HCK-E - HCK-E-ST - HCK-E-STL Column level indicators with level and temperature sensor


Description

Main specifications

Assembly ends

Glass-fibre reinforced polyamide based (PA) technopolymer, black colour.

Support

Aluminium in natural colour.

Graduated contrast screen

White lacquered aluminium. It can be taken out before assembly to allow the insertion of level lines or words.

Float

Technopolymer, black colour, with a built-in magnetic element to activate the electric contact when the float reaches the contact threshold located at about 55 mm above the axis of the lower screw (data referred to mineral oil type CB68, according to ISO 3498, temperature 23°C).

Bracket with sensors

Watertight glass-fibre reinforced polyamide based (PA) technopolymer, black colour.

Swivelling connector

With built-in cable gland and contact holder. Front or axial output (high or low) ensuring protection against water sprays (protection class IP 65 according to table EN 60529 table.

Standard executions

See configuration table.

General information

Features and performances

Thanks to the side output of the connector, HCK-E-ST/STL level indicator allows to minimise the level of intervention of the sensor.

Technical data

In laboratory tests carried out for a relatively limited time with the following liquids at a temperature of 23° C: mineral oil type CB68 (according to ISO 3498) for HCK, mineral oil type CB68 (according to ISO 3498) water or water/glycol-based solutions ( 50%) for HCK-GL, the resistance values were much higher than 35 bar.
For use with other fluids and under different pressure and temperature conditions, please contact ELESA Technical Department.
In any case we suggest to verify the suitability of the product under the actual working conditions.

Electrical features

Functioning of the MIN level electrical sensor

  • NO: the electrical contact closes on reaching the minimum level.
  • NC: the electrical contact is opened when it reaches the minimum level.
  • SW (change-over electrical contact): the electrical contact switches between the two terminals.
Electrical featuresMIN level sensor
Tension feedAC/DC
Electric contactsNO normally open
NC normally closed
SW change-over contact
Maximum applicable voltageNO: 140 Vac, 200 Vdc
NC: 140 Vac, 150 Vdc
SW: 140 Vac, 150 Vdc
Maximum switching current1 A
Maximum currentNO: 1.2A
NC: 2A
SW: 2A
Maximum commutable powerNO: 10 Va
NC: 20 Va
SW: 20 Va
Cable glandPg 7 (for cables in sheath with Ø 6 or 7 mm)
Conductors cross-sectionMax. 1.5 mm2
Do not mount this indicator in proximity to magnetic fields.

Functioning of the MAX temperature sensor

  • NO: the electrical contact closes when the pre-set temperature is reached at 80°C.
  • NC: the electrical contact opens when the pre-set temperature at 80°C is reached.
Electrical featuresMAX temperature sensor
Tension feedAC/DC
Electric contactsNO normally open
NC normally closed
Voltage /
Maximum current
250 Vac - 2 A(resisteve loads)
115 Vac- 3A
24 Vdc - 3 A
12 Vdc - 4 A
Minimum current50 mA
Cable glandPg 7 (for cables in sheath with Ø 6 or 7 mm)
Conductors cross-sectionMax. 1.5 mm2

Functioning of the temperature electrical probe

The working principle of the temperature probe is to measure the variation of resistance of a platinum element: 100 ohm = 0°C, 138.4 ohm = 100°C.
The function between temperature (T) and resistance (R) is approximately linear over a small temperature range: for example, if you assume that it is linear over the 0° to 100°C range, the error at 50°C is 0.4°C.
For precision measurement, it is necessary to linearise the resistance to give an accurate temperature. The most recent definition of the function between resistance and temperature is International Temperature Standard 90 (ITS-90). The function between resistance and temperature, obtained in laboratory tests, measuring directly the resistance value on the contacts is shown in the graph. We suggest, anyway, to set the system in order to compensate both heat dissipation and cable resistance.

A 1°C temperature change will cause a 0.384 ohm change in resistance, so even a small error in measurement of the resistance (for example, the resistance of the wires leading to the sensor) can cause a large error in the measurement of the temperature.
Because of the low signal levels, it is important to keep any cables away from electric cables, motors, switchgear and other devices that may emit magnetic or electrical noise. Using screened cable, with the screen grounded at one end, may help to reduce interference.
When using long cables, it is necessary to check that the measuring equipment is able to handle the cable resistance.
Electrical featuresTemperature probe
Tension feedAC/DC
Maximum current1mA
Cable glandPg 7 (for cables in sheath with Ø 6 or 7 mm)
Conductors cross-sectionMax. 1.5 mm2
Do not mount this indicator in proximity to magnetic fields.

Other executions

Special executions on request

  • Column level window in transparent methylmatacrylate (PMMA) for max 70°C use.
  • Indicators with level visibility (e) up to 1 429 mm and fixing holes with hole centre distance (f) up to 1500 mm.
  • Packing rings in special material depending on the customer's needs.
  • Special screw with nickel-plated brass tap to be fitted to the lower assembly end for any maintenance operation requiring the indicator exclusion.

