HCK-ST - HCK-STL Column level indicators with temperature sensor


Description

Main specifications

Assembly ends

Glass-fibre reinforced polyamide based (PA) technopolymer, black colour.

Support

Aluminium in natural colour.

Graduated contrast screen

White lacquered aluminium. It can be taken out before assembly to allow the insertion of level lines or words.

Bracket with sensors

Watertight glass-fibre reinforced polyamide based (PA) technopolymer, black colour.

Swivelling connector

With built-in cable gland and contact holder. Front or axial output (high or low) ensuring protection against water sprays (protection class IP 65 according to table EN 60529 table).

Standard executions

See configuration table.

General information

Technical data

In laboratory tests carried out for a relatively limited time with the following liquids at a temperature of 23° C: mineral oil type CB68 (according to ISO 3498) for HCK, mineral oil type CB68 (according to ISO 3498) water or water/glycol-based solutions ( 50%) for HCK-GL, the resistance values were much higher than 35 bar.
For use with other fluids and under different pressure and temperature conditions, please contact ELESA Technical Department.
In any case we suggest to verify the suitability of the product under the actual working conditions.

Electrical features

Functioning of the MAX temperature sensor

  • NO: the electrical contact closes when the pre-set temperature is reached at 80°C.
  • NC: the electrical contact opens when the pre-set temperature at 80°C is reached.
Electrical featuresMAX temperature sensor
Tension feedAC/DC
Electric contactsNO normally open
NC normally closed
Voltage /
Maximum current
250 Vac - 2 A(resisteve loads)
115 Vac- 3A
24 Vdc - 3 A
12 Vdc - 4 A
Minimum current50 mA
Cable glandPg 7 (for cables in sheath with Ø 6 or 7 mm)
Conductors cross-sectionMax. 1.5 mm2

Functioning of the temperature electrical probe

The working principle of the temperature probe is to measure the variation of resistance of a platinum element: 100 ohm = 0°C, 138.4 ohm = 100°C.
The function between temperature (T) and resistance (R) is approximately linear over a small temperature range: for example, if you assume that it is linear over the 0° to 100°C range, the error at 50°C is 0.4°C.
For precision measurement, it is necessary to linearise the resistance to give an accurate temperature. The most recent definition of the function between resistance and temperature is International Temperature Standard 90 (ITS-90). The function between resistance and temperature, obtained in laboratory tests, measuring directly the resistance value on the contacts is shown in the graph. We suggest, anyway, to set the system in order to compensate both heat dissipation and cable resistance.

A 1°C temperature change will cause a 0.384 ohm change in resistance, so even a small error in measurement of the resistance (for example, the resistance of the wires leading to the sensor) can cause a large error in the measurement of the temperature.
Because of the low signal levels, it is important to keep any cables away from electric cables, motors, switchgear and other devices that may emit magnetic or electrical noise. Using screened cable, with the screen grounded at one end, may help to reduce interference.
When using long cables, it is necessary to check that the measuring equipment is able to handle the cable resistance.
Electrical featuresTemperature probe
Tension feedAC/DC
Maximum current1mA
Cable glandPg 7 (for cables in sheath with Ø 6 or 7 mm)
Conductors cross-sectionMax. 1.5 mm2
Do not mount this indicator in proximity to magnetic fields.

Other executions

Special executions on request

  • Column level window in transparent methylmatacrylate (PMMA) for max 70°C use.
  • Polyamide based technopolymer float (from HCK.127) red colour.
  • NBR float (from HCK.176) black colour with AISI 316 stainless steel spiral for special executions, viscous liquids, high temperatures.
  • Indicators with level visibility (e) up to 1429 mm and fixing holes with hole centre distance (f) up to 1500 mm.
  • Packing rings in special material depending on the customer's needs.
  • Special screw with nickel-plated brass tap to be fitted to the lower assembly end for any maintenance operation requiring the indicator exclusion.

