DIN 6311 Thrust pads for Grub screws DIN 6332, for Tommy screws DIN 6304 / DIN 6306


  • RoHS

Description

Specification

Type

Type S: with snap ring
Steel
case hardened
Snap ring
Spring steel wire

Information

Thrust pads DIN 6311 are utilized to transmit clamping forces. They lean to uneven and unparallel surfaces and eliminate the transmission of any screw turning movement to the workpiece.

Technical information

Hints for installation

The thrust pad has to be held at an angle allowing the circlip to drop to the bottom of its groove with the split end downwards. The thrust pin is then offered up top the split end of the circlip at the lowest possbile angle and pressed home.

Thrust pads for Grub screws DIN 6332, for Tommy screws DIN 6304 / DIN 6306 DIN 6311
DIN 6311
Filter
Description d1 d2 H12 d3 e ≈ h1 h2 Grub screw DIN 6332 Weight
DIN 6311-12-S 12 4.6 10 2.2 7 2.5 M 6 4
DIN 6311-16-S 16 6.1 12 3 9 4 M 8 9
DIN 6311-20-S 20 8.1 15 3.6 11 5 M 10 | M 12 15
DIN 6311-25-S 25 8.1 18 4.5 13 6 M 10 | M 12 33
DIN 6311-32-S 32 12.1 22 5.3 15 7 M 16 59
DIN 6311-40-S 40 15.6 28 5.6 16 9 M 20 106