Instructions of use

Connector assembly instructions

  1. Remove the connector from the indicator by unscrewing the set screw placed on the connector, take the contact holders out and loosen the cable gland.
  2. See Fig.3 to proceed with the wiring according to the chosen product.
  3. Assemble by pressing the contact holder into the connector in the required position.
  4. Screw the connectors to the indicator and then tighten the cable glands.
HCK-E with MIN level electrical sensor
HCK-E with MIN level electrical sensor
HCK-E with MIN level electrical sensor
HCK-E
Filter
Code Description f L e d'-0.2 f' C#
[Nm]
Weight
113011 HCK.127-ZN-M12-NBR-PC-P-E-NC 127 164 56 12.5 127±0.5 12 231
113009 HCK.127-ZN-M12-NBR-PC-P-E-NO 127 164 56 12.5 127±0.5 12 231
113013 HCK.127-ZN-M12-NBR-PC-P-E-SW 127 164 56 12.5 127±0.5 12 231
114011 HCK.176-ZN-M12-NBR-PC-P-E-NC 176 213 105 12.5 176±0.5 12 261
114009 HCK.176-ZN-M12-NBR-PC-P-E-NO 176 213 105 12.5 176±0.5 12 261
114013 HCK.176-ZN-M12-NBR-PC-P-E-SW 176 213 105 12.5 176±0.5 12 261
116111 HCK.254-ZN-M12-NBR-PC-P-E-NC 254 291 183 12.5 254±0.5 12 309
116109 HCK.254-ZN-M12-NBR-PC-P-E-NO 254 291 183 12.5 254±0.5 12 309
116113 HCK.254-ZN-M12-NBR-PC-P-E-SW 254 291 183 12.5 254±0.5 12 309
117011 HCK.381-ZN-M12-NBR-PC-P-E-NC 381 418 310 12.5 381±0.5 12 388
117009 HCK.381-ZN-M12-NBR-PC-P-E-NO 381 418 310 12.5 381±0.5 12 388
117013 HCK.381-ZN-M12-NBR-PC-P-E-SW 381 418 310 12.5 381±0.5 12 388
117911 HCK.508-ZN-M12-NBR-PC-P-E-NC 508 545 437 12.5 508±0.5 12 466
117909 HCK.508-ZN-M12-NBR-PC-P-E-NO 508 545 437 12.5 508±0.5 12 466
117913 HCK.508-ZN-M12-NBR-PC-P-E-SW 508 545 437 12.5 508±0.5 12 466
113141 HCK.127-ZN-M12-FKM-PC-P-E-NC 127 164 437 12.5 127±0.5 12 231
113139 HCK.127-ZN-M12-FKM-PC-P-E-NO 127 164 437 12.5 127±0.5 12 231
113143 HCK.127-ZN-M12-FKM-PC-P-E-SW 127 164 437 12.5 127±0.5 12 231
114141 HCK.176-ZN-M12-FKM-PC-P-E-NC 176 213 437 12.5 176±0.5 12 261
114139 HCK.176-ZN-M12-FKM-PC-P-E-NO 176 213 437 12.5 176±0.5 12 261
114143 HCK.176-ZN-M12-FKM-PC-P-E-SW 176 213 437 12.5 176±0.5 12 261
116241 HCK.254-ZN-M12-FKM-PC-P-E-NC 254 291 437 12.5 254±0.5 12 309
116239 HCK.254-ZN-M12-FKM-PC-P-E-NO 254 291 437 12.5 254±0.5 12 309
116243 HCK.254-ZN-M12-FKM-PC-P-E-SW 254 291 437 12.5 254±0.5 12 309
117151 HCK.381-ZN-M12-FKM-PC-P-E-NC 381 418 437 12.5 381±0.5 12 388
117149 HCK.381-ZN-M12-FKM-PC-P-E-NO 381 418 437 12.5 381±0.5 12 388
117153 HCK.381-ZN-M12-FKM-PC-P-E-SW 381 418 437 12.5 381±0.5 12 388
118061 HCK.508-ZN-M12-FKM-PC-P-E-NC 508 545 437 12.5 508±0.5 12 466
118059 HCK.508-ZN-M12-FKM-PC-P-E-NO 508 545 437 12.5 508±0.5 12 466
118063 HCK.508-ZN-M12-FKM-PC-P-E-SW 508 545 437 12.5 508±0.5 12 466
113159 HCK.127-ZN-M12-FKM-PC-P-E-HT-NC 127 164 437 12.5 127±0.5 12 231
113157 HCK.127-ZN-M12-FKM-PC-P-E-HT-NO 127 164 437 12.5 127±0.5 12 231
113161 HCK.127-ZN-M12-FKM-PC-P-E-HT-SW 127 164 437 12.5 127±0.5 12 231
114159 HCK.176-ZN-M12-FKM-PC-P-E-HT-NC 176 213 437 12.5 176±0.5 12 261
114157 HCK.176-ZN-M12-FKM-PC-P-E-HT-NO 176 213 437 12.5 176±0.5 12 261
114161 HCK.176-ZN-M12-FKM-PC-P-E-HT-SW 176 213 437 12.5 176±0.5 12 261
116259 HCK.254-ZN-M12-FKM-PC-P-E-HT-NC 254 291 437 12.5 254±0.5 12 309
116257 HCK.254-ZN-M12-FKM-PC-P-E-HT-NO 254 291 437 12.5 254±0.5 12 309
116261 HCK.254-ZN-M12-FKM-PC-P-E-HT-SW 254 291 437 12.5 254±0.5 12 309
117169 HCK.381-ZN-M12-FKM-PC-P-E-HT-NC 381 418 437 12.5 381±0.5 12 388
117167 HCK.381-ZN-M12-FKM-PC-P-E-HT-NO 381 418 437 12.5 381±0.5 12 388
117171 HCK.381-ZN-M12-FKM-PC-P-E-HT-SW 381 418 437 12.5 381±0.5 12 388
118079 HCK.508-ZN-M12-FKM-PC-P-E-HT-NC 508 545 437 12.5 508±0.5 12 466
118077 HCK.508-ZN-M12-FKM-PC-P-E-HT-NO 508 545 437 12.5 508±0.5 12 466
118081 HCK.508-ZN-M12-FKM-PC-P-E-HT-SW 508 545 437 12.5 508±0.5 12 466
113053 HCK.127-ZN-M12-NBR-GL-P-E-NC 127 164 437 12.5 127±0.5 12 231
113051 HCK.127-ZN-M12-NBR-GL-P-E-NO 127 164 437 12.5 127±0.5 12 231
113055 HCK.127-ZN-M12-NBR-GL-P-E-SW 127 164 437 12.5 127±0.5 12 231
114053 HCK.176-ZN-M12-NBR-GL-P-E-NC 176 213 437 12.5 176±0.5 12 261
114051 HCK.176-ZN-M12-NBR-GL-P-E-NO 176 213 437 12.5 176±0.5 12 261
114055 HCK.176-ZN-M12-NBR-GL-P-E-SW 176 213 437 12.5 176±0.5 12 261
116153 HCK.254-ZN-M12-NBR-GL-P-E-NC 254 291 437 12.5 254±0.5 12 309
116151 HCK.254-ZN-M12-NBR-GL-P-E-NO 254 291 437 12.5 254±0.5 12 309
116155 HCK.254-ZN-M12-NBR-GL-P-E-SW 254 291 437 12.5 254±0.5 12 309
117053 HCK.381-ZN-M12-NBR-GL-P-E-NC 381 418 437 12.5 381±0.5 12 388
117051 HCK.381-ZN-M12-NBR-GL-P-E-NO 381 418 437 12.5 381±0.5 12 388
117055 HCK.381-ZN-M12-NBR-GL-P-E-SW 381 418 437 12.5 381±0.5 12 388