Instructions of use

Connector assembly instructions

  1. Remove the connector from the indicator by unscrewing the set screw placed on the connector, take the contact holders out and loosen the cable gland.
  2. See Fig.3 to proceed with the wiring according to the chosen product.
  3. Assemble by pressing the contact holder into the connector in the required position.
  4. Screw the connectors to the indicator and then tighten the cable glands.
HCK-ST with MAX temperature electrical sensor
HCK-ST with MAX temperature electrical sensor
HCK-ST with MAX temperature electrical sensor
HCK-ST
Filter
Code Description f L e d'-0.2 f' C#
[Nm]
Weight
113003 HCK.127-ZN-M12-NBR-PC-P-ST80-NC 127 164 56 12.5 127±0.5 12 228
113005 HCK.127-ZN-M12-NBR-PC-P-ST80-NO 127 164 56 12.5 127±0.5 12 228
114003 HCK.176-ZN-M12-NBR-PC-P-ST80-NC 176 213 105 12.5 176±0.5 12 258
114005 HCK.176-ZN-M12-NBR-PC-P-ST80-NO 176 213 105 12.5 176±0.5 12 258
116103 HCK.254-ZN-M12-NBR-PC-P-ST80-NC 254 291 183 12.5 254±0.5 12 305
116105 HCK.254-ZN-M12-NBR-PC-P-ST80-NO 254 291 183 12.5 254±0.5 12 305
117003 HCK.381-ZN-M12-NBR-PC-P-ST80-NC 381 418 310 12.5 381±0.5 12 384
117005 HCK.381-ZN-M12-NBR-PC-P-ST80-NO 381 418 310 12.5 381±0.5 12 384
117903 HCK.508-ZN-M12-NBR-PC-P-ST80-NC 508 545 437 12.5 508±0.5 12 462
117905 HCK.508-ZN-M12-NBR-PC-P-ST80-NO 508 545 437 12.5 508±0.5 12 462
113133 HCK.127-ZN-M12-FKM-PC-P-ST80-NC 127 164 56 12.5 127±0.5 12 228
113135 HCK.127-ZN-M12-FKM-PC-P-ST80-NO 127 164 56 12.5 127±0.5 12 228
114133 HCK.176-ZN-M12-FKM-PC-P-ST80-NC 176 213 105 12.5 176±0.5 12 258
114135 HCK.176-ZN-M12-FKM-PC-P-ST80-NO 176 213 105 12.5 176±0.5 12 258
116233 HCK.254-ZN-M12-FKM-PC-P-ST80-NC 254 291 183 12.5 254±0.5 12 305
116235 HCK.254-ZN-M12-FKM-PC-P-ST80-NO 254 291 183 12.5 254±0.5 12 305
117143 HCK.381-ZN-M12-FKM-PC-P-ST80-NC 381 418 310 12.5 381±0.5 12 384
117145 HCK.381-ZN-M12-FKM-PC-P-ST80-NO 381 418 310 12.5 381±0.5 12 384
118053 HCK.508-ZN-M12-FKM-PC-P-ST80-NC 508 545 437 12.5 508±0.5 12 462
118055 HCK.508-ZN-M12-FKM-PC-P-ST80-NO 508 545 437 12.5 508±0.5 12 462
113045 HCK.127-ZN-M12-NBR-GL-P-ST80-NC 127 164 56 12.5 127±0.5 12 228
113047 HCK.127-ZN-M12-NBR-GL-P-ST80-NO 127 164 56 12.5 127±0.5 12 228
114045 HCK.176-ZN-M12-NBR-GL-P-ST80-NC 176 213 105 12.5 176±0.5 12 258
