GN 753 Guide rollers


  • RoHS

Description

Specification

Types

  • Type ZL: cylindrical
  • Type KV: convex
  • Type KF: wedge-shaped
  • Type KK: concave
  • Type KR: circular (O-ring)

Identification no.

  • Version 1: with bore
  • Version 2: with threaded stud
Outer ring
Plastic (Polyacetal POM)
Working temperature: 0° ... 40 °C
Inner ring / balls
Steel, blank
Threaded stud
Steel, zinc plated
O-ring rubber
NBR (Perbunan)
70 Shore A

Information

Guide rollers GN 753 are suitable for moving or guiding smaller loads. They are commonly used in drive engineering.
With the radial load bearing capacity given in the table, the guide rollers reach a minimum run time of 1 million revolutions. In general, the guide rollers should not be used under axial load.

Technical information

On request

  • Guide rollers with rivet spigot
Guide rollers  GN 753
GN 753
Filter
Description d1 d2 d3 d4 d5 d6 d7 d8 b r1 r2 r3 Radial load
bearing capacity
in N at max. 300 rpm
Weight
GN 753-19-B5-KR-1 19 B 5 - 8.2 - - 24 3.5 6 - - - 39 4
GN 753-22-B6-KR-1 22 B 6 - 9.5 - - 29 5 7 - - - 156 7
GN 753-26-B6-KR-1 26 B 6 - 9.5 - - 33 5 7 - - - 156 9
GN 753-19-B5-KF-1 19 B 5 - 8.2 - 17 - - 6 - - 0.6 39 2
GN 753-22-B6-KF-1 22 B 6 - 9.5 - 19 - - 7 - - 0.6 156 2
GN 753-26-B6-KF-1 26 B 6 - 9.5 - 23 - - 7 - - 0.6 156 2
GN 753-19-B5-KV-1 19 B 5 - 8.2 - - - - 6 5 - - 49 2
GN 753-22-B6-KV-1 22 B 6 - 9.5 - - - - 7 5 - - 196 3
GN 753-26-B6-KV-1 26 B 6 - 9.5 - - - - 7 5 - - 196 5
GN 753-19-B5-KK-1 19 B 5 - 8.2 17 - - - 6 - 1.75 - 39 3
GN 753-22-B6-KK-1 22 B 6 - 9.5 19.2 - - - 7 - 2.5 - 156 5
GN 753-26-B6-KK-1 26 B 6 - 9.5 23.2 - - - 7 - 2.5 - 156 7
GN 753-19-B5-ZL-1 19 B 5 - 8.2 - - - - 6 - - - 49 3
GN 753-19-B6-ZL-1 19 B 6 - 8.2 - - - - 7 - - - 49 3
GN 753-22-B6-ZL-1 22 B 6 - 9.5 - - - - 7 - - - 196 5
GN 753-22-B8-ZL-1 22 B 8 - 9.5 - - - - 7 - - - 196 6
GN 753-26-B6-ZL-1 26 B 6 - 9.5 - - - - 7 - - - 196 7
GN 753-26-B10-ZL-1 26 B 10 - 9.5 - - - - 7 - - - 196 8
GN 753-19-M6-KR-2 19 - M 6 8.2 - - 24 3.5 6 - - - 39 7
GN 753-22-M6-KR-2 22 - M 6 9.5 - - 29 5 7 - - - 156 10
GN 753-26-M6-KR-2 26 - M 6 9.5 - - 33 5 7 - - - 156 12
GN 753-19-M6-KF-2 19 - M 6 8.2 - 17 - - 6 - - 0.6 39 6
GN 753-22-M6-KF-2 22 - M 6 9.5 - 19 - - 7 - - 0.6 156 8
GN 753-26-M6-KF-2 26 - M 6 9.5 - 23 - - 7 - - 0.6 156 10
GN 753-19-M6-KV-2 19 - M 6 8.2 - - - - 6 5 - - 49 6
GN 753-22-M6-KV-2 22 - M 6 9.5 - - - - 7 5 - - 196 8
GN 753-26-M6-KV-2 26 - M 6 9.5 - - - - 7 5 - - 196 10
GN 753-19-M6-KK-2 19 - M 6 8.2 17 - - - 6 - 1.75 - 39 6
GN 753-22-M6-KK-2 22 - M 6 9.5 19.2 - - - 7 - 2.5 - 156 8
GN 753-26-M6-KK-2 26 - M 6 9.5 23.2 - - - 7 - 2.5 - 156 9
GN 753-19-M6-ZL-2 19 - M 6 8.2 - - - - 6 - - - 49 6
GN 753-22-M6-ZL-2 22 - M 6 9.5 - - - - 7 - - - 196 9
GN 753-26-M6-ZL-2 26 - M 6 9.5 - - - - 7 - - - 196 10