117953 HCK.508-ZN-M12-NBR-GL-P-E-NC 508 545 437 12.5 508±0.5 12 466
117951 HCK.508-ZN-M12-NBR-GL-P-E-NO 508 545 437 12.5 508±0.5 12 466
117955 HCK.508-ZN-M12-NBR-GL-P-E-SW 508 545 437 12.5 508±0.5 12 466
113185 HCK.127-ZN-M12-FKM-GL-P-E-NC 127 164 437 12.5 127±0.5 12 231
113183 HCK.127-ZN-M12-FKM-GL-P-E-NO 127 164 437 12.5 127±0.5 12 231
113187 HCK.127-ZN-M12-FKM-GL-P-E-SW 127 164 437 12.5 127±0.5 12 231
114185 HCK.176-ZN-M12-FKM-GL-P-E-NC 176 213 437 12.5 176±0.5 12 261
114183 HCK.176-ZN-M12-FKM-GL-P-E-NO 176 213 437 12.5 176±0.5 12 261
114187 HCK.176-ZN-M12-FKM-GL-P-E-SW 176 213 437 12.5 176±0.5 12 261
116285 HCK.254-ZN-M12-FKM-GL-P-E-NC 254 291 437 12.5 254±0.5 12 309
116283 HCK.254-ZN-M12-FKM-GL-P-E-NO 254 291 437 12.5 254±0.5 12 309
116287 HCK.254-ZN-M12-FKM-GL-P-E-SW 254 291 437 12.5 254±0.5 12 309
117195 HCK.381-ZN-M12-FKM-GL-P-E-NC 381 418 437 12.5 381±0.5 12 388
117193 HCK.381-ZN-M12-FKM-GL-P-E-NO 381 418 437 12.5 381±0.5 12 388
117197 HCK.381-ZN-M12-FKM-GL-P-E-SW 381 418 437 12.5 381±0.5 12 388
118105 HCK.508-ZN-M12-FKM-GL-P-E-NC 508 545 437 12.5 508±0.5 12 466
118103 HCK.508-ZN-M12-FKM-GL-P-E-NO 508 545 437 12.5 508±0.5 12 466
118107 HCK.508-ZN-M12-FKM-GL-P-E-SW 508 545 437 12.5 508±0.5 12 466
113203 HCK.127-ZN-M12-FKM-GL-P-E-HT-NC 127 164 437 12.5 127±0.5 12 231
113201 HCK.127-ZN-M12-FKM-GL-P-E-HT-NO 127 164 437 12.5 127±0.5 12 231
113205 HCK.127-ZN-M12-FKM-GL-P-E-HT-SW 127 164 437 12.5 127±0.5 12 231
114203 HCK.176-ZN-M12-FKM-GL-P-E-HT-NC 176 213 437 12.5 176±0.5 12 261
114201 HCK.176-ZN-M12-FKM-GL-P-E-HT-NO 176 213 437 12.5 176±0.5 12 261
114205 HCK.176-ZN-M12-FKM-GL-P-E-HT-SW 176 213 437 12.5 176±0.5 12 261
116303 HCK.254-ZN-M12-FKM-GL-P-E-HT-NC 254 291 437 12.5 254±0.5 12 309
116301 HCK.254-ZN-M12-FKM-GL-P-E-HT-NO 254 291 437 12.5 254±0.5 12 309
116305 HCK.254-ZN-M12-FKM-GL-P-E-HT-SW 254 291 437 12.5 254±0.5 12 309
117213 HCK.381-ZN-M12-FKM-GL-P-E-HT-NC 381 418 437 12.5 381±0.5 12 388
117211 HCK.381-ZN-M12-FKM-GL-P-E-HT-NO 381 418 437 12.5 381±0.5 12 388
117215 HCK.381-ZN-M12-FKM-GL-P-E-HT-SW 381 418 437 12.5 381±0.5 12 388
118123 HCK.508-ZN-M12-FKM-GL-P-E-HT-NC 508 545 437 12.5 508±0.5 12 466
118121 HCK.508-ZN-M12-FKM-GL-P-E-HT-NO 508 545 437 12.5 508±0.5 12 466
118125 HCK.508-ZN-M12-FKM-GL-P-E-HT-SW 508 545 437 12.5 508±0.5 12 466
HCK-E
Filter
Code Description f L e d'-0.2 f' C#
[Nm]
Weight
113311 HCK.127-SST-M12-NBR-PC-P-E-NC 127 164 437 12.5 127±0.5 12 231
113309 HCK.127-SST-M12-NBR-PC-P-E-NO 127 164 437 12.5 127±0.5 12 231
113313 HCK.127-SST-M12-NBR-PC-P-E-SW 127 164 437 12.5 127±0.5 12 231
114281 HCK.176-SST-M12-NBR-PC-P-E-NC 176 213 437 12.5 176±0.5 12 261
114279 HCK.176-SST-M12-NBR-PC-P-E-NO 176 213 437 12.5 176±0.5 12 261
114283 HCK.176-SST-M12-NBR-PC-P-E-SW 176 213 437 12.5 176±0.5 12 261
116391 HCK.254-SST-M12-NBR-PC-P-E-NC 254 291 437 12.5 254±0.5 12 309
116389 HCK.254-SST-M12-NBR-PC-P-E-NO 254 291 437 12.5 254±0.5 12 309
116393 HCK.254-SST-M12-NBR-PC-P-E-SW 254 291 437 12.5 254±0.5 12 309
117301 HCK.381-SST-M12-NBR-PC-P-E-NC 381 418 437 12.5 381±0.5 12 388
117299 HCK.381-SST-M12-NBR-PC-P-E-NO 381 418 437 12.5 381±0.5 12 388
117303 HCK.381-SST-M12-NBR-PC-P-E-SW 381 418 437 12.5 381±0.5 12 388
118211 HCK.508-SST-M12-NBR-PC-P-E-NC 508 545 437 12.5 508±0.5 12 466
118209 HCK.508-SST-M12-NBR-PC-P-E-NO 508 545 437 12.5 508±0.5 12 466
118213 HCK.508-SST-M12-NBR-PC-P-E-SW 508 545 437 12.5 508±0.5 12 466
113443 HCK.127-SST-M12-FKM-PC-P-E-NC 127 164 437 12.5 127±0.5 12 231
113441 HCK.127-SST-M12-FKM-PC-P-E-NO 127 164 437 12.5 127±0.5 12 231
113445 HCK.127-SST-M12-FKM-PC-P-E-SW 127 164 437 12.5 127±0.5 12 231
114421 HCK.176-SST-M12-FKM-PC-P-E-NC 176 213 437 12.5 176±0.5 12 261
114419 HCK.176-SST-M12-FKM-PC-P-E-NO 176 213 437 12.5 176±0.5 12 261
114423 HCK.176-SST-M12-FKM-PC-P-E-SW 176 213 437 12.5 176±0.5 12 261
116531 HCK.254-SST-M12-FKM-PC-P-E-NC 254 291 437 12.5 254±0.5 12 309
116529 HCK.254-SST-M12-FKM-PC-P-E-NO 254 291 437 12.5 254±0.5 12 309
116533 HCK.254-SST-M12-FKM-PC-P-E-SW 254 291 437 12.5 254±0.5 12 309
117441 HCK.381-SST-M12-FKM-PC-P-E-NC 381 418 437 12.5 381±0.5 12 388
117439 HCK.381-SST-M12-FKM-PC-P-E-NO 381 418 437 12.5 381±0.5 12 388
117443 HCK.381-SST-M12-FKM-PC-P-E-SW 381 418 437 12.5 381±0.5 12 388
118351 HCK.508-SST-M12-FKM-PC-P-E-NC 508 545 437 12.5 508±0.5 12 466
118349 HCK.508-SST-M12-FKM-PC-P-E-NO 508 545 437 12.5 508±0.5 12 466
118353 HCK.508-SST-M12-FKM-PC-P-E-SW 508 545 437 12.5 508±0.5 12 466
113461 HCK.127-SST-M12-FKM-PC-P-E-HT-NC 127 164 437 12.5 127±0.5 12 231
113459 HCK.127-SST-M12-FKM-PC-P-E-HT-NO 127 164 437 12.5 127±0.5 12 231