114047 HCK.176-ZN-M12-NBR-GL-P-ST80-NO 176 213 105 12.5 176±0.5 12 258
116145 HCK.254-ZN-M12-NBR-GL-P-ST80-NC 254 291 183 12.5 254±0.5 12 305
116147 HCK.254-ZN-M12-NBR-GL-P-ST80-NO 254 291 183 12.5 254±0.5 12 305
117045 HCK.381-ZN-M12-NBR-GL-P-ST80-NC 381 418 310 12.5 381±0.5 12 384
117047 HCK.381-ZN-M12-NBR-GL-P-ST80-NO 381 418 310 12.5 381±0.5 12 384
117945 HCK.508-ZN-M12-NBR-GL-P-ST80-NC 508 545 437 12.5 508±0.5 12 462
117947 HCK.508-ZN-M12-NBR-GL-P-ST80-NO 508 545 437 12.5 508±0.5 12 462
113177 HCK.127-ZN-M12-FKM-GL-P-ST80-NC 127 164 56 12.5 127±0.5 12 228
113179 HCK.127-ZN-M12-FKM-GL-P-ST80-NO 127 164 56 12.5 127±0.5 12 228
114177 HCK.176-ZN-M12-FKM-GL-P-ST80-NC 176 213 105 12.5 176±0.5 12 258
114179 HCK.176-ZN-M12-FKM-GL-P-ST80-NO 176 213 105 12.5 176±0.5 12 258
116277 HCK.254-ZN-M12-FKM-GL-P-ST80-NC 254 291 183 12.5 254±0.5 12 305
116279 HCK.254-ZN-M12-FKM-GL-P-ST80-NO 254 291 183 12.5 254±0.5 12 305
117187 HCK.381-ZN-M12-FKM-GL-P-ST80-NC 381 418 310 12.5 381±0.5 12 384
117189 HCK.381-ZN-M12-FKM-GL-P-ST80-NO 381 418 310 12.5 381±0.5 12 384
118097 HCK.508-ZN-M12-FKM-GL-P-ST80-NC 508 545 437 12.5 508±0.5 12 462
118099 HCK.508-ZN-M12-FKM-GL-P-ST80-NO 508 545 437 12.5 508±0.5 12 462
113003-NP HCK.127-ZN-M12-NBR-PC-NP-ST80-NC 127 164 56 12.5 127±0.5 12 228
113005-NP HCK.127-ZN-M12-NBR-PC-NP-ST80-NO 127 164 56 12.5 127±0.5 12 228
114003-NP HCK.176-ZN-M12-NBR-PC-NP-ST80-NC 176 213 105 12.5 176±0.5 12 258
114005-NP HCK.176-ZN-M12-NBR-PC-NP-ST80-NO 176 213 105 12.5 176±0.5 12 258
116103-NP HCK.254-ZN-M12-NBR-PC-NP-ST80-NC 254 291 183 12.5 254±0.5 12 305
116105-NP HCK.254-ZN-M12-NBR-PC-NP-ST80-NO 254 291 183 12.5 254±0.5 12 305
117003-NP HCK.381-ZN-M12-NBR-PC-NP-ST80-NC 381 418 310 12.5 381±0.5 12 384
117005-NP HCK.381-ZN-M12-NBR-PC-NP-ST80-NO 381 418 310 12.5 381±0.5 12 384
117903-NP HCK.508-ZN-M12-NBR-PC-NP-ST80-NC 508 545 437 12.5 508±0.5 12 462
117905-NP HCK.508-ZN-M12-NBR-PC-NP-ST80-NO 508 545 437 12.5 508±0.5 12 462
113133-NP HCK.127-ZN-M12-FKM-PC-NP-ST80-NC 127 164 56 12.5 127±0.5 12 228
113135-NP HCK.127-ZN-M12-FKM-PC-NP-ST80-NO 127 164 56 12.5 127±0.5 12 228
114133-NP HCK.176-ZN-M12-FKM-PC-NP-ST80-NC 176 213 105 12.5 176±0.5 12 258
114135-NP HCK.176-ZN-M12-FKM-PC-NP-ST80-NO 176 213 105 12.5 176±0.5 12 258
116233-NP HCK.254-ZN-M12-FKM-PC-NP-ST80-NC 254 291 183 12.5 254±0.5 12 305
