Specification
- Version B: Without keyway
- Version K: With keyway DIN 6885-1 P9
- Version V: With square DIN 79
- Type M: Cover with indicator point
- Type N: Cover plain
Plastic, polyamid (PA)
Light gray
Plastic, phenolic resin (PF)
Black, shiny finish
Information
The cover of the control hubs GN 750 conceals fastening elements (see installation examples) as well as protruding and receding shafts. It is also suitable for printing characters and symbols.
During installation, the cover is pressed in by hand. For removal, it can be lifted off at the recess using a screwdriver.
Assembly Examples
Control levers GN 750 with spring plunger GN 614 , mounted with a cross pin. The arrangement of the spring plunger facilitates simple installation; if desired the detent cone can be drilled out from the shifting hub before the plunger is fitted. The recessed shaft and the bore for the spring plunger are hidden by the cover.
Control levers GN 750 with hub keyway / parallel key, mounted axially by countersunk washer GN 184 , with an annular groove for attaching pins to limit the angle of rotation.
