GN 616.1 Spring plungers Steel / Stainless Steel, with sealed bolt


Description

Specification

Types

  • Type S: Steel, with standard spring load
  • Type SS: Steel, with high spring load
  • Type SN: Stainless Steel, with standard spring load

Type S / SS

  • Housing Steel, blackened
  • Bolt steel, hardened

Type SN

  • Housing Stainless Steel AISI 303
  • Bolt Stainless Steel AISI 303
Spring
Stainless Steel AISI 303
Sealing ring
Rubber NBR (Perbunan)
Identification of type SS:
Housing with 2 longitudinal markings

Information

GN 616.1 Stainless Steel-Spring plungers are used for locking as well as for pressure and hold-off functions. Entry of liquids and dirt is prevented by the seal.
The slit on the plunger side is used for screwing into pocket holes. For this, a special screwdriver is available as GN 616.5-M... (see table).

Technical information

Accessory

  • Screw drivers GN 616.5 (code no. see table)
GN 616.1-S/SS Steel
GN 616.1-S/SS
Filter
Description d1 d2 l A/F w Spring load
in N ≈
initial
Spring load
in N ≈
end
Code no. for
screw driver
Weight
GN 616.1-M8-S M 8 3.8 26 2.5 3 9 24 GN 615.5-M10 7
GN 616.1-M10-S M 10 4 28 3 3.5 15 30 GN 615.5-M10 11
GN 616.1-M12-S M 12 6 35 4 4 24 50 GN 615.5-M12 20
GN 616.1-M16-S M 16 7.5 40 5 5 36 58 GN 615.5-M16 44
GN 616.1-M8-SS M 8 3.8 26 2.5 3 17 39 GN 615.5-M10 7
GN 616.1-M10-SS M 10 4 28 3 3.5 22 43 GN 615.5-M10 12
GN 616.1-M12-SS M 12 6 35 4 4 40 80 GN 615.5-M12 20
GN 616.1-M16-SS M 16 7.5 40 5 5 44 113 GN 615.5-M16 44
GN 616.1-SN Stainless Steel
GN 616.1-SN
Filter
Description d1 d2 l A/F w Spring load
in N ≈
initial
Spring load
in N ≈
end
Code no. for
screw driver
Weight
GN 616.1-M8-SN M 8 3.8 26 2.5 3 9 24 GN 615.5-M10 7
GN 616.1-M10-SN M 10 4 28 3 3.5 15 30 GN 615.5-M10 12
GN 616.1-M12-SN M 12 6 35 4 4 24 50 GN 615.5-M12 20
GN 616.1-M16-SN M 16 7.5 40 5 5 36 58 GN 615.5-M16 44