GN 506.1 T-Nuts Steel / Stainless Steel, accessory for profile systems, without guide step


Description

Specification

Version in Steel

Steel
zinc plated, blue passivated

Version in Stainless Steel

Stainless steel NI
Ball
Stainless Steel
Spring
Stainless Steel

Information

T-Nuts GN 506.1 can be turned into position, i.e. they can be inserted at any point along the slot.
The spring loaded ball will prevent an unwanted movement of the nut in the slot which can easily occur on a bed with the T-slots in a vertical position.
As an example Nuts GN 506.1 can be used to fit hinges to commercially available extrusion rails.
GN 506.1 Steel
GN 506.1
Filter
Description b d1 d2 e +0.5 h1 h2 m For slot width a Weight
GN 506.1-8-M3 8 -0.1 M 3 3 12 4.25 0.7 4 5 2
GN 506.1-8-M4 8 -0.1 M 4 3 12 4.25 0.7 4 5 2
GN 506.1-8-M5 8 -0.1 M 5 3 12 4.25 0.7 4 5 2
GN 506.1-10-M3 10 +0.3 M 3 4 17.5 6.25 1.15 5 6 5
GN 506.1-10-M4 10 +0.3 M 4 4 17.5 6.25 1.15 5 6 5
GN 506.1-10-M5 10 +0.3 M 5 4 17.5 6.25 1.15 5 6 5
GN 506.1-10-M6 10 +0.3 M 6 4 17.5 6.25 1.15 5 6 4
GN 506.1-14-M4 14 -0.2 M 4 5 22.5 7.4 1.7 6.8 8 11
GN 506.1-14-M5 14 -0.2 M 5 5 22.5 7.4 1.7 6.8 8 11
GN 506.1-14-M6 14 -0.2 M 6 5 22.5 7.4 1.7 6.8 8 10
GN 506.1-14-M8 14 -0.2 M 8 5 22.5 7.4 1.7 6.8 8 9
GN 506.1-NI Stainless Steel
GN 506.1-NI
Filter
Description b d1 d2 e +0.5 h1 h2 m For slot width a Weight
GN 506.1-14-M4-NI 14 -0.2 M 4 5 22.5 7.4 1.7 6.8 8 11
GN 506.1-14-M5-NI 14 -0.2 M 5 5 22.5 7.4 1.7 6.8 8 11
GN 506.1-14-M6-NI 14 -0.2 M 6 5 22.5 7.4 1.7 6.8 8 10
GN 506.1-14-M8-NI 14 -0.2 M 8 5 22.5 7.4 1.7 6.8 8 9