113463 HCK.127-SST-M12-FKM-PC-P-E-HT-SW 127 164 437 12.5 127±0.5 12 231
114439 HCK.176-SST-M12-FKM-PC-P-E-HT-NC 176 213 437 12.5 176±0.5 12 261
114437 HCK.176-SST-M12-FKM-PC-P-E-HT-NO 176 213 437 12.5 176±0.5 12 261
114441 HCK.176-SST-M12-FKM-PC-P-E-HT-SW 176 213 437 12.5 176±0.5 12 261
116549 HCK.254-SST-M12-FKM-PC-P-E-HT-NC 254 291 437 12.5 254±0.5 12 309
116547 HCK.254-SST-M12-FKM-PC-P-E-HT-NO 254 291 437 12.5 254±0.5 12 309
116551 HCK.254-SST-M12-FKM-PC-P-E-HT-SW 254 291 437 12.5 254±0.5 12 309
117459 HCK.381-SST-M12-FKM-PC-P-E-HT-NC 381 418 437 12.5 381±0.5 12 388
117457 HCK.381-SST-M12-FKM-PC-P-E-HT-NO 381 418 437 12.5 381±0.5 12 388
117461 HCK.381-SST-M12-FKM-PC-P-E-HT-SW 381 418 437 12.5 381±0.5 12 388
118369 HCK.508-SST-M12-FKM-PC-P-E-HT-NC 508 545 437 12.5 508±0.5 12 466
118367 HCK.508-SST-M12-FKM-PC-P-E-HT-NO 508 545 437 12.5 508±0.5 12 466
118371 HCK.508-SST-M12-FKM-PC-P-E-HT-SW 508 545 437 12.5 508±0.5 12 466
113355 HCK.127-SST-M12-NBR-GL-P-E-NC 127 164 437 12.5 127±0.5 12 231
113353 HCK.127-SST-M12-NBR-GL-P-E-NO 127 164 437 12.5 127±0.5 12 231
113357 HCK.127-SST-M12-NBR-GL-P-E-SW 127 164 437 12.5 127±0.5 12 231
114325 HCK.176-SST-M12-NBR-GL-P-E-NC 176 213 437 12.5 176±0.5 12 261
114323 HCK.176-SST-M12-NBR-GL-P-E-NO 176 213 437 12.5 176±0.5 12 261
114327 HCK.176-SST-M12-NBR-GL-P-E-SW 176 213 437 12.5 176±0.5 12 261
116435 HCK.254-SST-M12-NBR-GL-P-E-NC 254 291 437 12.5 254±0.5 12 309
116433 HCK.254-SST-M12-NBR-GL-P-E-NO 254 291 437 12.5 254±0.5 12 309
116437 HCK.254-SST-M12-NBR-GL-P-E-SW 254 291 437 12.5 254±0.5 12 309
117345 HCK.381-SST-M12-NBR-GL-P-E-NC 381 418 437 12.5 381±0.5 12 388
117343 HCK.381-SST-M12-NBR-GL-P-E-NO 381 418 437 12.5 381±0.5 12 388
117347 HCK.381-SST-M12-NBR-GL-P-E-SW 381 418 437 12.5 381±0.5 12 388
118255 HCK.508-SST-M12-NBR-GL-P-E-NC 508 545 437 12.5 508±0.5 12 466
118253 HCK.508-SST-M12-NBR-GL-P-E-NO 508 545 437 12.5 508±0.5 12 466
118257 HCK.508-SST-M12-NBR-GL-P-E-SW 508 545 437 12.5 508±0.5 12 466
113485 HCK.127-SST-M12-FKM-GL-P-E-NC 127 164 437 12.5 127±0.5 12 231
113483 HCK.127-SST-M12-FKM-GL-P-E-NO 127 164 437 12.5 127±0.5 12 231
113487 HCK.127-SST-M12-FKM-GL-P-E-SW 127 164 437 12.5 127±0.5 12 231
114463 HCK.176-SST-M12-FKM-GL-P-E-NC 176 213 437 12.5 176±0.5 12 261
114461 HCK.176-SST-M12-FKM-GL-P-E-NO 176 213 437 12.5 176±0.5 12 261
114465 HCK.176-SST-M12-FKM-GL-P-E-SW 176 213 437 12.5 176±0.5 12 261
116573 HCK.254-SST-M12-FKM-GL-P-E-NC 254 291 437 12.5 254±0.5 12 309
116571 HCK.254-SST-M12-FKM-GL-P-E-NO 254 291 437 12.5 254±0.5 12 309
116575 HCK.254-SST-M12-FKM-GL-P-E-SW 254 291 437 12.5 254±0.5 12 309
117483 HCK.381-SST-M12-FKM-GL-P-E-NC 381 418 437 12.5 381±0.5 12 388
117481 HCK.381-SST-M12-FKM-GL-P-E-NO 381 418 437 12.5 381±0.5 12 388
117485 HCK.381-SST-M12-FKM-GL-P-E-SW 381 418 437 12.5 381±0.5 12 388
118393 HCK.508-SST-M12-FKM-GL-P-E-NC 508 545 437 12.5 508±0.5 12 466
118391 HCK.508-SST-M12-FKM-GL-P-E-NO 508 545 437 12.5 508±0.5 12 466
118395 HCK.508-SST-M12-FKM-GL-P-E-SW 508 545 437 12.5 508±0.5 12 466
113503 HCK.127-SST-M12-FKM-GL-P-E-HT-NC 127 164 437 12.5 127±0.5 12 231
113501 HCK.127-SST-M12-FKM-GL-P-E-HT-NO 127 164 437 12.5 127±0.5 12 231
113505 HCK.127-SST-M12-FKM-GL-P-E-HT-SW 127 164 437 12.5 127±0.5 12 231
114481 HCK.176-SST-M12-FKM-GL-P-E-HT-NC 176 213 437 12.5 176±0.5 12 261
114479 HCK.176-SST-M12-FKM-GL-P-E-HT-NO 176 213 437 12.5 176±0.5 12 261
114483 HCK.176-SST-M12-FKM-GL-P-E-HT-SW 176 213 437 12.5 176±0.5 12 261
116591 HCK.254-SST-M12-FKM-GL-P-E-HT-NC 254 291 437 12.5 254±0.5 12 309
116589 HCK.254-SST-M12-FKM-GL-P-E-HT-NO 254 291 437 12.5 254±0.5 12 309
116593 HCK.254-SST-M12-FKM-GL-P-E-HT-SW 254 291 437 12.5 254±0.5 12 309
117501 HCK.381-SST-M12-FKM-GL-P-E-HT-NC 381 418 437 12.5 381±0.5 12 388
117499 HCK.381-SST-M12-FKM-GL-P-E-HT-NO 381 418 437 12.5 381±0.5 12 388
117503 HCK.381-SST-M12-FKM-GL-P-E-HT-SW 381 418 437 12.5 381±0.5 12 388
118411 HCK.508-SST-M12-FKM-GL-P-E-HT-NC 508 545 437 12.5 508±0.5 12 466
118409 HCK.508-SST-M12-FKM-GL-P-E-HT-NO 508 545 437 12.5 508±0.5 12 466
118413 HCK.508-SST-M12-FKM-GL-P-E-HT-SW 508 545 437 12.5 508±0.5 12 466
HCK-E-ST with MIN level and MAX temperature electrical sensors
HCK-E-ST with MIN level and MAX temperature electrical sensors
HCK-E-ST with MIN level and MAX temperature electrical sensors
HCK-E-ST
Filter
Code Description f L e d'-0.2 f' C#
[Nm]
Weight
113019 HCK.127-ZN-M12-NBR-PC-P-E-NC-ST80-NC 127 164 56 12.5 127±0.5 12 231
113017 HCK.127-ZN-M12-NBR-PC-P-E-NO-ST80-NO 127 164 56 12.5 127±0.5 12 231
114019 HCK.176-ZN-M12-NBR-PC-P-E-NC-ST80-NC 176 213 105 12.5 176±0.5 12 261
