GN 146.1 Flanged linear actuator connectors Aluminium, for linear actuators Ø30, Ø40, Ø50, Ø60


  • RoHS

Description

Specification

Identification No.

No. 2: with Stainless Steel-Clamping screw DIN 912
Aluminium
plastic coated
black, RAL 9005, textured finish SW
Guide bore mechanically machined
Slide bushing
Polyamide
Socket cap screws DIN 912
Stainless Steel AISI 304
Hexagon nuts DIN 985
Stainless Steel AISI 304

Information

GN 146.1 linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit  GN 911  (article code see table of dimensions).

Accessory

Technical information

Flanged linear actuator connectors Aluminium, for linear actuators Ø30, Ø40, Ø50, Ø60 GN 146.1
GN 146.1
Filter
Description d1 Bore B
without slide bushing
d1 Bore G
with slide bushing
d2 d3 d4 k l m t x1 x2 y1 y2 Clamping kits for d3 Weight
GN 146.1-B30-2-SW B 30 - 6.5 M 8 M 4 40 62 30 7 52 35 70 53 GN 911-M8-32 154
GN 146.1-B40-2-SW B 40 - 8.5 M 10 M 5 56 83 42 10 78 52 108 82 GN 911-M10-40 430
GN 146.1-B50-2-SW B 50 - 11 M 10 M 6 65 95 50 14 92 62 128 98 GN 911-M10-55 675
GN 146.1-B60-2-SW B 60 - 11 M 10 M 8 80 112 60 14 110 74 154 118 GN 911-M10-55 1130
GN 146.1-G30-2-SW - G 30 6.5 M 8 M 4 40 62 30 7 52 35 70 53 GN 911-M8-32 140
GN 146.1-G40-2-SW - G 40 8.5 M 10 M 5 56 83 42 10 78 52 108 82 GN 911-M10-40 420
GN 146.1-G50-2-SW - G 50 11 M 10 M 6 65 95 50 14 92 62 128 98 GN 911-M10-55 720
GN 146.1-G60-2-SW - G 60 11 M 10 M 8 80 112 60 14 110 74 154 118 GN 911-M10-55 1130