GN 992.5 Stainless Steel-Insert bushings for round tube and square tube


Description

Specification

Stainless Steel AISI 303

Information

Drive the Stainless Steel-Insert bushings GN 992.5 in by using a soft-head mallet. Their lamellas bridge a production tolerance of the internal diameter or of the internal square of ±0.5 mm, allowing screws to be mounted in tubes.
The dimensions match those of the construction tubes GN 990 , but checking the tolerance position of the tube is recommended.

Technical information

Stainless Steel-Insert bushings for round tube and square tube GN 992.5
GN 992.5
Filter
Description d1 s d2 d3 l1 l2 l3 +0.5 w For tube
GN 990
Weight
GN 992.5-D20-M8 D 20 - M 8 16 29.5 2.5 16 2 D 20 28
GN 992.5-D25-M8 D 25 - M 8 21 29.5 2.5 16 2 D 25 80
GN 992.5-D25-M10 D 25 - M 10 21 29.5 2.5 16 2 D 25 50
GN 992.5-D30-M8 D 30 - M 8 26 29.5 2.5 18 2 D 30 93
GN 992.5-D30-M10 D 30 - M 10 26 29.5 2.5 18 2 D 30 90
GN 992.5-D40-M10 D 40 - M 10 34 33.5 2.5 24 3 D 40 186
GN 992.5-D40-M12 D 40 - M 12 34 33.5 2.5 24 3 D 40 180
GN 992.5-D50-M12 D 50 - M 12 44 37.5 2.5 30 3 D 50 350
GN 992.5-D50-M16 D 50 - M 16 44 37.5 2.5 30 3 D 50 330
GN 992.5-V20-M8 - V 20 M 8 - 29.5 2.5 16 2 V 20 32
GN 992.5-V25-M8 - V 25 M 8 - 29.5 2.5 16 2 V 25 61
GN 992.5-V25-M10 - V 25 M 10 - 29.5 2.5 16 2 V 25 58
GN 992.5-V30-M8 - V 30 M 8 - 29.5 2.5 18 2 V 30 106
GN 992.5-V30-M10 - V 30 M 10 - 29.5 2.5 18 2 V 30 103
GN 992.5-V40-M10 - V 40 M 10 - 33.5 2.5 24 3 V 40 216
GN 992.5-V40-M12 - V 40 M 12 - 33.5 2.5 24 3 V 40 211
GN 992.5-V50-M12 - V 50 M 12 - 37.5 2.5 30 3 V 50 420
GN 992.5-V50-M16 - V 50 M 16 - 37.5 2.5 30 3 V 50 390