EBR-CH
EBR-CH
Handle with safety locking device
For retractable sliding doors, technopolymer
For retractable sliding doors, technopolymer

78711-R,20
78710-R,10
78712-R,50
orGN 300-30-B5-SW;60
GN 612-5-M12x1,5-A;40
DIN 172-B10,5-20-A;50
ISO 8675-M8x1-04-BT;10
Glass-fibre reinforced polyamide based (PA) technopolymer with security anti-intrusion-profiled slot, grey-black colour, matte finish.
Acetal resin based (POM) technopolymer push button with cylindrical part in red colour.
Technopolymer in Ergostyle colours, glossy finish; supplied with the handle, press-fit assembly, removable by a screwdriver.
Available also as accessories sold separately (see table ECA.).
Pass-through holes for cylindrical-head screws with hexagon socket.
CSN: acetal resin based (POM) technopolymer fold-away key, red colour, stainless steel insert.
Doors with EBR-CH handle can be opened only by authorised people, by inserting the anti-intrusion profiled key into its proper slot.
Closing: press the button so that the red cylindrical part of the button completely enters the handle until a click is heard (key must not be inserted during closing).
When the handle is closed, the key must not be in its slot.
Opening: insert the key (without turning it) and push to make the internal device snap.
Force required to release: approx. 50N.
EBR-CH handle can be assembled with EBR neutral handle.
Tensile stress and impact strength: the values F1, F2, L1 and L2 indicated in the table were obtained during breaking tests carried out with the appropriate dynamometric equipment under the test conditions shown in the figure with ambient temperature.
A ball and spring retention system ensures that the key cannot be lost if it remains inserted in its slot when the is door opened.
To order this version it is necessary to add the suffix -F30 to the code and the description after selecting the desired version.
Your request was sent and will be answered as fast as possible.