GN 5860 Load rings


  • RoHS

Description

Specification

Chain ring
Steel, German Material No. 1.6540
  • high-tensile tempered
  • 100% electro magnetic tensile tested to EN 1677
  • plastic coated, pink
Eye ring
Steel, German Material No. 1.6541
  • forged
  • high-tensile tempered
  • 100 % electro magnetic tensile tested
  • plastic coated, pink
Bearing case
Steel, German Material No. 1.6541
  • forged
  • high-tensile tempered
  • 100 % electro magnetic tensile tested
  • zinc plated, blue passivated
Screw
Steel
Tensile strength class 10.9 (1000 N/mm2)
Finish: Delta Tone

Information

Load rings GN 5860 rotate running in ball bearings. The freely rotating ring allows the bolts to hold loads in any tensile direction.
The rated load-bearing capacity is shown clearly on the swivel eye bolt. It is valid for the most unfavourable case in term of the types of load listed opposite. Load rings GN 5860 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.

Technical information

Method of mounting
Number11222223 and 43 and 43 and 4
Angles of inclination90°90°0° to 45 °45° to 60°asymm.0° to 45°45° to 60°asymm.
Factor11221.4112.11.51
M 80.60 t0.30 t1.20 t0.60 t0.42 t0.30 t0.30 t0.63 t0.45 t0.30 t
M 100.90 t0.45 t1.80 t0.90 t0.63 t0.45 t0.45 t0.94 t0.67 t0.45 t
M 121.20 t0.60 t2.40 t1.20 t0.84 t0.60 t0.60 t1.26 t0.90 t0.60 t
M 162.60 t1.30 t5.20 t2.60 t1.81 t1.30 t1.30 t2.73 t1.95 t1.30 t
M 204.00 t2.00 t8.00 t4.00 t2.80 t2.00 t2.00 t4.20 t3.00 t2.00 t
M 247.00 t3.50 t14.00 t7.00 t4.90 t3.50 t3.50 t7.35 t5.25 t3.50 t
M 3010.00 t5.00 t20.00 t10.00 t7.00 t5.00 t5.00 t10.50 t7.50 t5.00 t

Safety instructions

The above load capacity table shows the maximum loads in metric tonnes as factor of the load ring type and at an operating temperature range of –40 °C to +100 °C, with a safety coefficient of 4 taken into account for all values.
The load ring GN 5860 may be used only if it is bolted with the minimum screw-in depth which depends on the material and if the bolt contact surface is plane and fixed at a right angle to the tap hole.
If permanently mounted in place, the swivel eye bolt must rotate freely by 360° and must not rest on edges or other fixture, e.g. crane hooks. The load rings are not suitable for permanent rotary movement under load exposure.
Operating insctructions with more details and specification are included with every delivery (see www.elesa-ganter.com).

On request

  • other screw length l
Load rings  GN 5860
GN 5860
Filter
Description d1 l e h1 h2 h3 h4 k1 k2 k3 k4 A/F Tightening torque
in Nm
Nominal load
in t
Weight
GN 5860-M8-13 M 8 13 84 84 76 31 45 8 45 29 44 28 10 0.30 175
GN 5860-M10-17 M 10 17 86 86 78 31 47 8 45 29 44 30 10 0.45 205
GN 5860-M12-21 M 12 21 117 117 107 49 58 10 55 35 65 36 10 0.60 400
GN 5860-M16-25 M 16 25 126 126 113 46 67 13 64 38 65 41 30 1.30 664
GN 5860-M20-33 M 20 33 150 150 137 54 83 13 61 35 77 55 70 2.00 1294
GN 5860-M24-40 M 24 40 191 191 173 66 107 18 76 40 94 70 150 3.50 2647
GN 5860-M30-50 M 30 50 243 243 221 90 131 22 94 50 126 85 225 5.00 4950