Close
GN 306-KS
GN 306
Adjustable Hand Levers
Zinc Die Casting, Insert Steel / Stainless Steel, with External Thread, with Special Tip
Insert steel, conical end hardened
Zinc Die Casting, Insert Steel / Stainless Steel, with External Thread, with Special Tip
Insert steel, conical end hardened
SpecificationInformationOn requestTechnical information
Specification
Insert Steel
Types
- Type MS: Brass tip
- Type KU: Plastic tip
- Type DZ: Hardened tip
- Type ZK: Spherical end
- Type KD: Spherical end with thrust pad POM
- Type RD: Spherical end with thrust pad NBR
- Type KS: Conical end hardened
Handle
Zinc die casting
Powder coated
- Black, RAL 9005, textured finish B
- Orange, RAL 2004, textured finish O
- Only type MS / KU / DZ / ZK / KD
- Red, RAL 3000, textured finish R
- Silver, RAL 9006, textured finish S
- Only type MS / KU / DZ / ZK / KD
Insert / Retaining screw
Steel, blackened
- Property class 5.8
- Conical tip hardened for type KS
Tip
- Brass for type MS
- Plastic, Polyacetal (POM) for type KU
- Steel, hardened (oval point) for type DZ
Thrust pad
- Plastic, Polyacetal (POM) for type KD
- Operating temperature up to 80 °C
- Black, matte finish
- Acrylonitrile butadiene rubber (NBR) for type RD
- Hardness 85 ±5 Shore A
- Operating temperature up to 120 °C
- Black, matte finish
- Disk stainless steel AISI 304
Insert Stainless Steel
Types
- Type MSN: Brass tip
- Type KUN: Plastic tip
- Type ZKN: Spherical end
- Type KDN: Spherical end with thrust pad POM
- Type NDN: Spherical end with thrust pad stainless steel
- Type RDN: Spherical end with thrust pad NBR
Handle
Zinc die casting
Powder coated
- Black, RAL 9005, textured finish B
- Red, RAL 3000, textured finish R
Insert / Retaining screw
Stainless steel AISI 303
Tip
- Brass for type MSN
- Plastic, Polyacetal (POM) for type KUN
Thrust pad
- Plastic, Polyacetal (POM) for type KD
- Operating temperature up to 80 °C
- Black, matte finish
- Stainless steel AISI 303 for type NDN
- O-ring
- Fluorine rubber (FKM)
- Operating temperature up to 200 °C
- Acrylonitrile butadiene rubber (NBR) for type RDN
- Hardness 85 ±5 Shore A
- Operating temperature up to 120 °C
- Black, matte finish
- Disk stainless steel AISI 304
Information
Adjustable hand levers GN 306 are used in devices for tool-free clamping, pressing or fixation. To achieve a convenient clamping position, the handle can be lifted by the dimension h4 and then swiveled. Upon releasing, it snaps back into the serration under spring pressure.
The tip of types MS / KU / MSN / KUN helps prevent pressure marks or damage to the clamped workpiece. The conical end of type KS allows for simple positioning or centering in a corresponding mounting hole. The rounded tip of type DZ provides a pointed contact and angular compensation.
The thrust pad of types KD / RD / KDN / RDN enlarges the contact surface to protect surfaces from damage. In combination with the spherical end, the thrust pad forms a ball joint that adapts to uneven clamping surfaces. It also prevents the rotational movement from being transferred to the clamping surface during clamping.
The rubber coating of types RD / RDN also prevents slipping, provides a dampening effect and reduces noise. In this version, the disk is encased in vulcanized rubber to ensure high load capacity and dimensional stability.
The thrust pads are removable and are supplied unattached.
On request
- Handle in other colors
- Flat handle GN 302 (Insert Steel)
- Handle in stainless steel (Insert Stainless Steel)
Technical information
/RedirectToProductView?storeId=10158&langId=-1&catalogId=11551&getCategoryPadre=true&=
Ask and we will answer as fast as possible
*Mandatory field
Your request was sent and will be answered as fast as possible.
Error
These products could be interesting for you as well