ejectors, push-on and push-off operations in the sheet metal industry, as well as cushioners.
The slot on the plunger side is provided for blind hole application. A special screw driver GN 611.5 is available (see table).

Technical information

Accessory

  • Screw drivers GN 611.5 (Code no. see table)
Spring plungers with bolt / long version GN 611
GN 611
Filter
Description d1 w d2 d3 l1 l2 A/F Spring load
in N ≈
initial
Spring load
in N ≈
end
Code no. for
screw driver
Weight
GN 611-M10-8-L M 10 8 4 7.8 35 25 3 6 16 GN 611.5-M10 13
GN 611-M12-10-L M 12 10 5.5 9.5 43 35 4 4 18 GN 611.5-M12 22
GN 611-M16-10-L M 16 10 8 13.4 48 35 6 7 24 GN 611.5-M16 42
GN 611-M16-15-L M 16 15 8 13.4 58 35 6 9 33 GN 611.5-M16 54
GN 611-M16-20-L M 16 20 8 13.4 58 35 6 4 23 GN 611.5-M16 66
GN 611-M16-25-L M 16 25 8 13.4 98 35 6 13 41 GN 611.5-M16 78
GN 611-M16-30-L M 16 30 8 13.4 98 35 6 13 47 GN 611.5-M16 80
GN 611-M16-40-L M 16 40 8 13.4 148 35 6 13 63 GN 611.5-M16 123
GN 611-M16-50-L M 16 50 8 13.4 148 35 6 7 43 GN 611.5-M16 127
GN 611-M12-10-LS M 12 10 5.5 9.5 43 35 4 7 46 GN 611.5-M12 23
GN 611-M16-10-LS M 16 10 8 13.4 48 35 6 10 43 GN 611.5-M16 42
GN 611-M16-15-LS M 16 15 8 13.4 58 35 6 10 57 GN 611.5-M16 50
GN 611-M16-20-LS M 16 20 8 13.4 83 35 6 18 72 GN 611.5-M16 71
GN 611-M16-25-LS M 16 25 8 13.4 98 35 6 20 70 GN 611.5-M16 78
GN 611-M16-30-LS M 16 30 8 13.4 98 35 6 20 80 GN 611.5-M16 83
GN 611-M16-40-LS M 16 40 8 13.4 148 35 6 21 113 GN 611.5-M16 123
GN 611-M16-50-LS M 16 50 8 13.4 148 35 6 13 75 GN 611.5-M16 120