114017 HCK.176-ZN-M12-NBR-PC-P-E-NO-ST80-NO 176 213 105 12.5 176±0.5 12 261
116119 HCK.254-ZN-M12-NBR-PC-P-E-NC-ST80-NC 254 291 183 12.5 254±0.5 12 309
116117 HCK.254-ZN-M12-NBR-PC-P-E-NO-ST80-NO 254 291 183 12.5 254±0.5 12 309
117019 HCK.381-ZN-M12-NBR-PC-P-E-NC-ST80-NC 381 418 310 12.5 381±0.5 12 388
117017 HCK.381-ZN-M12-NBR-PC-P-E-NO-ST80-NO 381 418 310 12.5 381±0.5 12 388
117919 HCK.508-ZN-M12-NBR-PC-P-E-NC-ST80-NC 508 545 437 12.5 508±0.5 12 466
117917 HCK.508-ZN-M12-NBR-PC-P-E-NO-ST80-NO 508 545 437 12.5 508±0.5 12 466
113149 HCK.127-ZN-M12-FKM-PC-P-E-NC-ST80-NC 127 164 437 12.5 127±0.5 12 231
113147 HCK.127-ZN-M12-FKM-PC-P-E-NO-ST80-NO 127 164 437 12.5 127±0.5 12 231
114149 HCK.176-ZN-M12-FKM-PC-P-E-NC-ST80-NC 176 213 437 12.5 176±0.5 12 261
114147 HCK.176-ZN-M12-FKM-PC-P-E-NO-ST80-NO 176 213 437 12.5 176±0.5 12 261
116249 HCK.254-ZN-M12-FKM-PC-P-E-NC-ST80-NC 254 291 437 12.5 254±0.5 12 309
116247 HCK.254-ZN-M12-FKM-PC-P-E-NO-ST80-NO 254 291 437 12.5 254±0.5 12 309
117159 HCK.381-ZN-M12-FKM-PC-P-E-NC-ST80-NC 381 418 437 12.5 381±0.5 12 388
117157 HCK.381-ZN-M12-FKM-PC-P-E-NO-ST80-NO 381 418 437 12.5 381±0.5 12 388
118069 HCK.508-ZN-M12-FKM-PC-P-E-NC-ST80-NC 508 545 437 12.5 508±0.5 12 466
118067 HCK.508-ZN-M12-FKM-PC-P-E-NO-ST80-NO 508 545 437 12.5 508±0.5 12 466
113167 HCK.127-ZN-M12-FKM-PC-P-E-HT-NC-ST80-NC 127 164 437 12.5 127±0.5 12 231
113165 HCK.127-ZN-M12-FKM-PC-P-E-HT-NO-ST80-NO 127 164 437 12.5 127±0.5 12 231
114167 HCK.176-ZN-M12-FKM-PC-P-E-HT-NC-ST80-NC 176 213 437 12.5 176±0.5 12 261
114165 HCK.176-ZN-M12-FKM-PC-P-E-HT-NO-ST80-NO 176 213 437 12.5 176±0.5 12 261
116267 HCK.254-ZN-M12-FKM-PC-P-E-HT-NC-ST80-NC 254 291 437 12.5 254±0.5 12 309
116265 HCK.254-ZN-M12-FKM-PC-P-E-HT-NO-ST80-NO 254 291 437 12.5 254±0.5 12 309
117177 HCK.381-ZN-M12-FKM-PC-P-E-HT-NC-ST80-NC 381 418 437 12.5 381±0.5 12 388
117175 HCK.381-ZN-M12-FKM-PC-P-E-HT-NO-ST80-NO 381 418 437 12.5 381±0.5 12 388
118087 HCK.508-ZN-M12-FKM-PC-P-E-HT-NC-ST80-NC 508 545 437 12.5 508±0.5 12 466
118085 HCK.508-ZN-M12-FKM-PC-P-E-HT-NO-ST80-NO 508 545 437 12.5 508±0.5 12 466
113061 HCK.127-ZN-M12-NBR-GL-P-E-NC-ST80-NC 127 164 437 12.5 127±0.5 12 231
113059 HCK.127-ZN-M12-NBR-GL-P-E-NO-ST80-NO 127 164 437 12.5 127±0.5 12 231
114061 HCK.176-ZN-M12-NBR-GL-P-E-NC-ST80-NC 176 213 437 12.5 176±0.5 12 261
114059 HCK.176-ZN-M12-NBR-GL-P-E-NO-ST80-NO 176 213 437 12.5 176±0.5 12 261
116161 HCK.254-ZN-M12-NBR-GL-P-E-NC-ST80-NC 254 291 437 12.5 254±0.5 12 309
116159 HCK.254-ZN-M12-NBR-GL-P-E-NO-ST80-NO 254 291 437 12.5 254±0.5 12 309
117061 HCK.381-ZN-M12-NBR-GL-P-E-NC-ST80-NC 381 418 437 12.5 381±0.5 12 388
117059 HCK.381-ZN-M12-NBR-GL-P-E-NO-ST80-NO 381 418 437 12.5 381±0.5 12 388
117961 HCK.508-ZN-M12-NBR-GL-P-E-NC-ST80-NC 508 545 437 12.5 508±0.5 12 466
117959 HCK.508-ZN-M12-NBR-GL-P-E-NO-ST80-NO 508 545 437 12.5 508±0.5 12 466
113193 HCK.127-ZN-M12-FKM-GL-P-E-NC-ST80-NC 127 164 437 12.5 127±0.5 12 231
113191 HCK.127-ZN-M12-FKM-GL-P-E-NO-ST80-NO 127 164 437 12.5 127±0.5 12 231
114193 HCK.176-ZN-M12-FKM-GL-P-E-NC-ST80-NC 176 213 437 12.5 176±0.5 12 261
114191 HCK.176-ZN-M12-FKM-GL-P-E-NO-ST80-NO 176 213 437 12.5 176±0.5 12 261
116293 HCK.254-ZN-M12-FKM-GL-P-E-NC-ST80-NC 254 291 437 12.5 254±0.5 12 309
116291 HCK.254-ZN-M12-FKM-GL-P-E-NO-ST80-NO 254 291 437 12.5 254±0.5 12 309
117203 HCK.381-ZN-M12-FKM-GL-P-E-NC-ST80-NC 381 418 437 12.5 381±0.5 12 388
117201 HCK.381-ZN-M12-FKM-GL-P-E-NO-ST80-NO 381 418 437 12.5 381±0.5 12 388
118113 HCK.508-ZN-M12-FKM-GL-P-E-NC-ST80-NC 508 545 437 12.5 508±0.5 12 466
118111 HCK.508-ZN-M12-FKM-GL-P-E-NO-ST80-NO 508 545 437 12.5 508±0.5 12 466
113211 HCK.127-ZN-M12-FKM-GL-P-E-HT-NC-ST80-NC 127 164 437 12.5 127±0.5 12 231
113209 HCK.127-ZN-M12-FKM-GL-P-E-HT-NO-ST80-NO 127 164 437 12.5 127±0.5 12 231
114211 HCK.176-ZN-M12-FKM-GL-P-E-HT-NC-ST80-NC 176 213 437 12.5 176±0.5 12 261
114209 HCK.176-ZN-M12-FKM-GL-P-E-HT-NO-ST80-NO 176 213 437 12.5 176±0.5 12 261
116311 HCK.254-ZN-M12-FKM-GL-P-E-HT-NC-ST80-NC 254 291 437 12.5 254±0.5 12 309
116309 HCK.254-ZN-M12-FKM-GL-P-E-HT-NO-ST80-NO 254 291 437 12.5 254±0.5 12 309
117221 HCK.381-ZN-M12-FKM-GL-P-E-HT-NC-ST80-NC 381 418 437 12.5 381±0.5 12 388
117219 HCK.381-ZN-M12-FKM-GL-P-E-HT-NO-ST80-NO 381 418 437 12.5 381±0.5 12 388
118131 HCK.508-ZN-M12-FKM-GL-P-E-HT-NC-ST80-NC 508 545 437 12.5 508±0.5 12 466
118129 HCK.508-ZN-M12-FKM-GL-P-E-HT-NO-ST80-NO 508 545 437 12.5 508±0.5 12 466
HCK-E-ST
Filter
Code Description f L e d'-0.2 f' C#
[Nm]
Weight
113319 HCK.127-SST-M12-NBR-PC-P-E-NC-ST80-NC 127 164 437 12.5 127±0.5 12 231
113317 HCK.127-SST-M12-NBR-PC-P-E-NO-ST80-NO 127 164 437 12.5 127±0.5 12 231
