GN 162.1 Base plate linear actuator connectors Aluminium / Stainless Steel, for linear actuators Ø 18


Description

Specification

Identification no.

No. 2: with Stainless Steel-Clamping Screw DIN 912

Version in Aluminium

Plastic coated
black, RAL 9005, textured finish SW

Version in Stainless Steel AISI CF-8 NI

  • matt shot-blasted
  • Bore only with slide bushing (G18)
Guide bore mechanically machined
Slide bushing
Polyamide
Socket cap screw DIN 912
Stainless Steel AISI 304
Hexagon nuts DIN 985
Stainless Steel AISI 304

Information

GN 162.1 base plate linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit  GN 911  (article code see table of dimensions).

Accessory

  • Clamping kits GN 911  / GN 911.3)

Technical Information

GN 162.1
Filter
Description d1 Bore B
without slide bushing
d1 Bore G
with slide bushing
d2 d3 d4 k t x1 x2 y1 y2 Clamping kits for d2 Weight
GN 162.1-B18-2-SW B 18 - 5.5 M 6 M 3 40 7 50 35 75 60 GN 911-M8-45 75
GN 162.1-G18-2-SW - G 18 5.5 M 6 M 3 40 7 76 50 115 90 GN 911-M10-70 79
GN 162.1-NI
Filter
Description d1 Bore G
with slide bushing
d2 d3 d4 k t x1 x2 y1 y2 Clamping kits for d2 Weight
GN 162.1-G18-2-NI G 18 5.5 M 6 M 3 40 7 76 50 115 90 GN 911-M10-70 190