GN 516.1 Rotary clamping latches Latch distance A continuously adjustable


  • RoHS
  • IP65

Description

Specification

Types

  • Type DK: Operation with triangular spindle (DK7)
  • Type VK7: Operation with square spindle A/F7
  • Type VK8: Operation with square spindle A/F8
  • Type SCH: Operation with slot
  • Type VDE: Operation with double bit
  • Type RG: Operation with knurled knob GN 7336 
  • Type KG: Operation with wing knob
  • Type HG: Operation with lever
Housing / Locking mechanism
Zinc die casting
Locating ring
plastic coated, black, textured finish
Latch
Zinc die casting
all handles (Type RG / KG / HG)
  • Plastic (Polyamide PA) black, matt
  • Cover cap light grey, matt
Protective cap CR Neoprene©
  • 40 to 50 Shore A
  • black
Protection class: IP 65

Information

The rotary clamping latches GN 516.1 have a closing mechanism which transfers the rotary movement of the operating element (key) into a 90° turn and then into a 6 mm linear stroke.
This mechanism is designed for common applications such as making a tight and vibration-proof interlock in the end position (retaining position) in connection with the protective cap.
A 10 mm adjustment within the latch distances A1 ... A4 can be achieved by the set screw M6. This covers a latch distance from 1 to 41 mm consistently.

Technical Information

Accessory

Technical and Assembly Instructions

1. Latch in starting position.
2. The first 90° turn of the actuator / key moves the latch into the usual locking position.
3. Turning the actuator further by another 90° will lift the latch in linear direction by 6 mm, pulling the door leaf against the frame or the seal and generating a vibration-proof lock.
max. torque: 4.5 Nm
max. axial force: 340 N
max. static load: 340 N
For installation, set a bore diameter in the door as shown in the outline drawing. Once assembled, the rotary clamping latch is pushed through the bore diameter from the front. The hexagonal nut can then be pushed over the latch from the back and bolted in place.
The installation bore diameter in the door leaf is usually generated by punching or laser application in series production.
For small series and steel sheets below 2 mm thickness, the sheet metal punshes GN 123 are the tool of choice.
The installation bore diameter can also be set by drilling / milling as shown in the outline drawings.
Rotary clamping latches Latch distance A continuously adjustable GN 516.1
GN 516.1
Filter
Description Latch distance A in retaining position (clamping position) Latch distance Weight
GN 516.1-DK-A1 A 1 (l = 40.5) 1 ... 11 80
GN 516.1-DK-A2 A 2 (l = 40.5) 11 ... 21 87
GN 516.1-DK-A3 A 3 (l = 56) 21 ... 31 102
GN 516.1-DK-A4 A 4 (l = 56) 31 ... 41 118
GN 516.1-HG-A1 A 1 (l = 40.5) 1 ... 11 110
GN 516.1-HG-A2 A 2 (l = 40.5) 11 ... 21 100
GN 516.1-HG-A3 A 3 (l = 56) 21 ... 31 120
GN 516.1-HG-A4 A 4 (l = 56) 31 ... 41 133
GN 516.1-KG-A1 A 1 (l = 40.5) 1 ... 11 120
GN 516.1-KG-A2 A 2 (l = 40.5) 11 ... 21 120
GN 516.1-KG-A3 A 3 (l = 56) 21 ... 31 140
GN 516.1-KG-A4 A 4 (l = 56) 31 ... 41 129
GN 516.1-RG-A1 A 1 (l = 40.5) 1 ... 11 140
GN 516.1-RG-A2 A 2 (l = 40.5) 11 ... 21 123
GN 516.1-RG-A3 A 3 (l = 56) 21 ... 31 120
GN 516.1-RG-A4 A 4 (l = 56) 31 ... 41 120
GN 516.1-SCH-A1 A 1 (l = 40.5) 1 ... 11 120
GN 516.1-SCH-A2 A 2 (l = 40.5) 11 ... 21 112
GN 516.1-SCH-A3 A 3 (l = 56) 21 ... 31 126
GN 516.1-SCH-A4 A 4 (l = 56) 31 ... 41 125
GN 516.1-VDE-A1 A 1 (l = 40.5) 1 ... 11 120
GN 516.1-VDE-A2 A 2 (l = 40.5) 11 ... 21 90
GN 516.1-VDE-A3 A 3 (l = 56) 21 ... 31 120
GN 516.1-VDE-A4 A 4 (l = 56) 31 ... 41 131
GN 516.1-VK7-A1 A 1 (l = 40.5) 1 ... 11 106
GN 516.1-VK7-A2 A 2 (l = 40.5) 11 ... 21 88
GN 516.1-VK7-A3 A 3 (l = 56) 21 ... 31 103
GN 516.1-VK7-A4 A 4 (l = 56) 31 ... 41 101
GN 516.1-VK8-A1 A 1 (l = 40.5) 1 ... 11 100
GN 516.1-VK8-A2 A 2 (l = 40.5) 11 ... 21 106
GN 516.1-VK8-A3 A 3 (l = 56) 21 ... 31 120
GN 516.1-VK8-A4 A 4 (l = 56) 31 ... 41 117