116235-NP HCK.254-ZN-M12-FKM-PC-NP-ST80-NO 254 291 183 12.5 254±0.5 12 305
117143-NP HCK.381-ZN-M12-FKM-PC-NP-ST80-NC 381 418 310 12.5 381±0.5 12 384
117145-NP HCK.381-ZN-M12-FKM-PC-NP-ST80-NO 381 418 310 12.5 381±0.5 12 384
118053-NP HCK.508-ZN-M12-FKM-PC-NP-ST80-NC 508 545 437 12.5 508±0.5 12 462
118055-NP HCK.508-ZN-M12-FKM-PC-NP-ST80-NO 508 545 437 12.5 508±0.5 12 462
HCK-ST
Filter
Code Description f L e d'-0.2 f' C#
[Nm]
Weight
113303 HCK.127-SST-M12-NBR-PC-P-ST80-NC 127 164 56 12.5 127±0.5 12 228
113305 HCK.127-SST-M12-NBR-PC-P-ST80-NO 127 164 56 12.5 127±0.5 12 228
114273 HCK.176-SST-M12-NBR-PC-P-ST80-NC 176 213 105 12.5 176±0.5 12 258
114275 HCK.176-SST-M12-NBR-PC-P-ST80-NO 176 213 105 12.5 176±0.5 12 258
116383 HCK.254-SST-M12-NBR-PC-P-ST80-NC 254 291 183 12.5 254±0.5 12 305
116385 HCK.254-SST-M12-NBR-PC-P-ST80-NO 254 291 183 12.5 254±0.5 12 305
117293 HCK.381-SST-M12-NBR-PC-P-ST80-NC 381 418 310 12.5 381±0.5 12 384
117295 HCK.381-SST-M12-NBR-PC-P-ST80-NO 381 418 310 12.5 381±0.5 12 384
118203 HCK.508-SST-M12-NBR-PC-P-ST80-NC 508 545 437 12.5 508±0.5 12 462
118205 HCK.508-SST-M12-NBR-PC-P-ST80-NO 508 545 437 12.5 508±0.5 12 462
113435 HCK.127-SST-M12-FKM-PC-P-ST80-NC 127 164 56 12.5 127±0.5 12 228
113437 HCK.127-SST-M12-FKM-PC-P-ST80-NO 127 164 56 12.5 127±0.5 12 228
114413 HCK.176-SST-M12-FKM-PC-P-ST80-NC 176 213 105 12.5 176±0.5 12 258
114415 HCK.176-SST-M12-FKM-PC-P-ST80-NO 176 213 105 12.5 176±0.5 12 258
116523 HCK.254-SST-M12-FKM-PC-P-ST80-NC 254 291 183 12.5 254±0.5 12 305
116525 HCK.254-SST-M12-FKM-PC-P-ST80-NO 254 291 183 12.5 254±0.5 12 305
117433 HCK.381-SST-M12-FKM-PC-P-ST80-NC 381 418 310 12.5 381±0.5 12 384
117435 HCK.381-SST-M12-FKM-PC-P-ST80-NO 381 418 310 12.5 381±0.5 12 384
118343 HCK.508-SST-M12-FKM-PC-P-ST80-NC 508 545 437 12.5 508±0.5 12 462
118345 HCK.508-SST-M12-FKM-PC-P-ST80-NO 508 545 437 12.5 508±0.5 12 462
113347 HCK.127-SST-M12-NBR-GL-P-ST80-NC 127 164 56 12.5 127±0.5 12 228
113349 HCK.127-SST-M12-NBR-GL-P-ST80-NO 127 164 56 12.5 127±0.5 12 228
114317 HCK.176-SST-M12-NBR-GL-P-ST80-NC 176 213 105 12.5 176±0.5 12 258
114319 HCK.176-SST-M12-NBR-GL-P-ST80-NO 176 213 105 12.5 176±0.5 12 258
116427 HCK.254-SST-M12-NBR-GL-P-ST80-NC 254 291 183 12.5 254±0.5 12 305
116429 HCK.254-SST-M12-NBR-GL-P-ST80-NO 254 291 183 12.5 254±0.5 12 305
