VDN.FP+I+ST Safety solid handwheels Duroplast


  • RoHS
  • PF
  • g11020

Description

Main specifications

Material

High-strength, reinforced phenolic based (PF) Duroplast, black colour, glossy finish.

Ring

Matte anodised aluminium.
(ELESA Original design - Reg. U.S. Pat. & TM Off.)

Standard execution

Safety coupling bushing with "Pull-coupling" assembly GN 000.5 hardened steel with ground sliding surfaces, reamed assembly hole and keyway in compliance with DIN 6885/2 tolerance P9.
Revolving handle I.301+x in Duroplast.

Other executions

Special executions on request

These handwheels can be supplied with "Push-coupling". By inserting the bushing the other way round, the handwheel operates opposite to the standard way.

Instructions of use

Instructions of use

Safety handwheels are designed in accordance with accident prevention rules: in case of push or accidental pressure when the machine is operating, the handwheel is disengaged and is in the rest position. Only by "Pulling" the handwheel parallel to the axis can the shaft operate: the two toothed elements inside the bushing fit into each other in order to couple the handwheel to the shaft. The handwheel returns automatically to its rest position when it is released after the operation.

General information

Ergonomy

The rim with internal rear scallops makes the grip and the manoeuvre of the handwheel easier.
Safety solid handwheels Duroplast VDN.FP+I+ST
VDN.FP+I+ST
Filter
Code Description D d2 H7 L B d3 d4 max d6 l1 l2 ±0.2 l3 H m R wmin t b Weight
73728 VDN.125 FP+I+ST12 125 12 58 28 29 17 25 -0.05 42 18 12 65 M8 50 4 13.1 4 465
73738 VDN.150 FP+I+ST14 150 14 67 30 33 21 29 -0.05 48 20 14 65 M8 62 4 15.3 5 650
73748 VDN.175 FP+I+ST14 175 14 69 32 33 21 29 -0.05 48 20 14 80 M10 72.5 4 15.3 5 810
73758 VDN.200 FP+I+ST18 200 18 72 32 39 26 35 -0.05 50 24 13 90 M10 82 4 19.7 6 1220
73778 VDN.250 FP+I+ST22 249 22 82 36 46 30 41 -0.05 54 28 13 90 M10 106 4 23.7 6 1670