Specification
Types
- Type AVF: Forked clamping arm, with two flanged washers
- Type CVF: Forked clamping arm, with two flanged washers and clamping screw GN 708.1
- Type EVF: Solid bar version with clasp for welding
Tensioning mechanism
Steel
- Case hardening steel C10, zinc plated, blue passivated
- Bearing pins tempered
- Bearing rivets case-hardened
- Moving parts lubricated with special grease
Handle
Plastic
Red, oil resistant
Clasp for type EVF
Steel zinc plated, blue passivated
Flanged washers GN 898 for type AVF / CVF
Steel zinc plated, blue passivated
Clamping screw GN 708.1 for type CVF
- Steel, zinc plated, blue passivated
- Thrust pad
- Hardness 85 Shore A ≈
- Vulcanized
- Black
- Type A (flat pressure area)
Information
Toggle clamps GN 812.1 work according to the toggle principle. Lever and clamping bar move in the same direction. In the clamped position the opera ting lever is in its vertical position. The two mounting surfaces oriented at 90° to each other allow for space-saving installation next to the clamping point.
Toggle clamps with forked clamping arm of type AVF can accommodate an application-specific screw via the flanged washers. A clamping screw with rubber thrust pad is also included with type CVF. Toggle clamps in type EVF can be adapted to special requirements by welding with the supplied clasp.