117337 HCK.381-SST-M12-NBR-GL-P-ST80-NC 381 418 310 12.5 381±0.5 12 384
117339 HCK.381-SST-M12-NBR-GL-P-ST80-NO 381 418 310 12.5 381±0.5 12 384
118247 HCK.508-SST-M12-NBR-GL-P-ST80-NC 508 545 437 12.5 508±0.5 12 462
118249 HCK.508-SST-M12-NBR-GL-P-ST80-NO 508 545 437 12.5 508±0.5 12 462
113477 HCK.127-SST-M12-FKM-GL-P-ST80-NC 127 164 56 12.5 127±0.5 12 228
113479 HCK.127-SST-M12-FKM-GL-P-ST80-NO 127 164 56 12.5 127±0.5 12 228
114455 HCK.176-SST-M12-FKM-GL-P-ST80-NC 176 213 105 12.5 176±0.5 12 258
114457 HCK.176-SST-M12-FKM-GL-P-ST80-NO 176 213 105 12.5 176±0.5 12 258
116565 HCK.254-SST-M12-FKM-GL-P-ST80-NC 254 291 183 12.5 254±0.5 12 305
116567 HCK.254-SST-M12-FKM-GL-P-ST80-NO 254 291 183 12.5 254±0.5 12 305
117475 HCK.381-SST-M12-FKM-GL-P-ST80-NC 381 418 310 12.5 381±0.5 12 384
117477 HCK.381-SST-M12-FKM-GL-P-ST80-NO 381 418 310 12.5 381±0.5 12 384
118385 HCK.508-SST-M12-FKM-GL-P-ST80-NC 508 545 437 12.5 508±0.5 12 462
118387 HCK.508-SST-M12-FKM-GL-P-ST80-NO 508 545 437 12.5 508±0.5 12 462
113303-NP HCK.127-SST-M12-NBR-PC-NP-ST80-NC 127 164 56 12.5 127±0.5 12 228
113305-NP HCK.127-SST-M12-NBR-PC-NP-ST80-NO 127 164 56 12.5 127±0.5 12 228
114273-NP HCK.176-SST-M12-NBR-PC-NP-ST80-NC 176 213 105 12.5 176±0.5 12 258
114275-NP HCK.176-SST-M12-NBR-PC-NP-ST80-NO 176 213 105 12.5 176±0.5 12 258
116383-NP HCK.254-SST-M12-NBR-PC-NP-ST80-NC 254 291 183 12.5 254±0.5 12 305
116385-NP HCK.254-SST-M12-NBR-PC-NP-ST80-NO 254 291 183 12.5 254±0.5 12 305
117293-NP HCK.381-SST-M12-NBR-PC-NP-ST80-NC 381 418 310 12.5 381±0.5 12 384
117295-NP HCK.381-SST-M12-NBR-PC-NP-ST80-NO 381 418 310 12.5 381±0.5 12 384
118203-NP HCK.508-SST-M12-NBR-PC-NP-ST80-NC 508 545 437 12.5 508±0.5 12 462
118205-NP HCK.508-SST-M12-NBR-PC-NP-ST80-NO 508 545 437 12.5 508±0.5 12 462
113435-NP HCK.127-SST-M12-FKM-PC-NP-ST80-NC 127 164 56 12.5 127±0.5 12 228
113437-NP HCK.127-SST-M12-FKM-PC-NP-ST80-NO 127 164 56 12.5 127±0.5 12 228
114413-NP HCK.176-SST-M12-FKM-PC-NP-ST80-NC 176 213 105 12.5 176±0.5 12 258
114415-NP HCK.176-SST-M12-FKM-PC-NP-ST80-NO 176 213 105 12.5 176±0.5 12 258
116523-NP HCK.254-SST-M12-FKM-PC-NP-ST80-NC 254 291 183 12.5 254±0.5 12 305
116525-NP HCK.254-SST-M12-FKM-PC-NP-ST80-NO 254 291 183 12.5 254±0.5 12 305
117433-NP HCK.381-SST-M12-FKM-PC-NP-ST80-NC 381 418 310 12.5 381±0.5 12 384
