GN 481 Edge handles


  • RoHS

Description

Specification

Tube extrusion
Aluminium
End caps
Zinc die casting
Tube extrusion / End caps
plastic coated
black, RAL 9005, textured finish SW
Self tapping countersunk screws
DIN 7500-1, type M with Torx®

Information

The tube extrusion for edge handles GN 481 is formed in such a way that two countersunk self tapping screws are used to cut their own counter thread in the extrusion to hold the end caps in position.
If an edge handle for a cabinet of non-standard length is required, a standard extrusion can simply be shortened to fit.

Accessory

Four DIN 7500-1 countersunk screws are included.

On request

Tube extrusion
anodized, natural colour
End caps, plastic coated
silver, textured finish

Mounting information

In order to allign the edge handle with the-edge of the cabinet (tolerance l1 + 2 mm), the end caps should, to start with, only be loosely fitted
The mounting is carried out in two steps as follows:
  • Fit the end caps firmly to the cabinet.
  • Fix the extrusion axially by using the countersunk screws.
Edge handles  GN 481
GN 481
Filter
Description d1 -0.5 l1 +2 a1 a2 d2 h1 h2 -0.1 l2 Weight
GN 481-30-100-SW 30 100 18 9 32 34.5 14.5 106 105
GN 481-30-200-SW 30 200 18 9 32 34.5 14.5 206 150
GN 481-30-300-SW 30 300 18 9 32 34.5 14.5 306 202
GN 481-30-400-SW 30 400 18 9 32 34.5 14.5 406 250
GN 481-30-500-SW 30 500 18 9 32 34.5 14.5 506 300