GN 273.1 Swivel clamp linear actuator connectors for linear actuators Ø18


  • RoHS

Description

Specification

Identification No.

No. 2: with Stainless Steel-Clamping screw DIN 912
Aluminium
plastic coated
black, RAL 9005, textured finish SW
Guide bore mechanically machined
Slide bushing
Polyamide
Socket cap screw DIN 912
Stainless Steel AISI 304
Hexagon nuts DIN 985
Stainless Steel AISI 304

Information

GN 273.1 swivel clamp linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911  (article code see table of dimensions).

Accessory

Technical information

Swivel clamp linear actuator connectors for linear actuators Ø18 GN 273.1
GN 273.1
Filter
Description d1 Bore B
without slide bushing
d1 Bore G
with slide bushing
b d2 d3 d4 d5 k l m s Clamping kits for d3 Weight
GN 273.1-B18-2-SW B 18 - 25 6.5 M 6 M 6 M 3 25 64 29.5 10 GN 911-M6-22 55
GN 273.1-G18-2-SW - G 18 25 6.5 M 6 M 6 M 3 25 64 29.5 10 GN 911-M6-22 53