GN 147.1 Linear actuators connectors Aluminum, for square linear actuators


  • RoHS

Description

Specification

Identification no.

No. 2: with 2 Stainless Steel-clamping screws DIN 912
Aluminium
Plastic coated
black, RAL 9005, textured finish SW
Clamping square not machined
Socket cap screws DIN 912
Stainless Steel AISI 304
Hexagon nuts DIN 985
Stainless Steel AISI 304

Information

GN 147.1 linear actuator connectors are normally supplied mounted only in connection with a square linear actuator and for function control.
The square of the linear actuator connector is supplied not machined in the standard design. Together with the tolerance of the tube, this may result in a relatively large play.
This can be adjusted in one direction using the clamping screws. In the other direction (90° to it), a defined minimum play can be achieved only by appropriate machining (special design) of the square linear actuator connector.
The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit  GN 911  (article code see table of dimensions).

Accessory

On Request

  • Linear actuator connectors with little play

Technical Information

GN 147.1
Filter
Description s d1 d2 d3 k l1 l2 m t x1 x2 y1 y2 Clamping kits for d2 Weight
GN 147.1-V30-2-SW V 30 6.5 M 8 M 4 50 53 68 30 7 50 35 75 60 GN 911-M8-45 221
GN 147.1-V40-2-SW V 40 11 M 10 M 5 76 81.5 98 46.5 14 76 50 115 90 GN 911-M10-70 643
GN 147.1-V50-2-SW V 50 11 M 10 M 6 76 81.5 98 46.5 14 76 50 115 90 GN 911-M10-70 700