117435-NP HCK.381-SST-M12-FKM-PC-NP-ST80-NO 381 418 310 12.5 381±0.5 12 384
118343-NP HCK.508-SST-M12-FKM-PC-NP-ST80-NC 508 545 437 12.5 508±0.5 12 462
118345-NP HCK.508-SST-M12-FKM-PC-NP-ST80-NO 508 545 437 12.5 508±0.5 12 462
HCK-STL with temperature electrical probe
HCK-STL with temperature electrical probe
HCK-STL with temperature electrical probe
HCK-STL
Filter
Code Description f L e d'-0.2 f' C#
[Nm]
Weight
113007 HCK.127-ZN-M12-NBR-PC-P-STL 127 164 56 12.5 127±0.5 12 228
114007 HCK.176-ZN-M12-NBR-PC-P-STL 176 213 105 12.5 176±0.5 12 258
116107 HCK.254-ZN-M12-NBR-PC-P-STL 254 291 183 12.5 254±0.5 12 305
117007 HCK.381-ZN-M12-NBR-PC-P-STL 381 418 310 12.5 381±0.5 12 384
117907 HCK.508-ZN-M12-NBR-PC-P-STL 508 545 437 12.5 508±0.5 12 462
113137 HCK.127-ZN-M12-FKM-PC-P-STL 127 164 56 12.5 127±0.5 12 228
114137 HCK.176-ZN-M12-FKM-PC-P-STL 176 213 105 12.5 176±0.5 12 258
116237 HCK.254-ZN-M12-FKM-PC-P-STL 254 291 183 12.5 254±0.5 12 305
117147 HCK.381-ZN-M12-FKM-PC-P-STL 381 418 310 12.5 381±0.5 12 384
118057 HCK.508-ZN-M12-FKM-PC-P-STL 508 545 437 12.5 508±0.5 12 462
113049 HCK.127-ZN-M12-NBR-GL-P-STL 127 164 56 12.5 127±0.5 12 228
114049 HCK.176-ZN-M12-NBR-GL-P-STL 176 213 105 12.5 176±0.5 12 258
116149 HCK.254-ZN-M12-NBR-GL-P-STL 254 291 183 12.5 254±0.5 12 305
117049 HCK.381-ZN-M12-NBR-GL-P-STL 381 418 310 12.5 381±0.5 12 384
117949 HCK.508-ZN-M12-NBR-GL-P-STL 508 545 437 12.5 508±0.5 12 462
113181 HCK.127-ZN-M12-FKM-GL-P-STL 127 164 56 12.5 127±0.5 12 228
114181 HCK.176-ZN-M12-FKM-GL-P-STL 176 213 105 12.5 176±0.5 12 258
116281 HCK.254-ZN-M12-FKM-GL-P-STL 254 291 183 12.5 254±0.5 12 305
117191 HCK.381-ZN-M12-FKM-GL-P-STL 381 418 310 12.5 381±0.5 12 384
118101 HCK.508-ZN-M12-FKM-GL-P-STL 508 545 437 12.5 508±0.5 12 462
113007-NP HCK.127-ZN-M12-NBR-PC-NP-STL 127 164 56 12.5 127±0.5 12 228
114007-NP HCK.176-ZN-M12-NBR-PC-NP-STL 176 213 105 12.5 176±0.5 12 258
116107-NP HCK.254-ZN-M12-NBR-PC-NP-STL 254 291 183 12.5 254±0.5 12 305
117007-NP HCK.381-ZN-M12-NBR-PC-NP-STL 381 418 310 12.5 381±0.5 12 384
117907-NP HCK.508-ZN-M12-NBR-PC-NP-STL 508 545 437 12.5 508±0.5 12 462
113137-NP HCK.127-ZN-M12-FKM-PC-NP-STL 127 164 56 12.5 127±0.5 12 228
114137-NP HCK.176-ZN-M12-FKM-PC-NP-STL 176 213 105 12.5 176±0.5 12 258
116237-NP HCK.254-ZN-M12-FKM-PC-NP-STL 254 291 183 12.5 254±0.5 12 305