114289 HCK.176-SST-M12-NBR-PC-P-E-NC-ST80-NC 176 213 437 12.5 176±0.5 12 261
114287 HCK.176-SST-M12-NBR-PC-P-E-NO-ST80-NO 176 213 437 12.5 176±0.5 12 261
116399 HCK.254-SST-M12-NBR-PC-P-E-NC-ST80-NC 254 291 437 12.5 254±0.5 12 309
116397 HCK.254-SST-M12-NBR-PC-P-E-NO-ST80-NO 254 291 437 12.5 254±0.5 12 309
117309 HCK.381-SST-M12-NBR-PC-P-E-NC-ST80-NC 381 418 437 12.5 381±0.5 12 388
117307 HCK.381-SST-M12-NBR-PC-P-E-NO-ST80-NO 381 418 437 12.5 381±0.5 12 388
118219 HCK.508-SST-M12-NBR-PC-P-E-NC-ST80-NC 508 545 437 12.5 508±0.5 12 466
118217 HCK.508-SST-M12-NBR-PC-P-E-NO-ST80-NO 508 545 437 12.5 508±0.5 12 466
113451 HCK.127-SST-M12-FKM-PC-P-E-NC-ST80-NC 127 164 437 12.5 127±0.5 12 231
113449 HCK.127-SST-M12-FKM-PC-P-E-NO-ST80-NO 127 164 437 12.5 127±0.5 12 231
114429 HCK.176-SST-M12-FKM-PC-P-E-NC-ST80-NC 176 213 437 12.5 176±0.5 12 261
114427 HCK.176-SST-M12-FKM-PC-P-E-NO-ST80-NO 176 213 437 12.5 176±0.5 12 261
116539 HCK.254-SST-M12-FKM-PC-P-E-NC-ST80-NC 254 291 437 12.5 254±0.5 12 309
116537 HCK.254-SST-M12-FKM-PC-P-E-NO-ST80-NO 254 291 437 12.5 254±0.5 12 309
117449 HCK.381-SST-M12-FKM-PC-P-E-NC-ST80-NC 381 418 437 12.5 381±0.5 12 388
117447 HCK.381-SST-M12-FKM-PC-P-E-NO-ST80-NO 381 418 437 12.5 381±0.5 12 388
118359 HCK.508-SST-M12-FKM-PC-P-E-NC-ST80-NC 508 545 437 12.5 508±0.5 12 466
118357 HCK.508-SST-M12-FKM-PC-P-E-NO-ST80-NO 508 545 437 12.5 508±0.5 12 466
113469 HCK.127-SST-M12-FKM-PC-P-E-HT-NC-ST80-NC 127 164 437 12.5 127±0.5 12 231
113467 HCK.127-SST-M12-FKM-PC-P-E-HT-NO-ST80-NO 127 164 437 12.5 127±0.5 12 231
114447 HCK.176-SST-M12-FKM-PC-P-E-HT-NC-ST80-NC 176 213 437 12.5 176±0.5 12 261
114445 HCK.176-SST-M12-FKM-PC-P-E-HT-NO-ST80-NO 176 213 437 12.5 176±0.5 12 261
116557 HCK.254-SST-M12-FKM-PC-P-E-HT-NC-ST80-NC 254 291 437 12.5 254±0.5 12 309
116555 HCK.254-SST-M12-FKM-PC-P-E-HT-NO-ST80-NO 254 291 437 12.5 254±0.5 12 309
117467 HCK.381-SST-M12-FKM-PC-P-E-HT-NC-ST80-NC 381 418 437 12.5 381±0.5 12 388
117465 HCK.381-SST-M12-FKM-PC-P-E-HT-NO-ST80-NO 381 418 437 12.5 381±0.5 12 388
118377 HCK.508-SST-M12-FKM-PC-P-E-HT-NC-ST80-NC 508 545 437 12.5 508±0.5 12 466
118375 HCK.508-SST-M12-FKM-PC-P-E-HT-NO-ST80-NO 508 545 437 12.5 508±0.5 12 466
113363 HCK.127-SST-M12-NBR-GL-P-E-NC-ST80-NC 127 164 437 12.5 127±0.5 12 231
113361 HCK.127-SST-M12-NBR-GL-P-E-NO-ST80-NO 127 164 437 12.5 127±0.5 12 231
114333 HCK.176-SST-M12-NBR-GL-P-E-NC-ST80-NC 176 213 437 12.5 176±0.5 12 261
114331 HCK.176-SST-M12-NBR-GL-P-E-NO-ST80-NO 176 213 437 12.5 176±0.5 12 261
116443 HCK.254-SST-M12-NBR-GL-P-E-NC-ST80-NC 254 291 437 12.5 254±0.5 12 309
116441 HCK.254-SST-M12-NBR-GL-P-E-NO-ST80-NO 254 291 437 12.5 254±0.5 12 309
117353 HCK.381-SST-M12-NBR-GL-P-E-NC-ST80-NC 381 418 437 12.5 381±0.5 12 388
117351 HCK.381-SST-M12-NBR-GL-P-E-NO-ST80-NO 381 418 437 12.5 381±0.5 12 388
118263 HCK.508-SST-M12-NBR-GL-P-E-NC-ST80-NC 508 545 437 12.5 508±0.5 12 466
118261 HCK.508-SST-M12-NBR-GL-P-E-NO-ST80-NO 508 545 437 12.5 508±0.5 12 466
113493 HCK.127-SST-M12-FKM-GL-P-E-NC-ST80-NC 127 164 437 12.5 127±0.5 12 231
113491 HCK.127-SST-M12-FKM-GL-P-E-NO-ST80-NO 127 164 437 12.5 127±0.5 12 231
114471 HCK.176-SST-M12-FKM-GL-P-E-NC-ST80-NC 176 213 437 12.5 176±0.5 12 261
114469 HCK.176-SST-M12-FKM-GL-P-E-NO-ST80-NO 176 213 437 12.5 176±0.5 12 261
116581 HCK.254-SST-M12-FKM-GL-P-E-NC-ST80-NC 254 291 437 12.5 254±0.5 12 309
116579 HCK.254-SST-M12-FKM-GL-P-E-NO-ST80-NO 254 291 437 12.5 254±0.5 12 309
117491 HCK.381-SST-M12-FKM-GL-P-E-NC-ST80-NC 381 418 437 12.5 381±0.5 12 388
117489 HCK.381-SST-M12-FKM-GL-P-E-NO-ST80-NO 381 418 437 12.5 381±0.5 12 388
118401 HCK.508-SST-M12-FKM-GL-P-E-NC-ST80-NC 508 545 437 12.5 508±0.5 12 466
118399 HCK.508-SST-M12-FKM-GL-P-E-NO-ST80-NO 508 545 437 12.5 508±0.5 12 466
113511 HCK.127-SST-M12-FKM-GL-P-E-HT-NC-ST80-NC 127 164 437 12.5 127±0.5 12 231
113509 HCK.127-SST-M12-FKM-GL-P-E-HT-NO-ST80-NO 127 164 437 12.5 127±0.5 12 231
114489 HCK.176-SST-M12-FKM-GL-P-E-HT-NC-ST80-NC 176 213 437 12.5 176±0.5 12 261
114487 HCK.176-SST-M12-FKM-GL-P-E-HT-NO-ST80-NO 176 213 437 12.5 176±0.5 12 261
116599 HCK.254-SST-M12-FKM-GL-P-E-HT-NC-ST80-NC 254 291 437 12.5 254±0.5 12 309
116597 HCK.254-SST-M12-FKM-GL-P-E-HT-NO-ST80-NO 254 291 437 12.5 254±0.5 12 309
117509 HCK.381-SST-M12-FKM-GL-P-E-HT-NC-ST80-NC 381 418 437 12.5 381±0.5 12 388
117507 HCK.381-SST-M12-FKM-GL-P-E-HT-NO-ST80-NO 381 418 437 12.5 381±0.5 12 388
118419 HCK.508-SST-M12-FKM-GL-P-E-HT-NC-ST80-NC 508 545 437 12.5 508±0.5 12 466
118417 HCK.508-SST-M12-FKM-GL-P-E-HT-NO-ST80-NO 508 545 437 12.5 508±0.5 12 466
