GN 614 Spring plunger Stainless Steel / Brass / Plastic, Press on type, with ball


Description

Specification

Housing and Ball Stainless Steel NI

  • AISI 305 / 420C
  • Housing sheet-metal
  • Ball hardened

Housing Brass MS

  • turned
  • Ball Stainless Steel AISI 420C, hardened

Housing Plastic (Polyacetal POM) KU

  • temperature resistant up to 50 °C
  • Ball Stainless Steel AISI 420C, hardened

Housing and Ball Plastic (Polyacetal POM) KD

temperature resistant up to 50 °C
Spring
Stainless Steel AISI 631

Information

Spring plungers GN 614 are used as detents as well as for push-on and push-off applications and ejectors.
A tolerance of H7 for the location hole of d1 is recommended.
Due to different production methods, the dimensions l2 and l3 are different.

Technical information

GN 614-NI Stainless Steel
GN 614-NI
Filter
Description d1 +0.1 d2 d3 l1 l2 w Spring load
in N ≈
initial
Spring load
in N ≈
end
Weight
GN 614-3-NI 3 2.4 3.5 4 0.75 0.7 1.8 3.5 1
GN 614-4-NI 4 3 4.6 5 0.9 1 2.5 6 1
GN 614-5-NI 5 4 5.6 6 0.9 1.4 3 6.5 1
GN 614-6-NI 6 5 6.5 7 1 1.8 5.5 11.5 1
GN 614-8-NI 8 6.5 8.5 9 1.1 2.4 7 12.5 2
GN 614-10-NI 10 8.5 11 13 1.5 3.3 8.5 18.5 5
GN 614-12-NI 12 10 13 16 2.3 4 12 26.5 7
GN 614-MS Housing Brass
GN 614-MS
Filter
Description d1 +0.1 d2 d3 l1 l3 ±0.1 w Spring load
in N ≈
initial
Spring load
in N ≈
end
Weight
GN 614-3-MS 3 2.4 3.5 4 0.6 0.6 1.8 3.5 1
GN 614-4-MS 4 3 4.6 5 1 0.8 2.5 6 1
GN 614-5-MS 5 4 5.6 6 1 1 3 6.5 1
GN 614-6-MS 6 5 6.5 7 1 1.6 5.5 11.5 1
GN 614-8-MS 8 6.5 8.5 9 1 1.9 7 12.5 3
GN 614-KU Housing Plastic (POM)
GN 614-KU
Filter
Description d1 +0.1 d2 d3 l1 l3 ±0.1 w Spring load
in N ≈
initial
Spring load
in N ≈
end
Weight
GN 614-3-KU 3 2 3.5 4 0.6 0.6 1.7 3.6 1
GN 614-4-KU 4 3 4.6 5 1 0.8 2.5 6.5 1
GN 614-5-KU 5 4 5.6 6 1 1 4.5 9 1
GN 614-6-KU 6 5 6.5 7 1 1.6 6.5 13 1
GN 614-8-KU 8 6.5 8.5 9 1 1.9 8 18 2
GN 614-10-KU 10 8 11 13.5 1.5 2.4 12 23 3
GN 614-12-KU 12 10 13 16 1.5 3.3 13 25 6
GN 614-KD Housing and Ball Plastic
GN 614-KD
Filter
Description d1 +0.1 d2 d3 l1 l3 ±0.1 w Spring load
in N ≈
initial
Spring load
in N ≈
end
Weight
GN 614-4-KD 4 3 4.6 5 1 0.8 2.5 6.5 1
GN 614-5-KD 5 4 5.6 6 1 1 4.5 9 1
GN 614-6-KD 6 5 6.5 7 1 1.6 6.5 13 1
GN 614-8-KD 8 6.5 8.5 9 1 1.9 8 18 1
GN 614-10-KD 10 8 11 13.5 1.5 2.4 12 23 1
GN 614-12-KD 12 10 13 16 1.5 3.3 13 25 2