GN 131.2 Linear actuator connectors for linear actuators Ø18, for two-way axis system


Description

Specification

Identification No.

No. 2: with 2 Stainless Steel-Clamping screws DIN 912

Version in Aluminium

plastic coated
black, RAL 9005, textured finish SW

Version in Stainless Steel AISI CF-8 NI

  • matt shot-blasted
Clamping bores mechanically machined
Slide bushing
Polyamide
Socket cap screw DIN 912
Stainless Steel AISI 304
Hexagon nuts DIN 985
Stainless Steel AISI 304

Information

GN 131.2 linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screws on the guide bores d1 / d2 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by adjustable clamping levers  GN 911.3  (see table of dimensions).

Accessory

  • Clamping kits GN 911  / GN 911.3 

Technical information

GN 131.2 Aluminium
GN 131.2
Filter
Description d1 Bore B
without slide bushing
d1 Bore G
with slide bushing
d2 d3 d4 k l m Clamping kits for d3 Weight
GN 131.2-B18-B18-2-SW B 18 - B 18 M 6 M 3 25 64 20 GN 911-M6-22 62
GN 131.2-G18-G18-2-SW - G 18 G 18 M 6 M 3 25 64 20 GN 911-M6-22 62
GN 131.2-NI Stainless Steel
GN 131.2-NI
Filter
Description d1 Bore G
with slide bushing
d2 d3 d4 k l m Clamping kits for d3 Weight
GN 131.2-G18-G18-2-NI G 18 G 18 M 6 M 3 25 64 20 GN 911.3-M6-22 148