GN 134.1 Linear actuator connectors Aluminium, same bore dimensions d1 / s1 and d2 / s2


  • RoHS

Description

Specification

Identification No.

No. 2: with 4 Stainless Steel-Clamping screws DIN 912
Aluminium
plastic coated
black, RAL 9005, textured finish SW
Clamping bores not machined
Fastening elements / Transfer elements
  • Socket cap screws DIN 912
  • Hexagon nuts DIN 985
  • Centering bushings, follower
Stainless Steel AISI 304

Information

GN 134.1 linear actuator connectors are normally supplied mounted only in connection with a square linear actuator and for function control.
The fixing bores for the follower are always located in the lid of the bore d1 and/or the square s1. Centering bushings in the through-hole eliminate the axial clearance. The width of the s1 square is dimensionally aligned with the play of the square linear actuators.
The square s2 of the linear actuator connector is supplied not machined in the standard design.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911  (article code see table of dimensions).

Accessory

On request

  • Linear actuator connectors with little play
  • other bore and square combinations
  • GN 134.2
  •  linear actuator connectors for double systems

Technical information

Linear actuator connectors Aluminium, same bore dimensions d1 / s1 and d2 / s2 GN 134.1
GN 134.1
Filter
Description d1 s1 d2 s2 d3 d4 k1 k2 l1 l2 l3 m Clamping kits for d4 Weight
GN 134.1-B30-B30-2-SW B 30 - B 30 - M 4 M 8 50 50 79.5 68 68 33.5 GN 911-M8-32 326
GN 134.1-B40-B40-2-SW B 40 - B 40 - M 5 M 10 76 76 125 98 98 55 GN 911-M10-55 885
GN 134.1-B50-B50-2-SW B 50 - B 50 - M 6 M 10 76 76 125 98 98 55 GN 911-M10-55 975
GN 134.1-B30-V30-2-SW B 30 - - V 30 M 4 M 8 50 50 79.5 68 68 33.5 GN 911-M8-32 314
GN 134.1-B40-V40-2-SW B 40 - - V 40 M 5 M 10 76 76 125 98 98 55 GN 911-M10-55 773
GN 134.1-B50-V50-2-SW B 50 - - V 50 M 6 M 10 76 76 125 98 98 55 GN 911-M10-55 891
GN 134.1-V30-V30-2-SW - V 30 - V 30 M 4 M 8 50 50 79.5 68 68 33.5 GN 911-M8-32 300
GN 134.1-V40-V40-2-SW - V 40 - V 40 M 5 M 10 76 76 125 98 98 55 GN 911-M10-55 920
GN 134.1-V50-V50-2-SW - V 50 - V 50 M 6 M 10 76 76 125 98 98 55 GN 911-M10-55 969
GN 134.1-V30-B30-2-SW - V 30 B 30 - M 4 M 8 50 50 79.5 68 68 33.5 GN 911-M8-32 300
GN 134.1-V40-B40-2-SW - V 40 B 40 - M 5 M 10 76 76 125 98 98 55 GN 911-M10-55 946
GN 134.1-V50-B50-2-SW - V 50 B 50 - M 6 M 10 76 76 125 98 98 55 GN 911-M10-55 980