GN 1804.2 Slotted locknuts with thread locking


  • RoHS

Description

Specification

Nut
Steel ST
  • Tensile strength class 5.8
  • blackened
Set screw
Steel, blackened

Information

GN 1804.2 slotted locknuts with thread locking can be secured against twisting by twisting off the threaded shaft via a d4 set screw. The thread flanks of the nut ensure damage-free securing and can be used as often as needed.
The d3 offset plane surface is intended as an axial contact surface.

Accessory

  • C-Spanner DIN 1810 (Code no. see table)

Technical information

Slotted locknuts with thread locking GN 1804.2
GN 1804.2
Filter
Description d1 d2 d3 d4 b h Code no. for
C-Spanner
Weight
GN 1804.2-M12x1,5-ST M12x1.5 28 23 M4 5 6 DIN 1810-A25-28 20
GN 1804.2-M14x1,5-ST M14x1.5 30 25 M4 5 7 DIN 1810-A30-32 26
GN 1804.2-M16x1,5-ST M16x1.5 32 27 M5 5 7 DIN 1810-A30-32 29
GN 1804.2-M18x1,5-ST M18x1.5 34 28 M5 6 8 DIN 1810-A34-36 35
GN 1804.2-M20x1,5-ST M20x1.5 36 30 M5 6 8 DIN 1810-A34-36 38
GN 1804.2-M22x1,5-ST M22x1.5 40 34 M5 6 9 DIN 1810-A40-42 55
GN 1804.2-M24x1,5-ST M24x1.5 42 36 M5 6 9 DIN 1810-A40-42 58
GN 1804.2-M30x1,5-ST M30x1.5 50 43 M5 7 10 DIN 1810-A45-50 88
GN 1804.2-M35x1,5-ST M35x1.5 55 48 M6 7 11 DIN 1810-A52-55 111
GN 1804.2-M40x1,5-ST M40x1.5 62 54 M8 8 12 DIN 1810-A58-62 150