Specification
Types
- Type B: With mounting tab and key ring
- Type C: With 2 mounting tabs
Retaining cable
Stainless steel AISI 316
Plastic coated (PVC)
Transparent TR
Mounting tab
Stainless steel AISI 316
Plain
Key ring
Stainless steel AISI 316 Ti
Plain, tumbled
Press sleeves
Stainless steel AISI 316
Information
Stainless steel retaining cables GN 111.8 are available in 3 different types and can therefore be used in a wide range of applications, e.g. for loss protection or as connecting and mounting cables.
Due to the selection of materials, the stainless steel retaining cables are suitable for use in highly corrosive environments.
On delivery the key rings are already mounted on the stainless steel retaining cable.
With type A, both rings have the same diameter d1.
For all types the loops are reversed laterally and attached parallel to each other, which is not entirely considered in the simplified drawing.
The load values given in the table are non-binding guide values and rule out any liability.
Type A and type B are ideal suitable for ball lock pins and locking pins with axial lock.
* - GN 113.11, GN 113.12 for pin Ø 5, Ø 6- GN 113.1, GN 113.3, GN 113.4, GN 113.7, GN 113.8, GN 113.9, GN 113.10, GN 113.30, GN 214.2, GN 214.3, GN 214.6 for pin Ø 5, Ø 6, Ø 8- GN 113.5, GN 113.6, GN 114.2, GN 114.3, GN 114.6, GN 124.1, GN 124.2 for all pin diameters
** - GN 113.11, GN 113.12, GN 314 for pin Ø 8, Ø 10, Ø 12- GN 113.1, GN 113.3, GN 113.4, GN 113.7, GN 113.8, GN 113.9, GN 113.10, GN 113.30, GN 214.2, GN 214.3, GN 214.6 for pin Ø 10, Ø 12, Ø 16, Ø 20, Ø 25
*** - GN 113.11, GN 113.12, GN 314 for pin Ø 16, Ø 20, Ø 25
