GN 706.4 Semi-split set collars Steel / Stainless Steel / Aluminium, with adjustable hand lever


Description

Specification

Version in Steel

Steel ST
Sintered Steel (Distaloy AB)
black oxidised with vapor

Version in Stainless Steel

Stainless Steel (Sintered Steel) NI
AISI 316L

Version in Aluminium

Aluminium AL
ground
Adjustable hand levers
Zinc die casting
plastic coated
black, RAL 9005, textured finish
Screw insert and retaining screw
Stainless Steel AISI 303

Information

Semi-split set collars GN 706.4 can safely and simply be assembled i.e. with high clamping force without damaging the surface of the shaft.
For size d1 = 32 and 36, d3 is a through hole; starting from d1 = 42 d3 is a threaded blind bore.
These set collars not only serve as an end stop, but they can also be used for fixing or triggering other components such as end limit switches.

Technical information

GN 706.4-AL Aluminium
GN 706.4-AL
Filter
Description d1 d2 H10 Recommended
shaft tolerance h11
b ±0.2 d3 d4 l1 l2 s Weight
GN 706.4-32-B14-AL 32 B 14 11 M 4 13 37 30 2.1 100
GN 706.4-36-B15-AL 36 B 15 13 M 5 13 38.5 30 2.1 63
GN 706.4-36-B16-AL 36 B 16 13 M 5 13 38.5 30 2.1 20
GN 706.4-42-B18-AL 42 B 18 15 M 5 13 41 30 3 80
GN 706.4-42-B20-AL 42 B 20 15 M 5 13 41 30 3 60
GN 706.4-48-B22-AL 48 B 22 15 M 5 13 43 45 3 98
GN 706.4-48-B25-AL 48 B 25 15 M 5 13 43 45 3 100
GN 706.4-55-B28-AL 55 B 28 15 M 6 13 45 45 3 116
GN 706.4-55-B30-AL 55 B 30 15 M 6 13 45 45 3 100
GN 706.4-60-B32-AL 60 B 32 15 M 6 13 46.5 45 4 127
GN 706.4-60-B35-AL 60 B 35 15 M 6 13 46.5 45 4 120
GN 706.4-65-B40-AL 65 B 40 15 M 6 13 47.5 45 4 130
GN 706.4-ST Steel
GN 706.4-ST
Filter
Description d1 d2 H10 Recommended
shaft tolerance h11
b ±0.2 d3 d4 l1 l2 s Weight
GN 706.4-32-B14-ST 32 B 14 11 M 4 13 37 30 2.1 70
GN 706.4-36-B15-ST 36 B 15 13 M 5 13 38.5 30 2.1 112
GN 706.4-36-B16-ST 36 B 16 13 M 5 13 38.5 30 2.1 100
GN 706.4-42-B18-ST 42 B 18 15 M 5 13 41 30 3 120
GN 706.4-42-B20-ST 42 B 20 15 M 5 13 41 30 3 145
GN 706.4-48-B22-ST 48 B 22 15 M 5 13 43 45 3 180
GN 706.4-48-B25-ST 48 B 25 15 M 5 13 43 45 3 167
GN 706.4-55-B28-ST 55 B 28 15 M 6 13 45 45 3 200
GN 706.4-55-B30-ST 55 B 30 15 M 6 13 45 45 3 200
GN 706.4-60-B32-ST 60 B 32 15 M 6 13 46.5 45 4 240
GN 706.4-60-B35-ST 60 B 35 15 M 6 13 46.5 45 4 220
GN 706.4-65-B40-ST 65 B 40 15 M 6 13 47.5 45 4 240
GN 706.4-NI Stainless Steel
GN 706.4-NI
Filter
Description d1 d2 H10 Recommended
shaft tolerance h11
b ±0.2 d3 d4 l1 l2 s Weight
GN 706.4-32-B14-NI 32 B 14 11 M 4 13 37 30 2.1 40
GN 706.4-36-B15-NI 36 B 15 13 M 5 13 38.5 30 2.1 73
GN 706.4-36-B16-NI 36 B 16 13 M 5 13 38.5 30 2.1 66
GN 706.4-42-B18-NI 42 B 18 15 M 5 13 41 30 3 120
GN 706.4-42-B20-NI 42 B 20 15 M 5 13 41 30 3 105
GN 706.4-48-B22-NI 48 B 22 15 M 5 13 43 45 3 142
GN 706.4-48-B25-NI 48 B 25 15 M 5 13 43 45 3 150
GN 706.4-55-B28-NI 55 B 28 15 M 6 13 45 45 3 174
GN 706.4-55-B30-NI 55 B 30 15 M 6 13 45 45 3 160
GN 706.4-60-B32-NI 60 B 32 15 M 6 13 46.5 45 4 200
GN 706.4-60-B35-NI 60 B 35 15 M 6 13 46.5 45 4 180
GN 706.4-65-B40-NI 65 B 40 15 M 6 13 46.5 45 4 183