117147-NP HCK.381-ZN-M12-FKM-PC-NP-STL 381 418 310 12.5 381±0.5 12 384
118057-NP HCK.508-ZN-M12-FKM-PC-NP-STL 508 545 437 12.5 508±0.5 12 462
HCK-STL
Filter
Code Description f L e d'-0.2 f' C#
[Nm]
Weight
113307 HCK.127-SST-M12-NBR-PC-P-STL 127 164 56 12.5 127±0.5 12 228
114277 HCK.176-SST-M12-NBR-PC-P-STL 176 213 105 12.5 176±0.5 12 258
116387 HCK.254-SST-M12-NBR-PC-P-STL 254 291 183 12.5 254±0.5 12 305
117297 HCK.381-SST-M12-NBR-PC-P-STL 381 418 310 12.5 381±0.5 12 384
118207 HCK.508-SST-M12-NBR-PC-P-STL 508 545 437 12.5 508±0.5 12 462
113439 HCK.127-SST-M12-FKM-PC-P-STL 127 164 56 12.5 127±0.5 12 228
114417 HCK.176-SST-M12-FKM-PC-P-STL 176 213 105 12.5 176±0.5 12 258
116527 HCK.254-SST-M12-FKM-PC-P-STL 254 291 183 12.5 254±0.5 12 305
117437 HCK.381-SST-M12-FKM-PC-P-STL 381 418 310 12.5 381±0.5 12 384
118347 HCK.508-SST-M12-FKM-PC-P-STL 508 545 437 12.5 508±0.5 12 462
113351 HCK.127-SST-M12-NBR-GL-P-STL 127 164 56 12.5 127±0.5 12 228
114321 HCK.176-SST-M12-NBR-GL-P-STL 176 213 105 12.5 176±0.5 12 258
116431 HCK.254-SST-M12-NBR-GL-P-STL 254 291 183 12.5 254±0.5 12 305
117341 HCK.381-SST-M12-NBR-GL-P-STL 381 418 310 12.5 381±0.5 12 384
118251 HCK.508-SST-M12-NBR-GL-P-STL 508 545 437 12.5 508±0.5 12 462
113481 HCK.127-SST-M12-FKM-GL-P-STL 127 164 56 12.5 127±0.5 12 228
114459 HCK.176-SST-M12-FKM-GL-P-STL 176 213 105 12.5 176±0.5 12 258
116569 HCK.254-SST-M12-FKM-GL-P-STL 254 291 183 12.5 254±0.5 12 305
117479 HCK.381-SST-M12-FKM-GL-P-STL 381 418 310 12.5 381±0.5 12 384
118389 HCK.508-SST-M12-FKM-GL-P-STL 508 545 437 12.5 508±0.5 12 462
113307-NP HCK.127-SST-M12-NBR-PC-NP-STL 127 164 56 12.5 127±0.5 12 228
114277-NP HCK.176-SST-M12-NBR-PC-NP-STL 176 213 105 12.5 176±0.5 12 258
116387-NP HCK.254-SST-M12-NBR-PC-NP-STL 254 291 183 12.5 254±0.5 12 305
117297-NP HCK.381-SST-M12-NBR-PC-NP-STL 381 418 310 12.5 381±0.5 12 384
118207-NP HCK.508-SST-M12-NBR-PC-NP-STL 508 545 437 12.5 508±0.5 12 462
113439-NP HCK.127-SST-M12-FKM-PC-NP-STL 127 164 56 12.5 127±0.5 12 228
114417-NP HCK.176-SST-M12-FKM-PC-NP-STL 176 213 105 12.5 176±0.5 12 258
116527-NP HCK.254-SST-M12-FKM-PC-NP-STL 254 291 183 12.5 254±0.5 12 305
117437-NP HCK.381-SST-M12-FKM-PC-NP-STL 381 418 310 12.5 381±0.5 12 384
118347-NP HCK.508-SST-M12-FKM-PC-NP-STL 508 545 437 12.5 508±0.5 12 462