GN 5862 Load hooks


  • RoHS

Description

Specification

Hook
Steel, German Material No. 1.6540
  • high-tenisle tempered
  • 100% electro magnetic tensile tested to EN 1677
  • plastic coated, pink
Safety catch
Steel, German Material No. 1.6541
  • forged, high-tensile tempered
  • 100 % electro magnetic tensile tested
Bearing case
Steel 1.6541
  • forged, high-tensile tempered
  • 100 % electro magnetic tensile tested
  • zinc plated, blue passivated
Threaded stud
Steel, high-tensile tempered
Finish: Delta Tone

Information

Load hooks GN 5862 rotate running in ball bearings. The freely rotating hook allows the bolts to hold loads in any allowed tensile direction.
The rated load-bearing capacity is shown clearly on the swivel eye bolt. It is valid for the most unfavourable case in term of the types of load listed opposite. Load rings GN 5862 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.

Technical information

Method of mounting
Number11222223 and 43 and 43 and 4
Angles of inclination90°90°0° to 45 °45° to 60°asymm.0° to 45°45° to 60°asymm.
Factor11221.4112.11.51
M 120.63 t0.63 t1.26 t1.26 t0.88 t0.63 t0.63 t1.32 t0.95 t0.63 t
M 161.50 t1.50 t3.00 t3.00 t2.10 t1.50 t1.50 t3.15 t2.25 t1.50 t
M 202.50 t2.50 t5.00 t5.00 t3.50 t2.50 t2.50 t5.25 t3.75 t2.50 t
M 244.00 t4.00 t8.00 t8.00 t5.60 t4.00 t4.00 t8.40 t6.00 t4.00 t
M 306.70 t5.00 t13.40 t10.00 t7.00 t5.00 t5.00 t10.50 t7.50 t5.00 t
M 3610.00 t8.00 t20.00 t16.00 t11.20 t8.00 t8.00 t16.80 t12.00 t8.00 t

Safety instructions

The above load capacity table shows the maximum loads in metric tonnes as factor of the load ring type and at an operating temperature range of –40 °C to +200 °C, with a safety coefficient of 4 taken into account for all values.
The load hooks GN 5862 may be used only if it is bolted with the minimum screw-in depth which depends on the material and if the bolt contact surface is plane and fixed at a right angle to the tap hole.
If permanently mounted in place, the load hooks must rotate freely by 360° and must not rest on edges or other fixture, e.g. crane hooks. The load hooks are not suitable for permanent rotary movement under load exposure.
Operating instructions with more details and specifications are included with every delivery (see www.elesa-ganter.com)

On request

  • other screw lengths l
Load hooks  GN 5862
GN 5862
Filter
Description d1 d2 l e h1 h2 h3 h4 h5 k1 k2 k3 k4 c s Tightening torque
in Nm
Nominal load
in t
Weight
GN 5862-M12-18 M 12 4.8 18 40 129 116 75 41 49 12 52 25 82 18 36 10 0.63 400
GN 5862-M16-24 M 16 7.4 24 46 167 147 97 50 63 16 73 32 105 25 41 30 1.50 820
GN 5862-M20-30 M 20 9.6 30 61 215 187 126 61 78 20 95 42 136 30 55 70 2.50 1200
GN 5862-M24-36 M 24 12.1 36 87 263 227 150 77 96 26 118 52 163 35 70 150 4.00 1600
GN 5862-M30-45 M 30 15.6 45 95 304 267 174 93 119 30 135 57 189 40 85 225 5.00 2400
GN 5862-M36-54 M 36 19 54 100 356 310 208 102 137 36 161 68 227 48 90 410 8.00 3200