HCK-E-STL with MIN level electrical sensor and temperature electrical probe
HCK-E-STL with MIN level electrical sensor and temperature electrical probe
HCK-E-STL with MIN level electrical sensor and temperature electrical probe
HCK-E-STL
Filter
Code Description f L e d'-0.2 f' C#
[Nm]
Weight
113025 HCK.127-ZN-M12-NBR-PC-P-E-NC-STL 127 164 56 12.5 127±0.5 12 231
113023 HCK.127-ZN-M12-NBR-PC-P-E-NO-STL 127 164 56 12.5 127±0.5 12 231
114025 HCK.176-ZN-M12-NBR-PC-P-E-NC-STL 176 213 105 12.5 176±0.5 12 261
114023 HCK.176-ZN-M12-NBR-PC-P-E-NO-STL 176 213 105 12.5 176±0.5 12 261
116125 HCK.254-ZN-M12-NBR-PC-P-E-NC-STL 254 291 183 12.5 254±0.5 12 309
116123 HCK.254-ZN-M12-NBR-PC-P-E-NO-STL 254 291 183 12.5 254±0.5 12 309
117025 HCK.381-ZN-M12-NBR-PC-P-E-NC-STL 381 418 310 12.5 381±0.5 12 388
117023 HCK.381-ZN-M12-NBR-PC-P-E-NO-STL 381 418 310 12.5 381±0.5 12 388
117925 HCK.508-ZN-M12-NBR-PC-P-E-NC-STL 508 545 437 12.5 508±0.5 12 466
117923 HCK.508-ZN-M12-NBR-PC-P-E-NO-STL 508 545 437 12.5 508±0.5 12 466
113155 HCK.127-ZN-M12-FKM-PC-P-E-NC-STL 127 164 437 12.5 127±0.5 12 231
113153 HCK.127-ZN-M12-FKM-PC-P-E-NO-STL 127 164 437 12.5 127±0.5 12 231
114155 HCK.176-ZN-M12-FKM-PC-P-E-NC-STL 176 213 437 12.5 176±0.5 12 261
114153 HCK.176-ZN-M12-FKM-PC-P-E-NO-STL 176 213 437 12.5 176±0.5 12 261
116255 HCK.254-ZN-M12-FKM-PC-P-E-NC-STL 254 291 437 12.5 254±0.5 12 309
116253 HCK.254-ZN-M12-FKM-PC-P-E-NO-STL 254 291 437 12.5 254±0.5 12 309
117165 HCK.381-ZN-M12-FKM-PC-P-E-NC-STL 381 418 437 12.5 381±0.5 12 388
117163 HCK.381-ZN-M12-FKM-PC-P-E-NO-STL 381 418 437 12.5 381±0.5 12 388
118075 HCK.508-ZN-M12-FKM-PC-P-E-NC-STL 508 545 437 12.5 508±0.5 12 466
118073 HCK.508-ZN-M12-FKM-PC-P-E-NO-STL 508 545 437 12.5 508±0.5 12 466
113173 HCK.127-ZN-M12-FKM-PC-P-E-HT-NC-STL 127 164 437 12.5 127±0.5 12 231
113171 HCK.127-ZN-M12-FKM-PC-P-E-HT-NO-STL 127 164 437 12.5 127±0.5 12 231
114173 HCK.176-ZN-M12-FKM-PC-P-E-HT-NC-STL 176 213 437 12.5 176±0.5 12 261
114171 HCK.176-ZN-M12-FKM-PC-P-E-HT-NO-STL 176 213 437 12.5 176±0.5 12 261
116273 HCK.254-ZN-M12-FKM-PC-P-E-HT-NC-STL 254 291 437 12.5 254±0.5 12 309
116271 HCK.254-ZN-M12-FKM-PC-P-E-HT-NO-STL 254 291 437 12.5 254±0.5 12 309
117183 HCK.381-ZN-M12-FKM-PC-P-E-HT-NC-STL 381 418 437 12.5 381±0.5 12 388
117181 HCK.381-ZN-M12-FKM-PC-P-E-HT-NO-STL 381 418 437 12.5 381±0.5 12 388
118093 HCK.508-ZN-M12-FKM-PC-P-E-HT-NC-STL 508 545 437 12.5 508±0.5 12 466
118091 HCK.508-ZN-M12-FKM-PC-P-E-HT-NO-STL 508 545 437 12.5 508±0.5 12 466
113067 HCK.127-ZN-M12-NBR-GL-P-E-NC-STL 127 164 437 12.5 127±0.5 12 231
113065 HCK.127-ZN-M12-NBR-GL-P-E-NO-STL 127 164 437 12.5 127±0.5 12 231
114067 HCK.176-ZN-M12-NBR-GL-P-E-NC-STL 176 213 437 12.5 176±0.5 12 261
114065 HCK.176-ZN-M12-NBR-GL-P-E-NO-STL 176 213 437 12.5 176±0.5 12 261
116167 HCK.254-ZN-M12-NBR-GL-P-E-NC-STL 254 291 437 12.5 254±0.5 12 309
116165 HCK.254-ZN-M12-NBR-GL-P-E-NO-STL 254 291 437 12.5 254±0.5 12 309
117067 HCK.381-ZN-M12-NBR-GL-P-E-NC-STL 381 418 437 12.5 381±0.5 12 388
117065 HCK.381-ZN-M12-NBR-GL-P-E-NO-STL 381 418 437 12.5 381±0.5 12 388
117967 HCK.508-ZN-M12-NBR-GL-P-E-NC-STL 508 545 437 12.5 508±0.5 12 466
117965 HCK.508-ZN-M12-NBR-GL-P-E-NO-STL 508 545 437 12.5 508±0.5 12 466
113199 HCK.127-ZN-M12-FKM-GL-P-E-NC-STL 127 164 437 12.5 127±0.5 12 231
113197 HCK.127-ZN-M12-FKM-GL-P-E-NO-STL 127 164 437 12.5 127±0.5 12 231
114199 HCK.176-ZN-M12-FKM-GL-P-E-NC-STL 176 213 437 12.5 176±0.5 12 261
114197 HCK.176-ZN-M12-FKM-GL-P-E-NO-STL 176 213 437 12.5 176±0.5 12 261
116299 HCK.254-ZN-M12-FKM-GL-P-E-NC-STL 254 291 437 12.5 254±0.5 12 309
116297 HCK.254-ZN-M12-FKM-GL-P-E-NO-STL 254 291 437 12.5 254±0.5 12 309
117209 HCK.381-ZN-M12-FKM-GL-P-E-NC-STL 381 418 437 12.5 381±0.5 12 388
117207 HCK.381-ZN-M12-FKM-GL-P-E-NO-STL 381 418 437 12.5 381±0.5 12 388
118119 HCK.508-ZN-M12-FKM-GL-P-E-NC-STL 508 545 437 12.5 508±0.5 12 466
118117 HCK.508-ZN-M12-FKM-GL-P-E-NO-STL 508 545 437 12.5 508±0.5 12 466
113217 HCK.127-ZN-M12-FKM-GL-P-E-HT-NC-STL 127 164 437 12.5 127±0.5 12 231
113215 HCK.127-ZN-M12-FKM-GL-P-E-HT-NO-STL 127 164 437 12.5 127±0.5 12 231
114217 HCK.176-ZN-M12-FKM-GL-P-E-HT-NC-STL 176 213 437 12.5 176±0.5 12 261
114215 HCK.176-ZN-M12-FKM-GL-P-E-HT-NO-STL 176 213 437 12.5 176±0.5 12 261
116317 HCK.254-ZN-M12-FKM-GL-P-E-HT-NC-STL 254 291 437 12.5 254±0.5 12 309
116315 HCK.254-ZN-M12-FKM-GL-P-E-HT-NO-STL 254 291 437 12.5 254±0.5 12 309
117227 HCK.381-ZN-M12-FKM-GL-P-E-HT-NC-STL 381 418 437 12.5 381±0.5 12 388
117225 HCK.381-ZN-M12-FKM-GL-P-E-HT-NO-STL 381 418 437 12.5 381±0.5 12 388
118137 HCK.508-ZN-M12-FKM-GL-P-E-HT-NC-STL 508 545 437 12.5 508±0.5 12 466
