GN 614.1 Holder for spring plungers / Side thrust pins


  • RoHS

Description

Specification

Types

  • Type LKU: Fixing from the left, with spring plunger
  • Type RKU: Fixing from the right, with spring plunger
  • Type BKU: Fixing from both sides, with spring plunger
  • Type L: Fixing from the left, without spring plunger
  • Type R: Fixing from the right, without spring plunger
  • Type B: Fixing from both sides, without spring plunger
Zinc die casting
nickel plated
Spring plungers GN 614-KU 
Housing
Plastic (Polyacetal POM)
temperature resistant up to 50 °C
Ball Stainless Steel AISI 420C, hardened

Information

Holder for spring plungers / Side thrust pins GN 614.1 are used for arresting and as press-on or press-off elements. The easy attachment using one or two countersunk screws also allows its use where a location borehole with the tolerance field H7 for the spring plunger would not be possible from its size and manufacturability.
Side thrust pins GN 614.1 consist of a holder for spring plungers and a Stainless Steel-Spring plungerGN 614 of type KU.
For types R, L and B, only a „empty“ holder for spring plungers (without spring plungers) are supplied which can then be used together with all other design variants of GN 614-6 and GN 614-8 of the types KD, MS and NI.

Technical information

Holder for spring plungers / Side thrust pins  GN 614.1
GN 614.1
Filter
Description d1 d2 d3 d4 -0.05 b h1 ±0.05 h2 l1 ±0.05 l2 w -0.1 Spring load
in N ≈
initial
Spring load
in N ≈
end
Weight
GN 614.1-6-LKU 6 5 3.2 | M 3 3 8.5 4.25 3.2 7.5 3 1.6 6.5 13 4
GN 614.1-8-LKU 8 6.5 4.3 | M 4 4 10.5 5.25 4.2 9.5 4 1.9 8 18 7
GN 614.1-6-RKU 6 5 3.2 | M 3 3 8.5 4.25 3.2 7.5 3 1.6 6.5 13 4
GN 614.1-8-RKU 8 6.5 4.3 | M 4 4 10.5 5.25 4.2 9.5 4 1.9 8 18 7
GN 614.1-6-BKU 6 5 3.2 | M 3 3 8.5 4.25 3.2 7.5 3 1.6 6.5 13 5
GN 614.1-8-BKU 8 6.5 4.3 | M 4 4 10.5 5.25 4.2 9.5 4 1.9 8 18 7
GN 614.1-6-L 6 - 3.2 | M 3 3 8.5 4.25 3.2 7.5 3 - - - 3
GN 614.1-8-L 8 - 4.3 | M 4 4 10.5 5.25 4.2 9.5 4 - - - 5
GN 614.1-6-R 6 - 3.2 | M 3 3 8.5 4.25 3.2 7.5 3 - - - 4
GN 614.1-8-R 8 - 4.3 | M 4 4 10.5 5.25 4.2 9.5 4 - - - 5
GN 614.1-6-B 6 - 3.2 | M 3 3 8.5 4.25 3.2 7.5 3 - - - 4
GN 614.1-8-B 8 - 4.3 | M 4 4 10.5 5.25 4.2 9.5 4 - - - 8