118135 HCK.508-ZN-M12-FKM-GL-P-E-HT-NO-STL 508 545 437 12.5 508±0.5 12 466
HCK-E-STL
Filter
Code Description f L e d'-0.2 f' C#
[Nm]
Weight
113325 HCK.127-SST-M12-NBR-PC-P-E-NC-STL 127 164 437 12.5 127±0.5 12 231
113323 HCK.127-SST-M12-NBR-PC-P-E-NO-STL 127 164 437 12.5 127±0.5 12 231
114295 HCK.176-SST-M12-NBR-PC-P-E-NC-STL 176 213 437 12.5 176±0.5 12 261
114293 HCK.176-SST-M12-NBR-PC-P-E-NO-STL 176 213 437 12.5 176±0.5 12 261
116405 HCK.254-SST-M12-NBR-PC-P-E-NC-STL 254 291 437 12.5 254±0.5 12 309
116403 HCK.254-SST-M12-NBR-PC-P-E-NO-STL 254 291 437 12.5 254±0.5 12 309
117315 HCK.381-SST-M12-NBR-PC-P-E-NC-STL 381 418 437 12.5 381±0.5 12 388
117313 HCK.381-SST-M12-NBR-PC-P-E-NO-STL 381 418 437 12.5 381±0.5 12 388
118225 HCK.508-SST-M12-NBR-PC-P-E-NC-STL 508 545 437 12.5 508±0.5 12 466
118223 HCK.508-SST-M12-NBR-PC-P-E-NO-STL 508 545 437 12.5 508±0.5 12 466
113457 HCK.127-SST-M12-FKM-PC-P-E-NC-STL 127 164 437 12.5 127±0.5 12 231
113455 HCK.127-SST-M12-FKM-PC-P-E-NO-STL 127 164 437 12.5 127±0.5 12 231
114435 HCK.176-SST-M12-FKM-PC-P-E-NC-STL 176 213 437 12.5 176±0.5 12 261
114433 HCK.176-SST-M12-FKM-PC-P-E-NO-STL 176 213 437 12.5 176±0.5 12 261
116545 HCK.254-SST-M12-FKM-PC-P-E-NC-STL 254 291 437 12.5 254±0.5 12 309
116543 HCK.254-SST-M12-FKM-PC-P-E-NO-STL 254 291 437 12.5 254±0.5 12 309
117455 HCK.381-SST-M12-FKM-PC-P-E-NC-STL 381 418 437 12.5 381±0.5 12 388
117453 HCK.381-SST-M12-FKM-PC-P-E-NO-STL 381 418 437 12.5 381±0.5 12 388
118365 HCK.508-SST-M12-FKM-PC-P-E-NC-STL 508 545 437 12.5 508±0.5 12 466
118363 HCK.508-SST-M12-FKM-PC-P-E-NO-STL 508 545 437 12.5 508±0.5 12 466
113475 HCK.127-SST-M12-FKM-PC-P-E-HT-NC-STL 127 164 437 12.5 127±0.5 12 231
113473 HCK.127-SST-M12-FKM-PC-P-E-HT-NO-STL 127 164 437 12.5 127±0.5 12 231
114453 HCK.176-SST-M12-FKM-PC-P-E-HT-NC-STL 176 213 437 12.5 176±0.5 12 261
114451 HCK.176-SST-M12-FKM-PC-P-E-HT-NO-STL 176 213 437 12.5 176±0.5 12 261
116563 HCK.254-SST-M12-FKM-PC-P-E-HT-NC-STL 254 291 437 12.5 254±0.5 12 309
116561 HCK.254-SST-M12-FKM-PC-P-E-HT-NO-STL 254 291 437 12.5 254±0.5 12 309
117473 HCK.381-SST-M12-FKM-PC-P-E-HT-NC-STL 381 418 437 12.5 381±0.5 12 388
117471 HCK.381-SST-M12-FKM-PC-P-E-HT-NO-STL 381 418 437 12.5 381±0.5 12 388
118383 HCK.508-SST-M12-FKM-PC-P-E-HT-NC-STL 508 545 437 12.5 508±0.5 12 466
118381 HCK.508-SST-M12-FKM-PC-P-E-HT-NO-STL 508 545 437 12.5 508±0.5 12 466
113369 HCK.127-SST-M12-NBR-GL-P-E-NC-STL 127 164 437 12.5 127±0.5 12 231
113367 HCK.127-SST-M12-NBR-GL-P-E-NO-STL 127 164 437 12.5 127±0.5 12 231
114339 HCK.176-SST-M12-NBR-GL-P-E-NC-STL 176 213 437 12.5 176±0.5 12 261
114337 HCK.176-SST-M12-NBR-GL-P-E-NO-STL 176 213 437 12.5 176±0.5 12 261
116449 HCK.254-SST-M12-NBR-GL-P-E-NC-STL 254 291 437 12.5 254±0.5 12 309
116447 HCK.254-SST-M12-NBR-GL-P-E-NO-STL 254 291 437 12.5 254±0.5 12 309
117359 HCK.381-SST-M12-NBR-GL-P-E-NC-STL 381 418 437 12.5 381±0.5 12 388
117357 HCK.381-SST-M12-NBR-GL-P-E-NO-STL 381 418 437 12.5 381±0.5 12 388
118269 HCK.508-SST-M12-NBR-GL-P-E-NC-STL 508 545 437 12.5 508±0.5 12 466
118267 HCK.508-SST-M12-NBR-GL-P-E-NO-STL 508 545 437 12.5 508±0.5 12 466
113499 HCK.127-SST-M12-FKM-GL-P-E-NC-STL 127 164 437 12.5 127±0.5 12 231
113497 HCK.127-SST-M12-FKM-GL-P-E-NO-STL 127 164 437 12.5 127±0.5 12 231
114477 HCK.176-SST-M12-FKM-GL-P-E-NC-STL 176 213 437 12.5 176±0.5 12 261
114475 HCK.176-SST-M12-FKM-GL-P-E-NO-STL 176 213 437 12.5 176±0.5 12 261
116587 HCK.254-SST-M12-FKM-GL-P-E-NC-STL 254 291 437 12.5 254±0.5 12 309
116585 HCK.254-SST-M12-FKM-GL-P-E-NO-STL 254 291 437 12.5 254±0.5 12 309
117497 HCK.381-SST-M12-FKM-GL-P-E-NC-STL 381 418 437 12.5 381±0.5 12 388
117495 HCK.381-SST-M12-FKM-GL-P-E-NO-STL 381 418 437 12.5 381±0.5 12 388
118407 HCK.508-SST-M12-FKM-GL-P-E-NC-STL 508 545 437 12.5 508±0.5 12 466
118405 HCK.508-SST-M12-FKM-GL-P-E-NO-STL 508 545 437 12.5 508±0.5 12 466
113517 HCK.127-SST-M12-FKM-GL-P-E-HT-NC-STL 127 164 437 12.5 127±0.5 12 231
113515 HCK.127-SST-M12-FKM-GL-P-E-HT-NO-STL 127 164 437 12.5 127±0.5 12 231
114495 HCK.176-SST-M12-FKM-GL-P-E-HT-NC-STL 176 213 437 12.5 176±0.5 12 261
114493 HCK.176-SST-M12-FKM-GL-P-E-HT-NO-STL 176 213 437 12.5 176±0.5 12 261
116605 HCK.254-SST-M12-FKM-GL-P-E-HT-NC-STL 254 291 437 12.5 254±0.5 12 309
116603 HCK.254-SST-M12-FKM-GL-P-E-HT-NO-STL 254 291 437 12.5 254±0.5 12 309
117515 HCK.381-SST-M12-FKM-GL-P-E-HT-NC-STL 381 418 437 12.5 381±0.5 12 388
117513 HCK.381-SST-M12-FKM-GL-P-E-HT-NO-STL 381 418 437 12.5 381±0.5 12 388
118425 HCK.508-SST-M12-FKM-GL-P-E-HT-NC-STL 508 545 437 12.5 508±0.5 12 466
118423 HCK.508-SST-M12-FKM-GL-P-E-HT-NO-STL 508 545 437 12.5 508±0.5 12 466